[PATCH 1/2] pcmcia: Remove m8xx_pcmcia driver
Scott Wood
scottwood at freescale.com
Sat Jun 21 11:02:06 EST 2014
This driver doesn't build, and apparently has not built since
arch/ppc was removed in 2008 (when mk_int_int_mask was removed
from asm/irq.h, among other build errors).
A few weeks ago I asked whether anyone was actively maintaining
this code, and got no positive response:
http://patchwork.ozlabs.org/patch/352082/
So, let's remove it.
Signed-off-by: Scott Wood <scottwood at freescale.com>
Cc: Vitaly Bordug <vitb at kernel.crashing.org>
Cc: linux-pcmcia at lists.infradead.org
Cc: Paul Bolle <pebolle at tiscali.nl>
---
arch/powerpc/include/asm/mpc8xx.h | 2 -
arch/powerpc/platforms/8xx/m8xx_setup.c | 2 -
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 61 --
drivers/pcmcia/Kconfig | 10 -
drivers/pcmcia/Makefile | 1 -
drivers/pcmcia/m8xx_pcmcia.c | 1168 --------------------------
6 files changed, 1244 deletions(-)
delete mode 100644 drivers/pcmcia/m8xx_pcmcia.c
diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
index 98f3c4f..8ab22e8 100644
--- a/arch/powerpc/include/asm/mpc8xx.h
+++ b/arch/powerpc/include/asm/mpc8xx.h
@@ -7,6 +7,4 @@
#ifndef __CONFIG_8xx_DEFS
#define __CONFIG_8xx_DEFS
-extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
#endif /* __CONFIG_8xx_DEFS */
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 587a282..623bb43 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -28,8 +28,6 @@
#include "mpc8xx.h"
-struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
extern int cpm_pic_init(void);
extern int cpm_get_irq(void);
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index c126258..3d5e4e1 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -46,61 +46,6 @@
static u32 __iomem *bcsr, *bcsr5;
-#ifdef CONFIG_PCMCIA_M8XX
-static void pcmcia_hw_setup(int slot, int enable)
-{
- if (enable)
- clrbits32(&bcsr[1], BCSR1_PCCEN);
- else
- setbits32(&bcsr[1], BCSR1_PCCEN);
-}
-
-static int pcmcia_set_voltage(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- return 1;
- default:
- return 1;
- }
-
- /* first, turn off all power */
- clrbits32(&bcsr[1], 0x00610000);
-
- /* enable new powersettings */
- setbits32(&bcsr[1], reg);
-
- return 0;
-}
-#endif
-
struct cpm_pin {
int port, pin, flags;
};
@@ -245,12 +190,6 @@ static void __init mpc885ads_setup_arch(void)
of_detach_node(np);
of_node_put(np);
}
-
-#ifdef CONFIG_PCMCIA_M8XX
- /* Set up board specific hook-ups.*/
- m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
- m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
-#endif
}
static int __init mpc885ads_probe(void)
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 0c657d6..087d7d7 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -144,16 +144,6 @@ config TCIC
"Bridge" is the name used for the hardware inside your computer that
PCMCIA cards are plugged into. If unsure, say N.
-config PCMCIA_M8XX
- tristate "MPC8xx PCMCIA support"
- depends on PCCARD && PPC && 8xx
- select PCCARD_IODYN if PCMCIA != n
- help
- Say Y here to include support for PowerPC 8xx series PCMCIA
- controller.
-
- This driver is also available as a module called m8xx_pcmcia.
-
config PCMCIA_ALCHEMY_DEVBOARD
tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
depends on MIPS_ALCHEMY && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 7745b51..e62c26b 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_PD6729) += pd6729.o
obj-$(CONFIG_I82365) += i82365.o
obj-$(CONFIG_I82092) += i82092.o
obj-$(CONFIG_TCIC) += tcic.o
-obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
obj-$(CONFIG_PCMCIA_SOC_COMMON) += soc_common.o
obj-$(CONFIG_PCMCIA_SA11XX_BASE) += sa11xx_base.o
obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
deleted file mode 100644
index 182034d..0000000
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ /dev/null
@@ -1,1168 +0,0 @@
-/*
- * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
- *
- * (C) 1999-2000 Magnus Damm <damm at opensource.se>
- * (C) 2001-2002 Montavista Software, Inc.
- * <mlocke at mvista.com>
- *
- * Support for two slots by Cyclades Corporation
- * <oliver.kurth at cyclades.de>
- * Further fixes, v2.6 kernel port
- * <marcelo.tosatti at cyclades.com>
- *
- * Some fixes, additions (C) 2005-2007 Montavista Software, Inc.
- * <vbordug at ru.mvista.com>
- *
- * "The ExCA standard specifies that socket controllers should provide
- * two IO and five memory windows per socket, which can be independently
- * configured and positioned in the host address space and mapped to
- * arbitrary segments of card address space. " - David A Hinds. 1999
- *
- * This controller does _not_ meet the ExCA standard.
- *
- * m8xx pcmcia controller brief info:
- * + 8 windows (attrib, mem, i/o)
- * + up to two slots (SLOT_A and SLOT_B)
- * + inputpins, outputpins, event and mask registers.
- * - no offset register. sigh.
- *
- * Because of the lacking offset register we must map the whole card.
- * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
- * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
- * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
- * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
- * They are maximum 64KByte each...
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fsl_devices.h>
-#include <linux/bitops.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/irq.h>
-#include <asm/fs_pd.h>
-
-#include <pcmcia/ss.h>
-
-#define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args)
-#define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args)
-
-static const char *version = "Version 0.06, Aug 2005";
-MODULE_LICENSE("Dual MPL/GPL");
-
-#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-
-/* The ADS board use SLOT_A */
-#ifdef CONFIG_ADS
-#define CONFIG_PCMCIA_SLOT_A
-#define CONFIG_BD_IS_MHZ
-#endif
-
-/* The FADS series are a mess */
-#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
-#define CONFIG_PCMCIA_SLOT_A
-#else
-#define CONFIG_PCMCIA_SLOT_B
-#endif
-#endif
-
-#if defined(CONFIG_MPC885ADS)
-#define CONFIG_PCMCIA_SLOT_A
-#define PCMCIA_GLITCHY_CD
-#endif
-
-/* Cyclades ACS uses both slots */
-#ifdef CONFIG_PRxK
-#define CONFIG_PCMCIA_SLOT_A
-#define CONFIG_PCMCIA_SLOT_B
-#endif
-
-#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
-
-#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
-
-#define PCMCIA_SOCKETS_NO 2
-/* We have only 8 windows, dualsocket support will be limited. */
-#define PCMCIA_MEM_WIN_NO 2
-#define PCMCIA_IO_WIN_NO 2
-#define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B"
-
-#elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B)
-
-#define PCMCIA_SOCKETS_NO 1
-/* full support for one slot */
-#define PCMCIA_MEM_WIN_NO 5
-#define PCMCIA_IO_WIN_NO 2
-
-/* define _slot_ to be able to optimize macros */
-
-#ifdef CONFIG_PCMCIA_SLOT_A
-#define _slot_ 0
-#define PCMCIA_SLOT_MSG "SLOT_A"
-#else
-#define _slot_ 1
-#define PCMCIA_SLOT_MSG "SLOT_B"
-#endif
-
-#else
-#error m8xx_pcmcia: Bad configuration!
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
-#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
-#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
-/* ------------------------------------------------------------------------- */
-
-static int pcmcia_schlvl;
-
-static DEFINE_SPINLOCK(events_lock);
-
-#define PCMCIA_SOCKET_KEY_5V 1
-#define PCMCIA_SOCKET_KEY_LV 2
-
-/* look up table for pgcrx registers */
-static u32 *m8xx_pgcrx[2];
-
-/*
- * This structure is used to address each window in the PCMCIA controller.
- *
- * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly
- * after pcmcia_win[n]...
- */
-
-struct pcmcia_win {
- u32 br;
- u32 or;
-};
-
-/*
- * For some reason the hardware guys decided to make both slots share
- * some registers.
- *
- * Could someone invent object oriented hardware ?
- *
- * The macros are used to get the right bit from the registers.
- * SLOT_A : slot = 0
- * SLOT_B : slot = 1
- */
-
-#define M8XX_PCMCIA_VS1(slot) (0x80000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS2(slot) (0x40000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS_MASK(slot) (0xc0000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4))
-
-#define M8XX_PCMCIA_WP(slot) (0x20000000 >> (slot << 4))
-#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4))
-#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4))
-#define M8XX_PCMCIA_BVD2(slot) (0x04000000 >> (slot << 4))
-#define M8XX_PCMCIA_BVD1(slot) (0x02000000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY(slot) (0x01000000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_L(slot) (0x00800000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_H(slot) (0x00400000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_R(slot) (0x00200000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_F(slot) (0x00100000 >> (slot << 4))
-#define M8XX_PCMCIA_MASK(slot) (0xFFFF0000 >> (slot << 4))
-
-#define M8XX_PCMCIA_POR_VALID 0x00000001
-#define M8XX_PCMCIA_POR_WRPROT 0x00000002
-#define M8XX_PCMCIA_POR_ATTRMEM 0x00000010
-#define M8XX_PCMCIA_POR_IO 0x00000018
-#define M8XX_PCMCIA_POR_16BIT 0x00000040
-
-#define M8XX_PGCRX(slot) m8xx_pgcrx[slot]
-
-#define M8XX_PGCRX_CXOE 0x00000080
-#define M8XX_PGCRX_CXRESET 0x00000040
-
-/* we keep one lookup table per socket to check flags */
-
-#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
-
-struct event_table {
- u32 regbit;
- u32 eventbit;
-};
-
-static const char driver_name[] = "m8xx-pcmcia";
-
-struct socket_info {
- void (*handler) (void *info, u32 events);
- void *info;
-
- u32 slot;
- pcmconf8xx_t *pcmcia;
- u32 bus_freq;
- int hwirq;
-
- socket_state_t state;
- struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
- struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
- struct event_table events[PCMCIA_EVENTS_MAX];
- struct pcmcia_socket socket;
-};
-
-static struct socket_info socket[PCMCIA_SOCKETS_NO];
-
-/*
- * Search this table to see if the windowsize is
- * supported...
- */
-
-#define M8XX_SIZES_NO 32
-
-static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = {
- 0x00000001, 0x00000002, 0x00000008, 0x00000004,
- 0x00000080, 0x00000040, 0x00000010, 0x00000020,
- 0x00008000, 0x00004000, 0x00001000, 0x00002000,
- 0x00000100, 0x00000200, 0x00000800, 0x00000400,
-
- 0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x01000000, 0x02000000, 0xffffffff, 0x04000000,
- 0x00010000, 0x00020000, 0x00080000, 0x00040000,
- 0x00800000, 0x00400000, 0x00100000, 0x00200000
-};
-
-/* ------------------------------------------------------------------------- */
-
-static irqreturn_t m8xx_interrupt(int irq, void *dev);
-
-#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
-
-/* FADS Boards from Motorola */
-
-#if defined(CONFIG_FADS)
-
-#define PCMCIA_BOARD_MSG "FADS"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- return 1;
- default:
- return 1;
- }
-
- /* first, turn off all power */
- out_be32((u32 *) BCSR1,
- in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK |
- BCSR1_PCCVPP_MASK));
-
- /* enable new powersettings */
- out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static void hardware_enable(int slot)
-{
- out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN);
-}
-
-static void hardware_disable(int slot)
-{
- out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN);
-}
-
-#endif
-
-/* MPC885ADS Boards */
-
-#if defined(CONFIG_MPC885ADS)
-
-#define PCMCIA_BOARD_MSG "MPC885ADS"
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static inline void hardware_enable(int slot)
-{
- m8xx_pcmcia_ops.hw_ctrl(slot, 1);
-}
-
-static inline void hardware_disable(int slot)
-{
- m8xx_pcmcia_ops.hw_ctrl(slot, 0);
-}
-
-static inline int voltage_set(int slot, int vcc, int vpp)
-{
- return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp);
-}
-
-#endif
-
-#if defined(CONFIG_PRxK)
-#include <asm/cpld.h>
-extern volatile fpga_pc_regs *fpga_pc;
-
-#define PCMCIA_BOARD_MSG "MPC855T"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u8 reg = 0;
- u8 regread;
- cpld_regs *ccpld = get_cpld();
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= PCMCIA_VCC_33;
- break;
- case 50:
- reg |= PCMCIA_VCC_50;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= PCMCIA_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= PCMCIA_VPP_12;
- else
- return 1;
- default:
- return 1;
- }
-
- reg = reg >> (slot << 2);
- regread = in_8(&ccpld->fpga_pc_ctl);
- if (reg !=
- (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
- /* enable new powersettings */
- regread =
- regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
- (slot << 2));
- out_8(&ccpld->fpga_pc_ctl, reg | regread);
- msleep(100);
- }
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_PRxK */
-
-static u32 pending_events[PCMCIA_SOCKETS_NO];
-static DEFINE_SPINLOCK(pending_event_lock);
-
-static irqreturn_t m8xx_interrupt(int irq, void *dev)
-{
- struct socket_info *s;
- struct event_table *e;
- unsigned int i, events, pscr, pipr, per;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
- pr_debug("m8xx_pcmcia: Interrupt!\n");
- /* get interrupt sources */
-
- pscr = in_be32(&pcmcia->pcmc_pscr);
- pipr = in_be32(&pcmcia->pcmc_pipr);
- per = in_be32(&pcmcia->pcmc_per);
-
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- s = &socket[i];
- e = &s->events[0];
- events = 0;
-
- while (e->regbit) {
- if (pscr & e->regbit)
- events |= e->eventbit;
-
- e++;
- }
-
- /*
- * report only if both card detect signals are the same
- * not too nice done,
- * we depend on that CD2 is the bit to the left of CD1...
- */
- if (events & SS_DETECT)
- if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
- (pipr & M8XX_PCMCIA_CD1(i))) {
- events &= ~SS_DETECT;
- }
-#ifdef PCMCIA_GLITCHY_CD
- /*
- * I've experienced CD problems with my ADS board.
- * We make an extra check to see if there was a
- * real change of Card detection.
- */
-
- if ((events & SS_DETECT) &&
- ((pipr &
- (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
- (s->state.Vcc | s->state.Vpp)) {
- events &= ~SS_DETECT;
- /*printk( "CD glitch workaround - CD = 0x%08x!\n",
- (pipr & (M8XX_PCMCIA_CD2(i)
- | M8XX_PCMCIA_CD1(i)))); */
- }
-#endif
-
- /* call the handler */
-
- pr_debug("m8xx_pcmcia: slot %u: events = 0x%02x, pscr = 0x%08x, "
- "pipr = 0x%08x\n", i, events, pscr, pipr);
-
- if (events) {
- spin_lock(&pending_event_lock);
- pending_events[i] |= events;
- spin_unlock(&pending_event_lock);
- /*
- * Turn off RDY_L bits in the PER mask on
- * CD interrupt receival.
- *
- * They can generate bad interrupts on the
- * ACS4,8,16,32. - marcelo
- */
- per &= ~M8XX_PCMCIA_RDY_L(0);
- per &= ~M8XX_PCMCIA_RDY_L(1);
-
- out_be32(&pcmcia->pcmc_per, per);
-
- if (events)
- pcmcia_parse_events(&socket[i].socket, events);
- }
- }
-
- /* clear the interrupt sources */
- out_be32(&pcmcia->pcmc_pscr, pscr);
-
- pr_debug("m8xx_pcmcia: Interrupt done.\n");
-
- return IRQ_HANDLED;
-}
-
-static u32 m8xx_get_graycode(u32 size)
-{
- u32 k;
-
- for (k = 0; k < M8XX_SIZES_NO; k++)
- if (m8xx_size_to_gray[k] == size)
- break;
-
- if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
- k = -1;
-
- return k;
-}
-
-static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
-{
- u32 reg, clocks, psst, psl, psht;
-
- if (!ns) {
-
- /*
- * We get called with IO maps setup to 0ns
- * if not specified by the user.
- * They should be 255ns.
- */
-
- if (is_io)
- ns = 255;
- else
- ns = 100; /* fast memory if 0 */
- }
-
- /*
- * In PSST, PSL, PSHT fields we tell the controller
- * timing parameters in CLKOUT clock cycles.
- * CLKOUT is the same as GCLK2_50.
- */
-
-/* how we want to adjust the timing - in percent */
-
-#define ADJ 180 /* 80 % longer accesstime - to be sure */
-
- clocks = ((bus_freq / 1000) * ns) / 1000;
- clocks = (clocks * ADJ) / (100 * 1000);
- if (clocks >= PCMCIA_BMT_LIMIT) {
- printk("Max access time limit reached\n");
- clocks = PCMCIA_BMT_LIMIT - 1;
- }
-
- psst = clocks / 7; /* setup time */
- psht = clocks / 7; /* hold time */
- psl = (clocks * 5) / 7; /* strobe length */
-
- psst += clocks - (psst + psht + psl);
-
- reg = psst << 12;
- reg |= psl << 7;
- reg |= psht << 16;
-
- return reg;
-}
-
-static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
-{
- int lsock = container_of(sock, struct socket_info, socket)->slot;
- struct socket_info *s = &socket[lsock];
- unsigned int pipr, reg;
- pcmconf8xx_t *pcmcia = s->pcmcia;
-
- pipr = in_be32(&pcmcia->pcmc_pipr);
-
- *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
- | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
- *value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
-
- if (s->state.flags & SS_IOCARD)
- *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0;
- else {
- *value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0;
- *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0;
- *value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0;
- }
-
- if (s->state.Vcc | s->state.Vpp)
- *value |= SS_POWERON;
-
- /*
- * Voltage detection:
- * This driver only supports 16-Bit pc-cards.
- * Cardbus is not handled here.
- *
- * To determine what voltage to use we must read the VS1 and VS2 pin.
- * Depending on what socket type is present,
- * different combinations mean different things.
- *
- * Card Key Socket Key VS1 VS2 Card Vcc for CIS parse
- *
- * 5V 5V, LV* NC NC 5V only 5V (if available)
- *
- * 5V 5V, LV* GND NC 5 or 3.3V as low as possible
- *
- * 5V 5V, LV* GND GND 5, 3.3, x.xV as low as possible
- *
- * LV* 5V - - shall not fit into socket
- *
- * LV* LV* GND NC 3.3V only 3.3V
- *
- * LV* LV* NC GND x.xV x.xV (if avail.)
- *
- * LV* LV* GND GND 3.3 or x.xV as low as possible
- *
- * *LV means Low Voltage
- *
- *
- * That gives us the following table:
- *
- * Socket VS1 VS2 Voltage
- *
- * 5V NC NC 5V
- * 5V NC GND none (should not be possible)
- * 5V GND NC >= 3.3V
- * 5V GND GND >= x.xV
- *
- * LV NC NC 5V (if available)
- * LV NC GND x.xV (if available)
- * LV GND NC 3.3V
- * LV GND GND >= x.xV
- *
- * So, how do I determine if I have a 5V or a LV
- * socket on my board? Look at the socket!
- *
- *
- * Socket with 5V key:
- * ++--------------------------------------------+
- * || |
- * || ||
- * || ||
- * | |
- * +---------------------------------------------+
- *
- * Socket with LV key:
- * ++--------------------------------------------+
- * || |
- * | ||
- * | ||
- * | |
- * +---------------------------------------------+
- *
- *
- * With other words - LV only cards does not fit
- * into the 5V socket!
- */
-
- /* read out VS1 and VS2 */
-
- reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
- >> M8XX_PCMCIA_VS_SHIFT(lsock);
-
- if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
- switch (reg) {
- case 1:
- *value |= SS_3VCARD;
- break; /* GND, NC - 3.3V only */
- case 2:
- *value |= SS_XVCARD;
- break; /* NC. GND - x.xV only */
- };
- }
-
- pr_debug("m8xx_pcmcia: GetStatus(%d) = %#2.2x\n", lsock, *value);
- return 0;
-}
-
-static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state)
-{
- int lsock = container_of(sock, struct socket_info, socket)->slot;
- struct socket_info *s = &socket[lsock];
- struct event_table *e;
- unsigned int reg;
- unsigned long flags;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
- pr_debug("m8xx_pcmcia: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
- state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
-
- /* First, set voltage - bail out if invalid */
- if (voltage_set(lsock, state->Vcc, state->Vpp))
- return -EINVAL;
-
- /* Take care of reset... */
- if (state->flags & SS_RESET)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
- else
- out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
-
- /* ... and output enable. */
-
- /* The CxOE signal is connected to a 74541 on the ADS.
- I guess most other boards used the ADS as a reference.
- I tried to control the CxOE signal with SS_OUTPUT_ENA,
- but the reset signal seems connected via the 541.
- If the CxOE is left high are some signals tristated and
- no pullups are present -> the cards act weird.
- So right now the buffers are enabled if the power is on. */
-
- if (state->Vcc || state->Vpp)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
- else
- out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
-
- /*
- * We'd better turn off interrupts before
- * we mess with the events-table..
- */
-
- spin_lock_irqsave(&events_lock, flags);
-
- /*
- * Play around with the interrupt mask to be able to
- * give the events the generic pcmcia driver wants us to.
- */
-
- e = &s->events[0];
- reg = 0;
-
- if (state->csc_mask & SS_DETECT) {
- e->eventbit = SS_DETECT;
- reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
- | M8XX_PCMCIA_CD1(lsock));
- e++;
- }
- if (state->flags & SS_IOCARD) {
- /*
- * I/O card
- */
- if (state->csc_mask & SS_STSCHG) {
- e->eventbit = SS_STSCHG;
- reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
- e++;
- }
- /*
- * If io_irq is non-zero we should enable irq.
- */
- if (state->io_irq) {
- out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) |
- mk_int_int_mask(s->hwirq) << 24);
- /*
- * Strange thing here:
- * The manual does not tell us which interrupt
- * the sources generate.
- * Anyhow, I found out that RDY_L generates IREQLVL.
- *
- * We use level triggerd interrupts, and they don't
- * have to be cleared in PSCR in the interrupt handler.
- */
- reg |= M8XX_PCMCIA_RDY_L(lsock);
- } else
- out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
- } else {
- /*
- * Memory card
- */
- if (state->csc_mask & SS_BATDEAD) {
- e->eventbit = SS_BATDEAD;
- reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
- e++;
- }
- if (state->csc_mask & SS_BATWARN) {
- e->eventbit = SS_BATWARN;
- reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
- e++;
- }
- /* What should I trigger on - low/high,raise,fall? */
- if (state->csc_mask & SS_READY) {
- e->eventbit = SS_READY;
- reg |= e->regbit = 0; //??
- e++;
- }
- }
-
- e->regbit = 0; /* terminate list */
-
- /*
- * Clear the status changed .
- * Port A and Port B share the same port.
- * Writing ones will clear the bits.
- */
-
- out_be32(&pcmcia->pcmc_pscr, reg);
-
- /*
- * Write the mask.
- * Port A and Port B share the same port.
- * Need for read-modify-write.
- * Ones will enable the interrupt.
- */
-
- reg |=
- in_be32(&pcmcia->
- pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
- out_be32(&pcmcia->pcmc_per, reg);
-
- spin_unlock_irqrestore(&events_lock, flags);
-
- /* copy the struct and modify the copy */
-
- s->state = *state;
-
- return 0;
-}
-
-static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
-{
- int lsock = container_of(sock, struct socket_info, socket)->slot;
-
- struct socket_info *s = &socket[lsock];
- struct pcmcia_win *w;
- unsigned int reg, winnr;
- pcmconf8xx_t *pcmcia = s->pcmcia;
-
-#define M8XX_SIZE (io->stop - io->start + 1)
-#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
-
- pr_debug("m8xx_pcmcia: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
- io->speed, (unsigned long long)io->start,
- (unsigned long long)io->stop);
-
- if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
- || (io->stop > 0xffff) || (io->stop < io->start))
- return -EINVAL;
-
- if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
- return -EINVAL;
-
- if (io->flags & MAP_ACTIVE) {
-
- pr_debug("m8xx_pcmcia: io->flags & MAP_ACTIVE\n");
-
- winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
-
- /* setup registers */
-
- w = (void *)&pcmcia->pcmc_pbr0;
- w += winnr;
-
- out_be32(&w->or, 0); /* turn off window first */
- out_be32(&w->br, M8XX_BASE);
-
- reg <<= 27;
- reg |= M8XX_PCMCIA_POR_IO | (lsock << 2);
-
- reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
-
- if (io->flags & MAP_WRPROT)
- reg |= M8XX_PCMCIA_POR_WRPROT;
-
- /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */
- if (io->flags & MAP_16BIT)
- reg |= M8XX_PCMCIA_POR_16BIT;
-
- if (io->flags & MAP_ACTIVE)
- reg |= M8XX_PCMCIA_POR_VALID;
-
- out_be32(&w->or, reg);
-
- pr_debug("m8xx_pcmcia: Socket %u: Mapped io window %u at "
- "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
- } else {
- /* shutdown IO window */
- winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
-
- /* setup registers */
-
- w = (void *)&pcmcia->pcmc_pbr0;
- w += winnr;
-
- out_be32(&w->or, 0); /* turn off window */
- out_be32(&w->br, 0); /* turn off base address */
-
- pr_debug("m8xx_pcmcia: Socket %u: Unmapped io window %u at "
- "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
- }
-
- /* copy the struct and modify the copy */
- s->io_win[io->map] = *io;
- s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
- pr_debug("m8xx_pcmcia: SetIOMap exit\n");
-
- return 0;
-}
-
-static int m8xx_set_mem_map(struct pcmcia_socket *sock,
- struct pccard_mem_map *mem)
-{
- int lsock = container_of(sock, struct socket_info, socket)->slot;
- struct socket_info *s = &socket[lsock];
- struct pcmcia_win *w;
- struct pccard_mem_map *old;
- unsigned int reg, winnr;
- pcmconf8xx_t *pcmcia = s->pcmcia;
-
- pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, (unsigned long long)mem->static_start,
- mem->card_start);
-
- if ((mem->map >= PCMCIA_MEM_WIN_NO)
-// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
- || (mem->card_start >= 0x04000000)
- || (mem->static_start & 0xfff) /* 4KByte resolution */
- ||(mem->card_start & 0xfff))
- return -EINVAL;
-
- if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
- printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
- return -EINVAL;
- }
- reg <<= 27;
-
- winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map;
-
- /* Setup the window in the pcmcia controller */
-
- w = (void *)&pcmcia->pcmc_pbr0;
- w += winnr;
-
- reg |= lsock << 2;
-
- reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
-
- if (mem->flags & MAP_ATTRIB)
- reg |= M8XX_PCMCIA_POR_ATTRMEM;
-
- if (mem->flags & MAP_WRPROT)
- reg |= M8XX_PCMCIA_POR_WRPROT;
-
- if (mem->flags & MAP_16BIT)
- reg |= M8XX_PCMCIA_POR_16BIT;
-
- if (mem->flags & MAP_ACTIVE)
- reg |= M8XX_PCMCIA_POR_VALID;
-
- out_be32(&w->or, reg);
-
- pr_debug("m8xx_pcmcia: Socket %u: Mapped memory window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
-
- if (mem->flags & MAP_ACTIVE) {
- /* get the new base address */
- mem->static_start = PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE * winnr)
- + mem->card_start;
- }
-
- pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, (unsigned long long)mem->static_start,
- mem->card_start);
-
- /* copy the struct and modify the copy */
-
- old = &s->mem_win[mem->map];
-
- *old = *mem;
- old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
-
- return 0;
-}
-
-static int m8xx_sock_init(struct pcmcia_socket *sock)
-{
- int i;
- pccard_io_map io = { 0, 0, 0, 0, 1 };
- pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
-
- pr_debug("m8xx_pcmcia: sock_init(%d)\n", s);
-
- m8xx_set_socket(sock, &dead_socket);
- for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
- io.map = i;
- m8xx_set_io_map(sock, &io);
- }
- for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) {
- mem.map = i;
- m8xx_set_mem_map(sock, &mem);
- }
-
- return 0;
-
-}
-
-static int m8xx_sock_suspend(struct pcmcia_socket *sock)
-{
- return m8xx_set_socket(sock, &dead_socket);
-}
-
-static struct pccard_operations m8xx_services = {
- .init = m8xx_sock_init,
- .suspend = m8xx_sock_suspend,
- .get_status = m8xx_get_status,
- .set_socket = m8xx_set_socket,
- .set_io_map = m8xx_set_io_map,
- .set_mem_map = m8xx_set_mem_map,
-};
-
-static int __init m8xx_probe(struct platform_device *ofdev)
-{
- struct pcmcia_win *w;
- unsigned int i, m, hwirq;
- pcmconf8xx_t *pcmcia;
- int status;
- struct device_node *np = ofdev->dev.of_node;
-
- pcmcia_info("%s\n", version);
-
- pcmcia = of_iomap(np, 0);
- if (pcmcia == NULL)
- return -EINVAL;
-
- pcmcia_schlvl = irq_of_parse_and_map(np, 0);
- hwirq = irq_map[pcmcia_schlvl].hwirq;
- if (pcmcia_schlvl < 0) {
- iounmap(pcmcia);
- return -EINVAL;
- }
-
- m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
- m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
-
- pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
- " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
-
- /* Configure Status change interrupt */
-
- if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
- driver_name, socket)) {
- pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
- pcmcia_schlvl);
- iounmap(pcmcia);
- return -1;
- }
-
- w = (void *)&pcmcia->pcmc_pbr0;
-
- out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
- clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-
- /* connect interrupt and disable CxOE */
-
- out_be32(M8XX_PGCRX(0),
- M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
- out_be32(M8XX_PGCRX(1),
- M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
-
- /* initialize the fixed memory windows */
-
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE
- * (m + i * PCMCIA_MEM_WIN_NO)));
-
- out_be32(&w->or, 0); /* set to not valid */
-
- w++;
- }
- }
-
- /* turn off voltage */
- voltage_set(0, 0, 0);
- voltage_set(1, 0, 0);
-
- /* Enable external hardware */
- hardware_enable(0);
- hardware_enable(1);
-
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- socket[i].slot = i;
- socket[i].socket.owner = THIS_MODULE;
- socket[i].socket.features =
- SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
- socket[i].socket.irq_mask = 0x000;
- socket[i].socket.map_size = 0x1000;
- socket[i].socket.io_offset = 0;
- socket[i].socket.pci_irq = pcmcia_schlvl;
- socket[i].socket.ops = &m8xx_services;
- socket[i].socket.resource_ops = &pccard_iodyn_ops;
- socket[i].socket.cb_dev = NULL;
- socket[i].socket.dev.parent = &ofdev->dev;
- socket[i].pcmcia = pcmcia;
- socket[i].bus_freq = ppc_proc_freq;
- socket[i].hwirq = hwirq;
-
- }
-
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- status = pcmcia_register_socket(&socket[i].socket);
- if (status < 0)
- pcmcia_error("Socket register failed\n");
- }
-
- return 0;
-}
-
-static int m8xx_remove(struct platform_device *ofdev)
-{
- u32 m, i;
- struct pcmcia_win *w;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- w = (void *)&pcmcia->pcmc_pbr0;
-
- out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
- out_be32(&pcmcia->pcmc_per,
- in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
-
- /* turn off interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
-
- /* turn off memory windows */
- for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
- w++;
- }
-
- /* turn off voltage */
- voltage_set(i, 0, 0);
-
- /* disable external hardware */
- hardware_disable(i);
- }
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
- pcmcia_unregister_socket(&socket[i].socket);
- iounmap(pcmcia);
-
- free_irq(pcmcia_schlvl, NULL);
-
- return 0;
-}
-
-static const struct of_device_id m8xx_pcmcia_match[] = {
- {
- .type = "pcmcia",
- .compatible = "fsl,pq-pcmcia",
- },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
-
-static struct platform_driver m8xx_pcmcia_driver = {
- .driver = {
- .name = driver_name,
- .owner = THIS_MODULE,
- .of_match_table = m8xx_pcmcia_match,
- },
- .probe = m8xx_probe,
- .remove = m8xx_remove,
-};
-
-module_platform_driver(m8xx_pcmcia_driver);
--
1.9.1
More information about the Linuxppc-dev
mailing list