[PATCH v1 2/3] powerpc/powernv: Support PCI error injection
Michael Neuling
mikey at neuling.org
Mon Jun 23 16:36:44 EST 2014
On Mon, 2014-06-23 at 12:14 +1000, Gavin Shan wrote:
> The patch implements one OPAL firmware sysfs file to support PCI error
> injection: "/sys/firmware/opal/errinjct", which will be used like the
> way described as follows.
>
> According to PAPR spec, there are 3 RTAS calls related to error injection:
> "ibm,open-errinjct": allocate token prior to doing error injection.
> "ibm,close-errinjct": release the token allocated from "ibm,open-errinjct".
> "ibm,errinjct": do error injection.
>
> Sysfs file /sys/firmware/opal/errinjct accepts strings that have fixed
> format "ei_token ...". For now, we only support 32-bits and 64-bits
> PCI error injection and they should have following strings written to
> /sys/firmware/opal/errinjct as follows. We don't have corresponding
> sysfs files for "ibm,open-errinjct" and "ibm,close-errinjct", which
> means that we rely on userland to maintain the token by itself.
This sounds cool.
Can you document the sysfs interface in Documentation/powerpc?
Mikey
>
> 32-bits PCI error: "7:addr:mask:iommu_group_id:function".
> 64-bits PCI error: "8:addr:mask:iommu_group_id:function".
>
> The above "7" and "8" represent 32-bits and 64-bits PCI error seperately
> and "function" is one of the specific PCI errors (e.g. MMIO access address
> parity error), which are defined by PAPR spec.
>
> Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/opal.h | 1 +
> arch/powerpc/platforms/powernv/Makefile | 2 +-
> arch/powerpc/platforms/powernv/opal-errinjct.c | 184 +++++++++++++++++++++++++
> arch/powerpc/platforms/powernv/opal.c | 2 +
> 4 files changed, 188 insertions(+), 1 deletion(-)
> create mode 100644 arch/powerpc/platforms/powernv/opal-errinjct.c
>
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index d982bb8..bf280d9 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -985,6 +985,7 @@ extern int opal_elog_init(void);
> extern void opal_platform_dump_init(void);
> extern void opal_sys_param_init(void);
> extern void opal_msglog_init(void);
> +extern void opal_errinjct_init(void);
>
> extern int opal_machine_check(struct pt_regs *regs);
> extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
> diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
> index 63cebb9..4711de8 100644
> --- a/arch/powerpc/platforms/powernv/Makefile
> +++ b/arch/powerpc/platforms/powernv/Makefile
> @@ -1,7 +1,7 @@
> obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
> obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
> obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
> -obj-y += opal-msglog.o
> +obj-y += opal-msglog.o opal-errinjct.o
>
> obj-$(CONFIG_SMP) += smp.o
> obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
> diff --git a/arch/powerpc/platforms/powernv/opal-errinjct.c b/arch/powerpc/platforms/powernv/opal-errinjct.c
> new file mode 100644
> index 0000000..29c9e83
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/opal-errinjct.c
> @@ -0,0 +1,184 @@
> +/*
> + * The file supports error injection, which works based on OPAL API.
> + * For now, we only support PCI error injection. We need support
> + * injecting other types of errors in future.
> + *
> + * Copyright Gavin Shan, IBM Corporation 2014.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/msi.h>
> +#include <linux/pci.h>
> +#include <linux/iommu.h>
> +#include <linux/random.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/fs.h>
> +#include <linux/fcntl.h>
> +#include <linux/kobject.h>
> +
> +#include <asm/msi_bitmap.h>
> +#include <asm/iommu.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/ppc-pci.h>
> +#include <asm/opal.h>
> +
> +#include "powernv.h"
> +#include "pci.h"
> +
> +static DEFINE_MUTEX(errinjct_mutex);
> +
> +static int errinjct_iommu_group_to_phb_and_pe(uint32_t iommu_grp_id,
> + uint64_t *phb_id,
> + uint32_t *pe_num)
> +{
> +#ifdef CONFIG_IOMMU_API
> + struct iommu_group *iommu_grp;
> + struct iommu_table *tbl;
> + struct pnv_ioda_pe *pe;
> +
> + iommu_grp = iommu_group_get_by_id(iommu_grp_id);
> + if (!iommu_grp)
> + return -ENODEV;
> +
> + tbl = iommu_group_get_iommudata(iommu_grp);
> + if (!tbl)
> + return -ENODEV;
> +
> + pe = container_of(tbl, struct pnv_ioda_pe, tce32_table);
> + if (!pe->phb)
> + return -ENODEV;
> +
> + *phb_id = pe->phb->opal_id;
> + *pe_num = pe->pe_number;
> +
> + return 0;
> +#endif
> +
> + return -ENXIO;
> +}
> +
> +static int errinjct_ioa_bus_error(const char *buf, struct OpalErrinjct *ei)
> +{
> + uint32_t iommu_grp_id;
> + int ret;
> +
> + /* Extract parameters */
> + ret = sscanf(buf, "%x:%x:%x:%x:%x",
> + &ei->type, &ei->ioa.addr,
> + &ei->ioa.mask, &iommu_grp_id, ei->ioa.function);
> + if (ret != 5)
> + return -EINVAL;
> +
> + /* Invalid function ? */
> + if (ei->ioa.function < OpalEitIoaLoadMemAddr ||
> + ei->ioa.function > OpalEitIoaDmaWriteMemTarget)
> + return -ERANGE;
> +
> + /* Retrieve PHB ID and PE number */
> + ret = errinjct_iommu_group_to_phb_and_pe(iommu_grp_id,
> + &ei->ioa.phb_id,
> + &ei->ioa.pe);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int errinjct_ioa_bus_error64(const char *buf, struct OpalErrinjct *ei)
> +{
> + uint32_t iommu_grp_id;
> + int ret;
> +
> + /* Extract parameter */
> + ret = sscanf(buf, "%x:%llx:%llx:%x:%x",
> + &ei->type, &ei->ioa64.addr,
> + &ei->ioa64.mask, &iommu_grp_id, &ei->ioa64.function);
> + if (ret != 5)
> + return -EINVAL;
> +
> + /* Invalid function ? */
> + if (ei->ioa64.function < OpalEitIoaLoadMemAddr ||
> + ei->ioa64.function > OpalEitIoaDmaWriteMemTarget)
> + return -ERANGE;
> +
> + /* Retrieve PHB ID and PE number */
> + ret = errinjct_iommu_group_to_phb_and_pe(iommu_grp_id,
> + &ei->ioa64.phb_id,
> + &ei->ioa64.pe);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static ssize_t errinjct_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct OpalErrinjct ei;
> + int ret;
> + long rc;
> +
> + /* Extract common parameters */
> + ret = sscanf(buf, "%x", &ei.type);
> + if (ret != 1)
> + return -EINVAL;
> +
> + /* Error injection might be in progress */
> + if (!mutex_trylock(&errinjct_mutex))
> + return -EAGAIN;
> +
> + switch (ei.type) {
> + case OpalErrinjctTypeIoaBusError:
> + ret = errinjct_ioa_bus_error(buf, &ei);
> + break;
> + case OpalErrinjctTypeIoaBusError64:
> + ret = errinjct_ioa_bus_error64(buf, &ei);
> + break;
> + default:
> + ret = -ERANGE;
> + }
> +
> + /* Invalid parameters ? */
> + if (ret)
> + goto mutex_unlock_exit;
> +
> + /* OPAL call */
> + rc = opal_err_injct(&ei);
> + if (rc == OPAL_SUCCESS)
> + ret = count;
> + else
> + ret = -EIO;
> +
> +mutex_unlock_exit:
> + mutex_unlock(&errinjct_mutex);
> + return ret;
> +}
> +
> +static struct kobj_attribute errinjct_attr =
> + __ATTR(errinjct, 0600, NULL, errinjct_store);
> +
> +void __init opal_errinjct_init(void)
> +{
> + int ret;
> +
> + /* Make sure /sys/firmware/opal directory is created */
> + if (!opal_kobj) {
> + pr_warn("%s: opal kobject is not available\n",
> + __func__);
> + return;
> + }
> +
> + /* Create the sysfs files */
> + ret = sysfs_create_file(opal_kobj, &errinjct_attr.attr);
> + if (ret)
> + pr_warn("%s: Cannot create sysfs file (%d)\n",
> + __func__, ret);
> +}
> diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
> index 360ad80c..cb29bb5 100644
> --- a/arch/powerpc/platforms/powernv/opal.c
> +++ b/arch/powerpc/platforms/powernv/opal.c
> @@ -604,6 +604,8 @@ static int __init opal_init(void)
> opal_sys_param_init();
> /* Setup message log interface. */
> opal_msglog_init();
> + /* Setup error injection interface */
> + opal_errinjct_init();
> }
>
> return 0;
More information about the Linuxppc-dev
mailing list