Kernel 3.15: Boot problems with a PA6T board

[Christian Zigotzky]

Am 18.06.14 10:57, schrieb Christian Zigotzky:
> Am 18.06.14 08:51, schrieb Michael Ellerman:
>> On Tue, 2014-06-10 at 15:20 +0200, Christian Zigotzky wrote:
>>> Hi All,
>>>
>>> Could you help me to remove the changes of the PCI code, please? Or
>>> which patches shall I remove to get the old PCI code?
>> Hi Christian,
>>
>> Thanks for doing the bisect. It wasn't clear why that change was 
>> causing your
>> issue, so I guess we're a bit stuck.
>>
>> Olof (on CC), was going to try and look at it when he got some spare 
>> time.
>> Please keep him on CC.
>>
>> cheers
>>
>>
>>
> Hi Michael,
>
> Thank you for your answer. Adrian told me the reason about this issue.
>
> Quote Adrian:
>
> As I recall, PCI resource allocation on Nemo was always a little 
> strange due to using an AMD south bridge together with the PA6T north 
> bridge. The south bridge does not behave as a standard PCIe device, 
> but instead presents itself as multiple devices on the PCIe root bus. 
> This is not compliant with the PCIe specification. We modified the 
> core powerpc PCI code so that Nemo could boot, but the changes to PCI 
> code in 3.15 have broken the old workaround. I don't understand the 
> PCI changes in 3.15 enough to comment further at this point.
>
> Regards,
> Adrian
>
> Quote end
>
> Cheers,
>
> Christian
But my opinion is, that's normal for the SB600 south bridge to presents 
itself as multiple devices on the PCIe bus on x86 PCs. I see a lot of 
PCs with SB600 south bridge on the internet. And the Linux kernel works 
with this south bridge. Or is it a powerpc issue?

- Christian