[RFC PATCH 0/7] mmc: sdhci: adding support for a new Fujitsu sdhci IP

[Vincent Yang]

Hi,
We are adding support for a new Fujitsu sdhci IP.

These patches are against v3.16-rc1 mainline since nothing in
mmc-next at this moment.

These patches are tested on 3.16-rc1 integration tree.

We welcome any comment and advice about how to make any
improvements or better align them with upstream.

Thanks a lot!


Best regards,
Vincent Yang


Vincent Yang (7):
  mmc: sdhci: add quirk for broken 3.0V support
  mmc: sdhci: add quirk for voltage switch callback
  mmc: sdhci: add quirk for tuning work around
  mmc: sdhci: add quirk for single block transactions
  mmc: sdhci: host: add new f_sdh30
  mmc: core: hold SD Clock before CMD11 during Signal Voltage Switch
    Procedure
  mmc: core: add manual resume capability

 .../devicetree/bindings/mmc/sdhci-fujitsu.txt      |  25 ++
 drivers/mmc/core/core.c                            |   8 +-
 drivers/mmc/core/sd.c                              |   4 +
 drivers/mmc/host/Kconfig                           |   7 +
 drivers/mmc/host/Makefile                          |   1 +
 drivers/mmc/host/sdhci.c                           |  18 +-
 drivers/mmc/host/sdhci.h                           |   1 +
 drivers/mmc/host/sdhci_f_sdh30.c                   | 429 +++++++++++++++++++++
 drivers/mmc/host/sdhci_f_sdh30.h                   |  40 ++
 include/linux/mmc/host.h                           |  14 +
 include/linux/mmc/sdhci.h                          |   8 +
 11 files changed, 550 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
 create mode 100644 drivers/mmc/host/sdhci_f_sdh30.c
 create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h

-- 
1.9.0