[PATCH] powerpc: Remove platforms/wsp and associated pieces
Michael Ellerman
mpe at ellerman.id.au
Mon Jun 2 11:20:46 EST 2014
__attribute__ ((unused))
WSP is the last user of CONFIG_PPC_A2, so we remove that as well.
Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
---
arch/powerpc/Kconfig.debug | 5 -
arch/powerpc/configs/chroma_defconfig | 307 ---------
arch/powerpc/include/asm/mmu-book3e.h | 4 -
arch/powerpc/include/asm/reg_a2.h | 9 -
arch/powerpc/include/asm/wsp.h | 14 -
arch/powerpc/kernel/Makefile | 1 -
arch/powerpc/kernel/cpu_setup_a2.S | 120 ----
arch/powerpc/kernel/cputable.c | 38 --
arch/powerpc/kernel/exceptions-64e.S | 16 -
arch/powerpc/kernel/udbg.c | 2 -
arch/powerpc/kernel/udbg_16550.c | 11 -
arch/powerpc/platforms/Kconfig | 1 -
arch/powerpc/platforms/Kconfig.cputype | 6 +-
arch/powerpc/platforms/Makefile | 1 -
arch/powerpc/platforms/wsp/Kconfig | 30 -
arch/powerpc/platforms/wsp/Makefile | 10 -
arch/powerpc/platforms/wsp/chroma.c | 56 --
arch/powerpc/platforms/wsp/h8.c | 135 ----
arch/powerpc/platforms/wsp/ics.c | 762 ---------------------
arch/powerpc/platforms/wsp/ics.h | 25 -
arch/powerpc/platforms/wsp/msi.c | 102 ---
arch/powerpc/platforms/wsp/msi.h | 19 -
arch/powerpc/platforms/wsp/opb_pic.c | 321 ---------
arch/powerpc/platforms/wsp/psr2.c | 67 --
arch/powerpc/platforms/wsp/scom_smp.c | 434 ------------
arch/powerpc/platforms/wsp/scom_wsp.c | 82 ---
arch/powerpc/platforms/wsp/setup.c | 36 -
arch/powerpc/platforms/wsp/smp.c | 88 ---
arch/powerpc/platforms/wsp/wsp.c | 117 ----
arch/powerpc/platforms/wsp/wsp.h | 29 -
arch/powerpc/platforms/wsp/wsp_pci.c | 1134 --------------------------------
arch/powerpc/platforms/wsp/wsp_pci.h | 268 --------
32 files changed, 1 insertion(+), 4249 deletions(-)
delete mode 100644 arch/powerpc/configs/chroma_defconfig
delete mode 100644 arch/powerpc/include/asm/wsp.h
delete mode 100644 arch/powerpc/kernel/cpu_setup_a2.S
delete mode 100644 arch/powerpc/platforms/wsp/Kconfig
delete mode 100644 arch/powerpc/platforms/wsp/Makefile
delete mode 100644 arch/powerpc/platforms/wsp/chroma.c
delete mode 100644 arch/powerpc/platforms/wsp/h8.c
delete mode 100644 arch/powerpc/platforms/wsp/ics.c
delete mode 100644 arch/powerpc/platforms/wsp/ics.h
delete mode 100644 arch/powerpc/platforms/wsp/msi.c
delete mode 100644 arch/powerpc/platforms/wsp/msi.h
delete mode 100644 arch/powerpc/platforms/wsp/opb_pic.c
delete mode 100644 arch/powerpc/platforms/wsp/psr2.c
delete mode 100644 arch/powerpc/platforms/wsp/scom_smp.c
delete mode 100644 arch/powerpc/platforms/wsp/scom_wsp.c
delete mode 100644 arch/powerpc/platforms/wsp/setup.c
delete mode 100644 arch/powerpc/platforms/wsp/smp.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp.h
delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.h
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 21c9f30..790352f 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -235,11 +235,6 @@ config PPC_EARLY_DEBUG_USBGECKO
Select this to enable early debugging for Nintendo GameCube/Wii
consoles via an external USB Gecko adapter.
-config PPC_EARLY_DEBUG_WSP
- bool "Early debugging via WSP's internal UART"
- depends on PPC_WSP
- select PPC_UDBG_16550
-
config PPC_EARLY_DEBUG_PS3GELIC
bool "Early debugging through the PS3 Ethernet port"
depends on PPC_PS3
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
deleted file mode 100644
index 4f35fc4..0000000
--- a/arch/powerpc/configs/chroma_defconfig
+++ /dev/null
@@ -1,307 +0,0 @@
-CONFIG_PPC64=y
-CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=256
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEMCG_SWAP=y
-CONFIG_NAMESPACES=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_SCOM_DEBUGFS=y
-CONFIG_PPC_A2_DD2=y
-CONFIG_KVM_GUEST=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_PPC_64K_PAGES=y
-CONFIG_SCHED_SMT=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE=""
-# CONFIG_SECCOMP is not set
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NET_TCPPROBE=y
-# CONFIG_WIRELESS is not set
-CONFIG_NET_9P=y
-CONFIG_NET_9P_DEBUG=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_MISC_DEVICES=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_SIL680=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_E1000E=y
-CONFIG_TIGON3=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1511=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_PPC_EMULATED_STATS=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 901dac6..d0918e0 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -223,10 +223,6 @@ typedef struct {
unsigned int id;
unsigned int active;
unsigned long vdso_base;
-#ifdef CONFIG_PPC_ICSWX
- struct spinlock *cop_lockp; /* guard cop related stuff */
- unsigned long acop; /* mask of enabled coprocessor types */
-#endif /* CONFIG_PPC_ICSWX */
#ifdef CONFIG_PPC_MM_SLICES
u64 low_slices_psize; /* SLB page size encodings */
u64 high_slices_psize; /* 4 bits per slice for now */
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
index 3d52a11..3ba9c6f 100644
--- a/arch/powerpc/include/asm/reg_a2.h
+++ b/arch/powerpc/include/asm/reg_a2.h
@@ -110,15 +110,6 @@
#define TLB1_UR ASM_CONST(0x0000000000000002)
#define TLB1_SR ASM_CONST(0x0000000000000001)
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-#define WSP_UART_PHYS 0xffc000c000
-/* This needs to be careful chosen to hit a !0 congruence class
- * in the TLB since we bolt it in way 3, which is already occupied
- * by our linear mapping primary bolted entry in CC 0.
- */
-#define WSP_UART_VIRT 0xf000000000001000
-#endif
-
/* A2 erativax attributes definitions */
#define ERATIVAX_RS_IS_ALL 0x000
#define ERATIVAX_RS_IS_TID 0x040
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
deleted file mode 100644
index c7dc830..0000000
--- a/arch/powerpc/include/asm/wsp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_POWERPC_WSP_H
-#define __ASM_POWERPC_WSP_H
-
-extern int wsp_get_chip_id(struct device_node *dn);
-
-#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index fcc9a89..7e5f89b 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
-obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
deleted file mode 100644
index 61f079e..0000000
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * A2 specific assembly support code
- *
- * Copyright 2009 Ben Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-offsets.h>
-#include <asm/ppc_asm.h>
-#include <asm/ppc-opcode.h>
-#include <asm/processor.h>
-#include <asm/reg_a2.h>
-#include <asm/reg.h>
-#include <asm/thread_info.h>
-
-/*
- * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
- * This also prevents external LPID accesses but that isn't a problem when not a
- * guest. Under PV, this setting will be ignored and MMUCR will return the right
- * number of PID bits we can use.
- */
-#define MMUCR1_EXTEND_PID \
- (MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
- MMUCR1_DTTID | MMUCR1_DCCD)
-
-/*
- * Use extended PIDs if enabled.
- * Don't clear the ERATs on context sync events and enable I & D LRU.
- * Enable ERAT back invalidate when tlbwe overwrites an entry.
- */
-#define INITIAL_MMUCR1 \
- (MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
- MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
-
-_GLOBAL(__setup_cpu_a2)
- /* Some of these are actually thread local and some are
- * core local but doing it always won't hurt
- */
-
-#ifdef CONFIG_PPC_ICSWX
- /* Make sure ACOP starts out as zero */
- li r3,0
- mtspr SPRN_ACOP,r3
-
- /* Skip the following if we are in Guest mode */
- mfmsr r3
- andis. r0,r3,MSR_GS at h
- bne _icswx_skip_guest
-
- /* Enable icswx instruction */
- mfspr r3,SPRN_A2_CCR2
- ori r3,r3,A2_CCR2_ENABLE_ICSWX
- mtspr SPRN_A2_CCR2,r3
-
- /* Unmask all CTs in HACOP */
- li r3,-1
- mtspr SPRN_HACOP,r3
-_icswx_skip_guest:
-#endif /* CONFIG_PPC_ICSWX */
-
- /* Enable doorbell */
- mfspr r3,SPRN_A2_CCR2
- oris r3,r3,A2_CCR2_ENABLE_PC at h
- mtspr SPRN_A2_CCR2,r3
- isync
-
- /* Setup CCR0 to disable power saving for now as it's busted
- * in the current implementations. Setup CCR1 to wake on
- * interrupts normally (we write the default value but who
- * knows what FW may have clobbered...)
- */
- li r3,0
- mtspr SPRN_A2_CCR0, r3
- LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
- mtspr SPRN_A2_CCR1, r3
-
- /* Initialise MMUCR1 */
- lis r3,INITIAL_MMUCR1 at h
- ori r3,r3,INITIAL_MMUCR1 at l
- mtspr SPRN_MMUCR1,r3
-
- /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
- LOAD_REG_IMMEDIATE(r3, 0x000a7531)
- mtspr SPRN_MMUCR2,r3
-
- /* Set MMUCR3 to write all thids bit to the TLB */
- LOAD_REG_IMMEDIATE(r3, 0x0000000f)
- mtspr SPRN_MMUCR3,r3
-
- /* Don't do ERAT stuff if running guest mode */
- mfmsr r3
- andis. r0,r3,MSR_GS at h
- bne 1f
-
- /* Now set the I-ERAT watermark to 15 */
- lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
- mtspr SPRN_MMUCR0, r4
- li r4,A2_IERAT_SIZE-1
- PPC_ERATWE(R4,R4,3)
-
- /* Now set the D-ERAT watermark to 31 */
- lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
- mtspr SPRN_MMUCR0, r4
- li r4,A2_DERAT_SIZE-1
- PPC_ERATWE(R4,R4,3)
-
- /* And invalidate the beast just in case. That won't get rid of
- * a bolted entry though it will be in LRU and so will go away eventually
- * but let's not bother for now
- */
- PPC_ERATILX(0,0,R0)
-1:
- blr
-
-_GLOBAL(__restore_cpu_a2)
- b __setup_cpu_a2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index c1faade..ba76730 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2148,44 +2148,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
}
#endif /* CONFIG_PPC32 */
#endif /* CONFIG_E500 */
-
-#ifdef CONFIG_PPC_A2
- { /* Standard A2 (>= DD2) + FPU core */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x00480000,
- .cpu_name = "A2 (>= DD2)",
- .cpu_features = CPU_FTRS_A2,
- .cpu_user_features = COMMON_USER_PPC64,
- .mmu_features = MMU_FTRS_A2,
- .icache_bsize = 64,
- .dcache_bsize = 64,
- .num_pmcs = 0,
- .cpu_setup = __setup_cpu_a2,
- .cpu_restore = __restore_cpu_a2,
- .machine_check = machine_check_generic,
- .platform = "ppca2",
- },
- { /* This is a default entry to get going, to be replaced by
- * a real one at some stage
- */
-#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
- CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
- .pvr_mask = 0x00000000,
- .pvr_value = 0x00000000,
- .cpu_name = "Book3E",
- .cpu_features = CPU_FTRS_BASE_BOOK3E,
- .cpu_user_features = COMMON_USER_PPC64,
- .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
- MMU_FTR_USE_TLBIVAX_BCAST |
- MMU_FTR_LOCK_BCAST_INVAL,
- .icache_bsize = 64,
- .dcache_bsize = 64,
- .num_pmcs = 0,
- .machine_check = machine_check_generic,
- .platform = "power6",
- },
-#endif /* CONFIG_PPC_A2 */
};
static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c1bee3c..720cfd9 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1467,22 +1467,6 @@ a2_tlbinit_after_linear_map:
.globl a2_tlbinit_after_iprot_flush
a2_tlbinit_after_iprot_flush:
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
- /* Now establish early debug mappings if applicable */
- /* Restore the MAS0 we used for linear mapping load */
- mtspr SPRN_MAS0,r11
-
- lis r3,(MAS1_VALID | MAS1_IPROT)@h
- ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
- mtspr SPRN_MAS1,r3
- LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
- mtspr SPRN_MAS2,r3
- LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
- mtspr SPRN_MAS7_MAS3,r3
- /* re-use the MAS8 value from the linear mapping */
- tlbwe
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
-
PPC_TLBILX(0,0,R0)
sync
isync
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index a158375..b7aa072 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -62,8 +62,6 @@ void __init udbg_early_init(void)
udbg_init_cpm();
#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
udbg_init_usbgecko();
-#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
- udbg_init_wsp();
#elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS)
/* In memory console */
udbg_init_memcons();
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 75702e2..6e7c492 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -296,14 +296,3 @@ void __init udbg_init_40x_realmode(void)
}
#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
-
-
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-
-void __init udbg_init_wsp(void)
-{
- udbg_uart_init_mmio((void *)WSP_UART_VIRT, 1);
- udbg_uart_setup(57600, 50000000);
-}
-
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index bf9c6d4..391b3f6 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -19,7 +19,6 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
source "arch/powerpc/platforms/44x/Kconfig"
source "arch/powerpc/platforms/40x/Kconfig"
source "arch/powerpc/platforms/amigaone/Kconfig"
-source "arch/powerpc/platforms/wsp/Kconfig"
config KVM_GUEST
bool "KVM Guest support"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d9e2b19..eb7eb73 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -148,10 +148,6 @@ config POWER4
depends on PPC64 && PPC_BOOK3S
def_bool y
-config PPC_A2
- bool
- depends on PPC_BOOK3E_64
-
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
depends on PPC64 && PPC_BOOK3S
@@ -280,7 +276,7 @@ config VSX
config PPC_ICSWX
bool "Support for PowerPC icswx coprocessor instruction"
- depends on POWER4 || PPC_A2
+ depends on POWER4
default n
---help---
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 879b4a4..469ef17 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,4 +22,3 @@ obj-$(CONFIG_PPC_CELL) += cell/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
obj-$(CONFIG_AMIGAONE) += amigaone/
-obj-$(CONFIG_PPC_WSP) += wsp/
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
deleted file mode 100644
index 422a175..0000000
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-config PPC_WSP
- bool
- select PPC_A2
- select GENERIC_TBSYNC
- select PPC_ICSWX
- select PPC_SCOM
- select PPC_XICS
- select PPC_ICP_NATIVE
- select PCI
- select PPC_IO_WORKAROUNDS if PCI
- select PPC_INDIRECT_PIO if PCI
- default n
-
-menu "WSP platform selection"
- depends on PPC_BOOK3E_64
-
-config PPC_PSR2
- bool "PowerEN System Reference Platform 2"
- select EPAPR_BOOT
- select PPC_WSP
- default y
-
-config PPC_CHROMA
- bool "PowerEN PCIe Chroma Card"
- select EPAPR_BOOT
- select PPC_WSP
- select OF_DYNAMIC
- default y
-
-endmenu
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
deleted file mode 100644
index 162fc60..0000000
--- a/arch/powerpc/platforms/wsp/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-ccflags-y += $(NO_MINIMAL_TOC)
-
-obj-y += setup.o ics.o wsp.o
-obj-$(CONFIG_PPC_PSR2) += psr2.o
-obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o
-obj-$(CONFIG_PPC_WSP) += opb_pic.o
-obj-$(CONFIG_PPC_WSP) += scom_wsp.o
-obj-$(CONFIG_SMP) += smp.o scom_smp.o
-obj-$(CONFIG_PCI) += wsp_pci.o
-obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
deleted file mode 100644
index aaa46b3..0000000
--- a/arch/powerpc/platforms/wsp/chroma.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/of_fdt.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-void __init chroma_setup_arch(void)
-{
- wsp_setup_arch();
- wsp_setup_h8();
-
-}
-
-static int __init chroma_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
- return 0;
-
- return 1;
-}
-
-define_machine(chroma_md) {
- .name = "Chroma PCIe",
- .probe = chroma_probe,
- .setup_arch = chroma_setup_arch,
- .restart = wsp_h8_restart,
- .power_off = wsp_h8_power_off,
- .halt = wsp_halt,
- .calibrate_decr = generic_calibrate_decr,
- .init_IRQ = wsp_setup_irq,
- .progress = udbg_progress,
- .power_save = book3e_idle,
-};
-
-machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
deleted file mode 100644
index a3c87f3..0000000
--- a/arch/powerpc/platforms/wsp/h8.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-
-#include "wsp.h"
-
-/*
- * The UART connection to the H8 is over ttyS1 which is just a 16550.
- * We assume that FW has it setup right and no one messes with it.
- */
-
-
-static u8 __iomem *h8;
-
-#define RBR 0 /* Receiver Buffer Register */
-#define THR 0 /* Transmitter Holding Register */
-#define LSR 5 /* Line Status Register */
-#define LSR_DR 0x01 /* LSR value for Data-Ready */
-#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */
-static void wsp_h8_putc(int c)
-{
- u8 lsr;
-
- do {
- lsr = readb(h8 + LSR);
- } while ((lsr & LSR_THRE) != LSR_THRE);
- writeb(c, h8 + THR);
-}
-
-static int wsp_h8_getc(void)
-{
- u8 lsr;
-
- do {
- lsr = readb(h8 + LSR);
- } while ((lsr & LSR_DR) != LSR_DR);
-
- return readb(h8 + RBR);
-}
-
-static void wsp_h8_puts(const char *s, int sz)
-{
- int i;
-
- for (i = 0; i < sz; i++) {
- wsp_h8_putc(s[i]);
-
- /* no flow control so wait for echo */
- wsp_h8_getc();
- }
- wsp_h8_putc('\r');
- wsp_h8_putc('\n');
-}
-
-static void wsp_h8_terminal_cmd(const char *cmd, int sz)
-{
- hard_irq_disable();
- wsp_h8_puts(cmd, sz);
- /* should never return, but just in case */
- for (;;)
- continue;
-}
-
-
-void wsp_h8_restart(char *cmd)
-{
- static const char restart[] = "warm-reset";
-
- (void)cmd;
- wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
-}
-
-void wsp_h8_power_off(void)
-{
- static const char off[] = "power-off";
-
- wsp_h8_terminal_cmd(off, sizeof(off) - 1);
-}
-
-static void __iomem *wsp_h8_getaddr(void)
-{
- struct device_node *aliases;
- struct device_node *uart;
- struct property *path;
- void __iomem *va = NULL;
-
- /*
- * there is nothing in the devtree to tell us which is mapped
- * to the H8, but se know it is the second serial port.
- */
-
- aliases = of_find_node_by_path("/aliases");
- if (aliases == NULL)
- return NULL;
-
- path = of_find_property(aliases, "serial1", NULL);
- if (path == NULL)
- goto out;
-
- uart = of_find_node_by_path(path->value);
- if (uart == NULL)
- goto out;
-
- va = of_iomap(uart, 0);
-
- /* remove it so no one messes with it */
- of_detach_node(uart);
- of_node_put(uart);
-
-out:
- of_node_put(aliases);
-
- return va;
-}
-
-void __init wsp_setup_h8(void)
-{
- h8 = wsp_h8_getaddr();
-
- /* Devtree change? lets hard map it anyway */
- if (h8 == NULL) {
- pr_warn("UART to H8 could not be found");
- h8 = ioremap(0xffc0008000ULL, 0x100);
- }
-}
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
deleted file mode 100644
index 9cd92e6..0000000
--- a/arch/powerpc/platforms/wsp/ics.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * Copyright 2008-2011 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/xics.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-
-/* WSP ICS */
-
-struct wsp_ics {
- struct ics ics;
- struct device_node *dn;
- void __iomem *regs;
- spinlock_t lock;
- unsigned long *bitmap;
- u32 chip_id;
- u32 lsi_base;
- u32 lsi_count;
- u64 hwirq_start;
- u64 count;
-#ifdef CONFIG_SMP
- int *hwirq_cpu_map;
-#endif
-};
-
-#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics)
-
-#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00)
-#define IODA_TBL_ADDR_REG(base) ((base) + 0x18)
-#define IODA_TBL_DATA_REG(base) ((base) + 0x20)
-#define XIVE_UPDATE_REG(base) ((base) + 0x28)
-#define ICS_INT_CAPS_REG(base) ((base) + 0x30)
-
-#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15))
-#define TBL_SELECT_XIST (1UL << 48)
-#define TBL_SELECT_XIVT (1UL << 49)
-
-#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */
-
-#define XIST_REQUIRED 0x8
-#define XIST_REJECTED 0x4
-#define XIST_PRESENTED 0x2
-#define XIST_PENDING 0x1
-
-#define XIVE_SERVER_SHIFT 42
-#define XIVE_SERVER_MASK 0xFFFFULL
-#define XIVE_PRIORITY_MASK 0xFFULL
-#define XIVE_PRIORITY_SHIFT 32
-#define XIVE_WRITE_ENABLE (1ULL << 63)
-
-/*
- * The docs refer to a 6 bit field called ChipID, which consists of a
- * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
- * so we ignore it, and every where we use "chip id" in this code we
- * mean the NodeID.
- */
-#define WSP_ICS_CHIP_SHIFT 17
-
-
-static struct wsp_ics *ics_list;
-static int num_ics;
-
-/* ICS Source controller accessors */
-
-static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
-{
- unsigned long flags;
- u64 xive;
-
- spin_lock_irqsave(&ics->lock, flags);
- out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
- xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
- spin_unlock_irqrestore(&ics->lock, flags);
-
- return xive;
-}
-
-static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
-{
- xive &= ~XIVE_ADDR_MASK;
- xive |= (irq & XIVE_ADDR_MASK);
- xive |= XIVE_WRITE_ENABLE;
-
- out_be64(XIVE_UPDATE_REG(ics->regs), xive);
-}
-
-static u64 xive_set_server(u64 xive, unsigned int server)
-{
- u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
-
- xive &= mask;
- xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
-
- return xive;
-}
-
-static u64 xive_set_priority(u64 xive, unsigned int priority)
-{
- u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
-
- xive &= mask;
- xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
-
- return xive;
-}
-
-
-#ifdef CONFIG_SMP
-/* Find logical CPUs within mask on a given chip and store result in ret */
-void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
-{
- int cpu, chip;
- struct device_node *cpu_dn, *dn;
- const u32 *prop;
-
- cpumask_clear(ret);
- for_each_cpu(cpu, mask) {
- cpu_dn = of_get_cpu_node(cpu, NULL);
- if (!cpu_dn)
- continue;
-
- prop = of_get_property(cpu_dn, "at-node", NULL);
- if (!prop) {
- of_node_put(cpu_dn);
- continue;
- }
-
- dn = of_find_node_by_phandle(*prop);
- of_node_put(cpu_dn);
-
- chip = wsp_get_chip_id(dn);
- if (chip == chip_id)
- cpumask_set_cpu(cpu, ret);
-
- of_node_put(dn);
- }
-}
-
-/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
- const cpumask_t *affinity)
-{
- cpumask_var_t avail, newmask;
- int ret = -ENOMEM, cpu, cpu_rover = 0, target;
- int index = hwirq - ics->hwirq_start;
- unsigned int nodeid;
-
- BUG_ON(index < 0 || index >= ics->count);
-
- if (!ics->hwirq_cpu_map)
- return -ENOMEM;
-
- if (!distribute_irqs) {
- ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
- return 0;
- }
-
- /* Allocate needed CPU masks */
- if (!alloc_cpumask_var(&avail, GFP_KERNEL))
- goto ret;
- if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
- goto freeavail;
-
- /* Find PBus attached to the source of this IRQ */
- nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
-
- /* Find CPUs that could handle this IRQ */
- if (affinity)
- cpumask_and(avail, cpu_online_mask, affinity);
- else
- cpumask_copy(avail, cpu_online_mask);
-
- /* Narrow selection down to logical CPUs on the same chip */
- cpus_on_chip(nodeid, avail, newmask);
-
- /* Ensure we haven't narrowed it down to 0 */
- if (unlikely(cpumask_empty(newmask))) {
- if (unlikely(cpumask_empty(avail))) {
- ret = -1;
- goto out;
- }
- cpumask_copy(newmask, avail);
- }
-
- /* Choose a CPU out of those we narrowed it down to in round robin */
- target = hwirq % cpumask_weight(newmask);
- for_each_cpu(cpu, newmask) {
- if (cpu_rover++ >= target) {
- ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
- ret = 0;
- goto out;
- }
- }
-
- /* Shouldn't happen */
- WARN_ON(1);
-
-out:
- free_cpumask_var(newmask);
-freeavail:
- free_cpumask_var(avail);
-ret:
- if (ret < 0) {
- ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
- pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
- hwirq, ics->hwirq_cpu_map[index]);
- }
- return ret;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics)
-{
- int i;
-
- ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
- if (!ics->hwirq_cpu_map) {
- pr_warning("Allocate hwirq_cpu_map failed, "
- "IRQ balancing disabled\n");
- return;
- }
-
- for (i=0; i < ics->count; i++)
- ics->hwirq_cpu_map[i] = xics_default_server;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
- int index = hwirq - ics->hwirq_start;
-
- BUG_ON(index < 0 || index >= ics->count);
-
- if (!ics->hwirq_cpu_map)
- return xics_default_server;
-
- return ics->hwirq_cpu_map[index];
-}
-#else /* !CONFIG_SMP */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
- const cpumask_t *affinity)
-{
- return 0;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
- return xics_default_server;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics) { }
-#endif
-
-static void wsp_chip_unmask_irq(struct irq_data *d)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics;
- int server;
- u64 xive;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return;
-
- ics = d->chip_data;
- if (WARN_ON(!ics))
- return;
-
- server = get_irq_server(ics, hw_irq);
-
- xive = wsp_ics_get_xive(ics, hw_irq);
- xive = xive_set_server(xive, server);
- xive = xive_set_priority(xive, DEFAULT_PRIORITY);
- wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static unsigned int wsp_chip_startup(struct irq_data *d)
-{
- /* unmask it */
- wsp_chip_unmask_irq(d);
- return 0;
-}
-
-static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
-{
- u64 xive;
-
- if (hw_irq == XICS_IPI)
- return;
-
- if (WARN_ON(!ics))
- return;
- xive = wsp_ics_get_xive(ics, hw_irq);
- xive = xive_set_server(xive, xics_default_server);
- xive = xive_set_priority(xive, LOWEST_PRIORITY);
- wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static void wsp_chip_mask_irq(struct irq_data *d)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics = d->chip_data;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return;
-
- wsp_mask_real_irq(hw_irq, ics);
-}
-
-static int wsp_chip_set_affinity(struct irq_data *d,
- const struct cpumask *cpumask, bool force)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics;
- int ret;
- u64 xive;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return -1;
-
- ics = d->chip_data;
- if (WARN_ON(!ics))
- return -1;
- xive = wsp_ics_get_xive(ics, hw_irq);
-
- /*
- * For the moment only implement delivery to all cpus or one cpu.
- * Get current irq_server for the given irq
- */
- ret = cache_hwirq_map(ics, hw_irq, cpumask);
- if (ret == -1) {
- char cpulist[128];
- cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
- pr_warning("%s: No online cpus in the mask %s for irq %d\n",
- __func__, cpulist, d->irq);
- return -1;
- } else if (ret == -ENOMEM) {
- pr_warning("%s: Out of memory\n", __func__);
- return -1;
- }
-
- xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
- wsp_ics_set_xive(ics, hw_irq, xive);
-
- return IRQ_SET_MASK_OK;
-}
-
-static struct irq_chip wsp_irq_chip = {
- .name = "WSP ICS",
- .irq_startup = wsp_chip_startup,
- .irq_mask = wsp_chip_mask_irq,
- .irq_unmask = wsp_chip_unmask_irq,
- .irq_set_affinity = wsp_chip_set_affinity
-};
-
-static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
-{
- /* All ICSs in the system implement a global irq number space,
- * so match against them all. */
- return of_device_is_compatible(dn, "ibm,ppc-xics");
-}
-
-static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
-{
- if (hwirq >= wsp_ics->hwirq_start &&
- hwirq < wsp_ics->hwirq_start + wsp_ics->count)
- return 1;
-
- return 0;
-}
-
-static int wsp_ics_map(struct ics *ics, unsigned int virq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
- unsigned int hw_irq = virq_to_hw(virq);
- unsigned long flags;
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return -ENOENT;
-
- irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
-
- irq_set_chip_data(virq, wsp_ics);
-
- spin_lock_irqsave(&wsp_ics->lock, flags);
- bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
- spin_unlock_irqrestore(&wsp_ics->lock, flags);
-
- return 0;
-}
-
-static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return;
-
- pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
- wsp_mask_real_irq(hw_irq, wsp_ics);
-}
-
-static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return -ENOENT;
-
- return get_irq_server(wsp_ics, hw_irq);
-}
-
-/* HW Number allocation API */
-
-static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
-{
- struct device_node *iparent;
- int i;
-
- iparent = of_irq_find_parent(dn);
- if (!iparent) {
- pr_err("wsp_ics: Failed to find interrupt parent!\n");
- return NULL;
- }
-
- for(i = 0; i < num_ics; i++) {
- if(ics_list[i].dn == iparent)
- break;
- }
-
- if (i >= num_ics) {
- pr_err("wsp_ics: Unable to find parent bitmap!\n");
- return NULL;
- }
-
- return &ics_list[i];
-}
-
-int wsp_ics_alloc_irq(struct device_node *dn, int num)
-{
- struct wsp_ics *ics;
- int order, offset;
-
- ics = wsp_ics_find_dn_ics(dn);
- if (!ics)
- return -ENODEV;
-
- /* Fast, but overly strict if num isn't a power of two */
- order = get_count_order(num);
-
- spin_lock_irq(&ics->lock);
- offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
- spin_unlock_irq(&ics->lock);
-
- if (offset < 0)
- return offset;
-
- return offset + ics->hwirq_start;
-}
-
-void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
-{
- struct wsp_ics *ics;
-
- ics = wsp_ics_find_dn_ics(dn);
- if (WARN_ON(!ics))
- return;
-
- spin_lock_irq(&ics->lock);
- bitmap_release_region(ics->bitmap, irq, 0);
- spin_unlock_irq(&ics->lock);
-}
-
-/* Initialisation */
-
-static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
- struct device_node *dn)
-{
- int len, i, j, size;
- u32 start, count;
- const u32 *p;
-
- size = BITS_TO_LONGS(ics->count) * sizeof(long);
- ics->bitmap = kzalloc(size, GFP_KERNEL);
- if (!ics->bitmap) {
- pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
- return -ENOMEM;
- }
-
- spin_lock_init(&ics->lock);
-
- p = of_get_property(dn, "available-ranges", &len);
- if (!p || !len) {
- /* FIXME this should be a WARN() once mambo is updated */
- pr_err("wsp_ics: No available-ranges defined for %s\n",
- dn->full_name);
- return 0;
- }
-
- if (len % (2 * sizeof(u32)) != 0) {
- /* FIXME this should be a WARN() once mambo is updated */
- pr_err("wsp_ics: Invalid available-ranges for %s\n",
- dn->full_name);
- return 0;
- }
-
- bitmap_fill(ics->bitmap, ics->count);
-
- for (i = 0; i < len / sizeof(u32); i += 2) {
- start = of_read_number(p + i, 1);
- count = of_read_number(p + i + 1, 1);
-
- pr_devel("%s: start: %d count: %d\n", __func__, start, count);
-
- if ((start + count) > (ics->hwirq_start + ics->count) ||
- start < ics->hwirq_start) {
- pr_err("wsp_ics: Invalid range! -> %d to %d\n",
- start, start + count);
- break;
- }
-
- for (j = 0; j < count; j++)
- bitmap_release_region(ics->bitmap,
- (start + j) - ics->hwirq_start, 0);
- }
-
- /* Ensure LSIs are not available for allocation */
- bitmap_allocate_region(ics->bitmap, ics->lsi_base,
- get_count_order(ics->lsi_count));
-
- return 0;
-}
-
-static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
-{
- u32 lsi_buid, msi_buid, msi_base, msi_count;
- void __iomem *regs;
- const u32 *p;
- int rc, len, i;
- u64 caps, buid;
-
- p = of_get_property(dn, "interrupt-ranges", &len);
- if (!p || len < (2 * sizeof(u32))) {
- pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
- dn->full_name);
- return -ENOENT;
- }
-
- if (len > (2 * sizeof(u32))) {
- pr_err("wsp_ics: Multiple ics ranges not supported.\n");
- return -EINVAL;
- }
-
- regs = of_iomap(dn, 0);
- if (!regs) {
- pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
- return -ENXIO;
- }
-
- ics->hwirq_start = of_read_number(p, 1);
- ics->count = of_read_number(p + 1, 1);
- ics->regs = regs;
-
- ics->chip_id = wsp_get_chip_id(dn);
- if (WARN_ON(ics->chip_id < 0))
- ics->chip_id = 0;
-
- /* Get some informations about the critter */
- caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
- buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
- ics->lsi_count = caps >> 56;
- msi_count = (caps >> 44) & 0x7ff;
-
- /* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
- * rest is mixed in the interrupt number. We store the whole
- * thing though
- */
- lsi_buid = (buid >> 48) & 0x1ff;
- ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
- msi_buid = (buid >> 37) & 0x7;
- msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
-
- pr_info("wsp_ics: Found %s\n", dn->full_name);
- pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n",
- ics->hwirq_start, ics->hwirq_start + ics->count - 1);
- pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n",
- ics->lsi_count, ics->lsi_base,
- ics->lsi_base + ics->lsi_count - 1);
- pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n",
- msi_count, msi_base,
- msi_base + msi_count - 1);
-
- /* Let's check the HW config is sane */
- if (ics->lsi_base < ics->hwirq_start ||
- (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
- pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
- if (msi_base < ics->hwirq_start ||
- (msi_base + msi_count) > (ics->hwirq_start + ics->count))
- pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
-
- /* We don't check for overlap between LSI and MSI, which will happen
- * if we use the same BUID, I'm not sure yet how legit that is.
- */
-
- rc = wsp_ics_bitmap_setup(ics, dn);
- if (rc) {
- iounmap(regs);
- return rc;
- }
-
- ics->dn = of_node_get(dn);
- alloc_irq_map(ics);
-
- for(i = 0; i < ics->count; i++)
- wsp_mask_real_irq(ics->hwirq_start + i, ics);
-
- ics->ics.map = wsp_ics_map;
- ics->ics.mask_unknown = wsp_ics_mask_unknown;
- ics->ics.get_server = wsp_ics_get_server;
- ics->ics.host_match = wsp_ics_host_match;
-
- xics_register_ics(&ics->ics);
-
- return 0;
-}
-
-static void __init wsp_ics_set_default_server(void)
-{
- struct device_node *np;
- u32 hwid;
-
- /* Find the server number for the boot cpu. */
- np = of_get_cpu_node(boot_cpuid, NULL);
- BUG_ON(!np);
-
- hwid = get_hard_smp_processor_id(boot_cpuid);
-
- pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
- xics_default_server = hwid;
-
- of_node_put(np);
-}
-
-static int __init wsp_ics_init(void)
-{
- struct device_node *dn;
- struct wsp_ics *ics;
- int rc, found;
-
- wsp_ics_set_default_server();
-
- found = 0;
- for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
- found++;
-
- if (found == 0) {
- pr_err("wsp_ics: No ICS's found!\n");
- return -ENODEV;
- }
-
- ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
- if (!ics_list) {
- pr_err("wsp_ics: No memory for structs.\n");
- return -ENOMEM;
- }
-
- num_ics = 0;
- ics = ics_list;
- for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
- rc = wsp_ics_setup(ics, dn);
- if (rc == 0) {
- ics++;
- num_ics++;
- }
- }
-
- if (found != num_ics) {
- pr_err("wsp_ics: Failed setting up %d ICS's\n",
- found - num_ics);
- return -1;
- }
-
- return 0;
-}
-
-void __init wsp_init_irq(void)
-{
- wsp_ics_init();
- xics_init();
-
- /* We need to patch our irq chip's EOI to point to the right ICP */
- wsp_irq_chip.irq_eoi = icp_ops->eoi;
-}
-
-#ifdef CONFIG_PCI_MSI
-static void wsp_ics_msi_unmask_irq(struct irq_data *d)
-{
- wsp_chip_unmask_irq(d);
- unmask_msi_irq(d);
-}
-
-static unsigned int wsp_ics_msi_startup(struct irq_data *d)
-{
- wsp_ics_msi_unmask_irq(d);
- return 0;
-}
-
-static void wsp_ics_msi_mask_irq(struct irq_data *d)
-{
- mask_msi_irq(d);
- wsp_chip_mask_irq(d);
-}
-
-/*
- * we do it this way because we reassinge default EOI handling in
- * irq_init() above
- */
-static void wsp_ics_eoi(struct irq_data *data)
-{
- wsp_irq_chip.irq_eoi(data);
-}
-
-static struct irq_chip wsp_ics_msi = {
- .name = "WSP ICS MSI",
- .irq_startup = wsp_ics_msi_startup,
- .irq_mask = wsp_ics_msi_mask_irq,
- .irq_unmask = wsp_ics_msi_unmask_irq,
- .irq_eoi = wsp_ics_eoi,
- .irq_set_affinity = wsp_chip_set_affinity
-};
-
-void wsp_ics_set_msi_chip(unsigned int irq)
-{
- irq_set_chip(irq, &wsp_ics_msi);
-}
-
-void wsp_ics_set_std_chip(unsigned int irq)
-{
- irq_set_chip(irq, &wsp_irq_chip);
-}
-#endif /* CONFIG_PCI_MSI */
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
deleted file mode 100644
index 07b644e..0000000
--- a/arch/powerpc/platforms/wsp/ics.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2009 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ICS_H
-#define __ICS_H
-
-#define XIVE_ADDR_MASK 0x7FFULL
-
-extern void wsp_init_irq(void);
-
-extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
-extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
-
-#ifdef CONFIG_PCI_MSI
-extern void wsp_ics_set_msi_chip(unsigned int irq);
-extern void wsp_ics_set_std_chip(unsigned int irq);
-#endif /* CONFIG_PCI_MSI */
-
-#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/msi.c b/arch/powerpc/platforms/wsp/msi.c
deleted file mode 100644
index 380882f..0000000
--- a/arch/powerpc/platforms/wsp/msi.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include "msi.h"
-#include "ics.h"
-#include "wsp_pci.h"
-
-/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */
-#define MSI_ADDR_32 0xFFFF0000ul
-#define MSI_ADDR_64 0x1000000000000000ul
-
-int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
- struct pci_controller *phb;
- struct msi_desc *entry;
- struct msi_msg msg;
- unsigned int virq;
- int hwirq;
-
- phb = pci_bus_to_host(dev->bus);
- if (!phb)
- return -ENOENT;
-
- entry = list_first_entry(&dev->msi_list, struct msi_desc, list);
- if (entry->msi_attrib.is_64) {
- msg.address_lo = 0;
- msg.address_hi = MSI_ADDR_64 >> 32;
- } else {
- msg.address_lo = MSI_ADDR_32;
- msg.address_hi = 0;
- }
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- hwirq = wsp_ics_alloc_irq(phb->dn, 1);
- if (hwirq < 0) {
- dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n");
- return hwirq;
- }
-
- virq = irq_create_mapping(NULL, hwirq);
- if (virq == NO_IRQ) {
- dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n");
- return -1;
- }
-
- dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n",
- hwirq, virq);
-
- wsp_ics_set_msi_chip(virq);
- irq_set_msi_desc(virq, entry);
- msg.data = hwirq & XIVE_ADDR_MASK;
- write_msi_msg(virq, &msg);
- }
-
- return 0;
-}
-
-void wsp_teardown_msi_irqs(struct pci_dev *dev)
-{
- struct pci_controller *phb;
- struct msi_desc *entry;
- int hwirq;
-
- phb = pci_bus_to_host(dev->bus);
-
- dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n");
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- if (entry->irq == NO_IRQ)
- continue;
-
- irq_set_msi_desc(entry->irq, NULL);
- wsp_ics_set_std_chip(entry->irq);
-
- hwirq = virq_to_hw(entry->irq);
- /* In this order to avoid racing with irq_create_mapping() */
- irq_dispose_mapping(entry->irq);
- wsp_ics_free_irq(phb->dn, hwirq);
- }
-}
-
-void wsp_setup_phb_msi(struct pci_controller *phb)
-{
- /* Create a single MVE at offset 0 that matches everything */
- out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT);
- out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63);
-
- ppc_md.setup_msi_irqs = wsp_setup_msi_irqs;
- ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs;
-}
diff --git a/arch/powerpc/platforms/wsp/msi.h b/arch/powerpc/platforms/wsp/msi.h
deleted file mode 100644
index 0ab27b7..0000000
--- a/arch/powerpc/platforms/wsp/msi.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __WSP_MSI_H
-#define __WSP_MSI_H
-
-#ifdef CONFIG_PCI_MSI
-extern void wsp_setup_phb_msi(struct pci_controller *phb);
-#else
-static inline void wsp_setup_phb_msi(struct pci_controller *phb) { }
-#endif
-
-#endif /* __WSP_MSI_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
deleted file mode 100644
index 3f67298..0000000
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * IBM Onboard Peripheral Bus Interrupt Controller
- *
- * Copyright 2010 Jack Miller, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/reg_a2.h>
-#include <asm/irq.h>
-
-#define OPB_NR_IRQS 32
-
-#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */
-#define OPB_MLSIR 0x50 /* MLS Interrupt Register */
-#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */
-#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */
-#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */
-
-static int opb_index = 0;
-
-struct opb_pic {
- struct irq_domain *host;
- void *regs;
- int index;
- spinlock_t lock;
-};
-
-static u32 opb_in(struct opb_pic *opb, int offset)
-{
- return in_be32(opb->regs + offset);
-}
-
-static void opb_out(struct opb_pic *opb, int offset, u32 val)
-{
- out_be32(opb->regs + offset, val);
-}
-
-static void opb_unmask_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 ier, bitset;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier | bitset);
- ier = opb_in(opb, OPB_MLSIER);
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 ier, mask;
-
- opb = d->chip_data;
- mask = ~(1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier & mask);
- ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_ack_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 bitset;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- opb_out(opb, OPB_MLSIR, bitset);
- opb_in(opb, OPB_MLSIR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_ack_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 bitset;
- u32 ier, ir;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier & ~bitset);
- ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
- opb_out(opb, OPB_MLSIR, bitset);
- ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
-{
- struct opb_pic *opb;
- unsigned long flags;
- int invert, ipr, mask, bit;
-
- opb = d->chip_data;
-
- /* The only information we're interested in in the type is whether it's
- * a high or low trigger. For high triggered interrupts, the polarity
- * set for it in the MLS Interrupt Polarity Register is 0, for low
- * interrupts it's 1 so that the proper input in the MLS Interrupt Input
- * Register is interrupted as asserting the interrupt. */
-
- switch (flow) {
- case IRQ_TYPE_NONE:
- opb_mask_irq(d);
- return 0;
-
- case IRQ_TYPE_LEVEL_HIGH:
- invert = 0;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- invert = 1;
- break;
-
- default:
- return -EINVAL;
- }
-
- bit = (1 << (31 - irqd_to_hwirq(d)));
- mask = ~bit;
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ipr = opb_in(opb, OPB_MLSIPR);
- ipr = (ipr & mask) | (invert ? bit : 0);
- opb_out(opb, OPB_MLSIPR, ipr);
- ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-
- /* Record the type in the interrupt descriptor */
- irqd_set_trigger_type(d, flow);
-
- return 0;
-}
-
-static struct irq_chip opb_irq_chip = {
- .name = "OPB",
- .irq_mask = opb_mask_irq,
- .irq_unmask = opb_unmask_irq,
- .irq_mask_ack = opb_mask_ack_irq,
- .irq_ack = opb_ack_irq,
- .irq_set_type = opb_set_irq_type
-};
-
-static int opb_host_map(struct irq_domain *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- struct opb_pic *opb;
-
- opb = host->host_data;
-
- /* Most of the important stuff is handled by the generic host code, like
- * the lookup, so just attach some info to the virtual irq */
-
- irq_set_chip_data(virq, opb);
- irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops opb_host_ops = {
- .map = opb_host_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-irqreturn_t opb_irq_handler(int irq, void *private)
-{
- struct opb_pic *opb;
- u32 ir, src, subvirq;
-
- opb = (struct opb_pic *) private;
-
- /* Read the OPB MLS Interrupt Register for
- * asserted interrupts */
- ir = opb_in(opb, OPB_MLSIR);
- if (!ir)
- return IRQ_NONE;
-
- do {
- /* Get 1 - 32 source, *NOT* bit */
- src = 32 - ffs(ir);
-
- /* Translate from the OPB's conception of interrupt number to
- * Linux's virtual IRQ */
-
- subvirq = irq_linear_revmap(opb->host, src);
-
- generic_handle_irq(subvirq);
- } while ((ir = opb_in(opb, OPB_MLSIR)));
-
- return IRQ_HANDLED;
-}
-
-struct opb_pic *opb_pic_init_one(struct device_node *dn)
-{
- struct opb_pic *opb;
- struct resource res;
-
- if (of_address_to_resource(dn, 0, &res)) {
- printk(KERN_ERR "opb: Couldn't translate resource\n");
- return NULL;
- }
-
- opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
- if (!opb) {
- printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
- return NULL;
- }
-
- /* Get access to the OPB MMIO registers */
- opb->regs = ioremap(res.start + 0x10000, 0x1000);
- if (!opb->regs) {
- printk(KERN_ERR "opb: Failed to allocate register space!\n");
- goto free_opb;
- }
-
- /* Allocate an irq domain so that Linux knows that despite only
- * having one interrupt to issue, we're the controller for multiple
- * hardware IRQs, so later we can lookup their virtual IRQs. */
-
- opb->host = irq_domain_add_linear(dn, OPB_NR_IRQS, &opb_host_ops, opb);
- if (!opb->host) {
- printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
- goto free_regs;
- }
-
- opb->index = opb_index++;
- spin_lock_init(&opb->lock);
-
- /* Disable all interrupts by default */
- opb_out(opb, OPB_MLSASIER, 0);
- opb_out(opb, OPB_MLSIER, 0);
-
- /* ACK any interrupts left by FW */
- opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
-
- return opb;
-
-free_regs:
- iounmap(opb->regs);
-free_opb:
- kfree(opb);
- return NULL;
-}
-
-void __init opb_pic_init(void)
-{
- struct device_node *dn;
- struct opb_pic *opb;
- int virq;
- int rc;
-
- /* Call init_one for each OPB device */
- for_each_compatible_node(dn, NULL, "ibm,opb") {
-
- /* Fill in an OPB struct */
- opb = opb_pic_init_one(dn);
- if (!opb) {
- printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
- continue;
- }
-
- /* Map / get opb's hardware virtual irq */
- virq = irq_of_parse_and_map(dn, 0);
- if (virq <= 0) {
- printk("opb: irq_op_parse_and_map failed!\n");
- continue;
- }
-
- /* Attach opb interrupt handler to new virtual IRQ */
- rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
- "OPB LS Cascade", opb);
- if (rc) {
- printk("opb: request_irq failed: %d\n", rc);
- continue;
- }
-
- printk("OPB%d init with %d IRQs at %p\n", opb->index,
- OPB_NR_IRQS, opb->regs);
- }
-}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
deleted file mode 100644
index a87b414..0000000
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/of_fdt.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-
-static void psr2_spin(void)
-{
- hard_irq_disable();
- for (;;)
- continue;
-}
-
-static void psr2_restart(char *cmd)
-{
- psr2_spin();
-}
-
-static int __init psr2_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
- /* chroma systems also claim they are psr2s */
- return 0;
- }
-
- if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
- return 0;
-
- return 1;
-}
-
-define_machine(psr2_md) {
- .name = "PSR2 A2",
- .probe = psr2_probe,
- .setup_arch = wsp_setup_arch,
- .restart = psr2_restart,
- .power_off = psr2_spin,
- .halt = psr2_spin,
- .calibrate_decr = generic_calibrate_decr,
- .init_IRQ = wsp_setup_irq,
- .progress = udbg_progress,
- .power_save = book3e_idle,
-};
-
-machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
deleted file mode 100644
index 268bc89..0000000
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * SCOM support for A2 platforms
- *
- * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
- * Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-#define SCOM_RAMC 0x2a /* Ram Command */
-#define SCOM_RAMC_TGT1_EXT 0x80000000
-#define SCOM_RAMC_SRC1_EXT 0x40000000
-#define SCOM_RAMC_SRC2_EXT 0x20000000
-#define SCOM_RAMC_SRC3_EXT 0x10000000
-#define SCOM_RAMC_ENABLE 0x00080000
-#define SCOM_RAMC_THREADSEL 0x00060000
-#define SCOM_RAMC_EXECUTE 0x00010000
-#define SCOM_RAMC_MSR_OVERRIDE 0x00008000
-#define SCOM_RAMC_MSR_PR 0x00004000
-#define SCOM_RAMC_MSR_GS 0x00002000
-#define SCOM_RAMC_FORCE 0x00001000
-#define SCOM_RAMC_FLUSH 0x00000800
-#define SCOM_RAMC_INTERRUPT 0x00000004
-#define SCOM_RAMC_ERROR 0x00000002
-#define SCOM_RAMC_DONE 0x00000001
-#define SCOM_RAMI 0x29 /* Ram Instruction */
-#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */
-#define SCOM_RAMIC_INSN 0xffffffff00000000
-#define SCOM_RAMD 0x2d /* Ram Data */
-#define SCOM_RAMDH 0x2e /* Ram Data High */
-#define SCOM_RAMDL 0x2f /* Ram Data Low */
-#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */
-#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000
-#define SCOM_PCCR0_ENABLE_RAM 0x40000000
-#define SCOM_THRCTL 0x30 /* Thread Control and Status */
-#define SCOM_THRCTL_T0_STOP 0x80000000
-#define SCOM_THRCTL_T1_STOP 0x40000000
-#define SCOM_THRCTL_T2_STOP 0x20000000
-#define SCOM_THRCTL_T3_STOP 0x10000000
-#define SCOM_THRCTL_T0_STEP 0x08000000
-#define SCOM_THRCTL_T1_STEP 0x04000000
-#define SCOM_THRCTL_T2_STEP 0x02000000
-#define SCOM_THRCTL_T3_STEP 0x01000000
-#define SCOM_THRCTL_T0_RUN 0x00800000
-#define SCOM_THRCTL_T1_RUN 0x00400000
-#define SCOM_THRCTL_T2_RUN 0x00200000
-#define SCOM_THRCTL_T3_RUN 0x00100000
-#define SCOM_THRCTL_T0_PM 0x00080000
-#define SCOM_THRCTL_T1_PM 0x00040000
-#define SCOM_THRCTL_T2_PM 0x00020000
-#define SCOM_THRCTL_T3_PM 0x00010000
-#define SCOM_THRCTL_T0_UDE 0x00008000
-#define SCOM_THRCTL_T1_UDE 0x00004000
-#define SCOM_THRCTL_T2_UDE 0x00002000
-#define SCOM_THRCTL_T3_UDE 0x00001000
-#define SCOM_THRCTL_ASYNC_DIS 0x00000800
-#define SCOM_THRCTL_TB_DIS 0x00000400
-#define SCOM_THRCTL_DEC_DIS 0x00000200
-#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */
-#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */
-
-
-static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
-
-static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
-{
- scom_map_t scom = per_cpu(scom_ptrs, cpu);
- int tcpu;
-
- if (scom_map_ok(scom)) {
- *first_thread = 0;
- return scom;
- }
-
- *first_thread = 1;
-
- scom = scom_map_device(np, 0);
-
- for (tcpu = cpu_first_thread_sibling(cpu);
- tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
- per_cpu(scom_ptrs, tcpu) = scom;
-
- /* Hack: for the boot core, this will actually get called on
- * the second thread up, not the first so our test above will
- * set first_thread incorrectly. */
- if (cpu_first_thread_sibling(cpu) == 0)
- *first_thread = 0;
-
- return scom;
-}
-
-static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
-{
- u64 cmd, mask, val;
- int n = 0;
-
- cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
- | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
- mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
-
- scom_write(scom, SCOM_RAMIC, cmd);
-
- for (;;) {
- if (scom_read(scom, SCOM_RAMC, &val) != 0) {
- pr_err("SCOM error on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -1;
- }
- if (val & mask)
- break;
- pr_devel("Waiting on RAMC = 0x%llx\n", val);
- if (++n == 3) {
- pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -1;
- }
- }
-
- if (val & SCOM_RAMC_INTERRUPT) {
- pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -SCOM_RAMC_INTERRUPT;
- }
-
- if (val & SCOM_RAMC_ERROR) {
- pr_err("RAMC error on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -SCOM_RAMC_ERROR;
- }
-
- return 0;
-}
-
-static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
- u64 *out_gpr)
-{
- int rc;
-
- /* or rN, rN, rN */
- u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
- rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
- if (rc)
- return rc;
-
- return scom_read(scom, SCOM_RAMD, out_gpr);
-}
-
-static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
-{
- int rc, sprhi, sprlo;
- u32 insn;
-
- sprhi = spr >> 5;
- sprlo = spr & 0x1f;
- insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
-
- if (spr == 0x0ff0)
- insn = 0x7c2000a6; /* mfmsr r1 */
-
- rc = a2_scom_ram(scom, thread, insn, 0xf);
- if (rc)
- return rc;
- return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
-}
-
-static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
- int alt, u64 val)
-{
- u32 lis = 0x3c000000 | (gpr << 21);
- u32 li = 0x38000000 | (gpr << 21);
- u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
- u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
- u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
- u32 highest = val >> 48;
- u32 higher = (val >> 32) & 0xffff;
- u32 high = (val >> 16) & 0xffff;
- u32 low = val & 0xffff;
- int lext = alt ? 0x8 : 0x0;
- int oext = alt ? 0xf : 0x0;
- int rc = 0;
-
- if (highest)
- rc |= a2_scom_ram(scom, thread, lis | highest, lext);
-
- if (higher) {
- if (highest)
- rc |= a2_scom_ram(scom, thread, oris | higher, oext);
- else
- rc |= a2_scom_ram(scom, thread, li | higher, lext);
- }
-
- if (highest || higher)
- rc |= a2_scom_ram(scom, thread, rldicr32, oext);
-
- if (high) {
- if (highest || higher)
- rc |= a2_scom_ram(scom, thread, oris | high, oext);
- else
- rc |= a2_scom_ram(scom, thread, lis | high, lext);
- }
-
- if (highest || higher || high)
- rc |= a2_scom_ram(scom, thread, ori | low, oext);
- else
- rc |= a2_scom_ram(scom, thread, li | low, lext);
-
- return rc;
-}
-
-static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
-{
- int sprhi = spr >> 5;
- int sprlo = spr & 0x1f;
- /* mtspr spr, r1 */
- u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
-
- if (spr == 0x0ff0)
- insn = 0x7c200124; /* mtmsr r1 */
-
- if (a2_scom_setgpr(scom, thread, 1, 1, val))
- return -1;
-
- return a2_scom_ram(scom, thread, insn, 0xf);
-}
-
-static int a2_scom_initial_tlb(scom_map_t scom, int thread)
-{
- extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
- extern u32 a2_tlbinit_after_iprot_flush[];
- extern u32 a2_tlbinit_after_linear_map[];
- u32 assoc, entries, i;
- u64 epn, tlbcfg;
- u32 *p;
- int rc;
-
- /* Invalidate all entries (including iprot) */
-
- rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
- if (rc)
- goto scom_fail;
- entries = tlbcfg & TLBnCFG_N_ENTRY;
- assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
- epn = 0;
-
- /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
- a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
- /* Set MMUCR3 to write all thids bit to the TLB */
- a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
-
- /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
- a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
- a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
- for (i = 0; i < entries; i++) {
-
- a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
-
- /* tlbwe */
- rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
- if (rc)
- goto scom_fail;
-
- /* Next entry is new address? */
- if((i + 1) % assoc == 0) {
- epn += (1 << 30);
- a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
- }
- }
-
- /* Setup args for linear mapping */
- rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
- if (rc)
- goto scom_fail;
-
- /* Linear mapping */
- for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
- rc = a2_scom_ram(scom, thread, *p, 0);
- if (rc)
- goto scom_fail;
- }
-
- /*
- * For the boot thread, between the linear mapping and the debug
- * mappings there is a loop to flush iprot mappings. Ramming doesn't do
- * branches, but the secondary threads don't need to be nearly as smart
- * (i.e. we don't need to worry about invalidating the mapping we're
- * standing on).
- */
-
- /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
- for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
- rc = a2_scom_ram(scom, thread, *p, 0);
- if (rc)
- goto scom_fail;
- }
-
-scom_fail:
- if (rc)
- pr_err("Setting up initial TLB failed, err %d\n", rc);
-
- if (rc == -SCOM_RAMC_INTERRUPT) {
- /* Interrupt, dump some status */
- int rc[10];
- u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
- rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
- rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
- rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
- rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
- rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
- rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
- rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
- rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
- rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
- rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
- pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
- pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
- pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
- pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
- pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
- pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
- pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
- pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
- pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
- pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
- }
-
- return rc;
-}
-
-int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
-{
- u64 init_iar, init_msr, init_ccr2;
- unsigned long start_here;
- int rc, core_setup;
- scom_map_t scom;
- u64 pccr0;
-
- scom = get_scom(lcpu, np, &core_setup);
- if (!scom) {
- printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
- return -1;
- }
-
- pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
-
- if (scom_read(scom, SCOM_PCCR0, &pccr0) != 0) {
- printk(KERN_ERR "XSCOM failure readng PCCR0 on CPU%d\n", lcpu);
- return -1;
- }
- scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
- SCOM_PCCR0_ENABLE_RAM);
-
- /* Stop the thead with THRCTL. If we are setting up the TLB we stop all
- * threads. We also disable asynchronous interrupts while RAMing.
- */
- if (core_setup)
- scom_write(scom, SCOM_THRCTL_OR,
- SCOM_THRCTL_T0_STOP |
- SCOM_THRCTL_T1_STOP |
- SCOM_THRCTL_T2_STOP |
- SCOM_THRCTL_T3_STOP |
- SCOM_THRCTL_ASYNC_DIS);
- else
- scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
-
- /* Flush its pipeline just in case */
- scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
- SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
-
- a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
- a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
- a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
-
- /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
- rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
- if (rc) {
- pr_err("Failed to set MSR ! err %d\n", rc);
- return rc;
- }
-
- /* RAM in an sync/isync for the sake of it */
- a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
- a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
-
- if (core_setup) {
- pr_devel("CPU%d is first thread in core, initializing TLB...\n",
- lcpu);
- rc = a2_scom_initial_tlb(scom, thr_idx);
- if (rc)
- goto fail;
- }
-
- start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
- : generic_secondary_thread_init);
- pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
-
- rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
- rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
- get_hard_smp_processor_id(lcpu));
- /*
- * Tell book3e_secondary_core_init not to set up the TLB, we've
- * already done that.
- */
- rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
-
- rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
-
- scom_write(scom, SCOM_RAMC, 0);
- scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
- scom_write(scom, SCOM_PCCR0, pccr0);
-fail:
- pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded");
- if (rc) {
- pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
- init_iar, init_msr, init_ccr2);
- }
-
- return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
deleted file mode 100644
index 6538b4d..0000000
--- a/arch/powerpc/platforms/wsp/scom_wsp.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * SCOM backend for WSP
- *
- * Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/of_address.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-
-static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
-{
- struct resource r;
- u64 xscom_addr;
-
- if (!of_get_property(dev, "scom-controller", NULL)) {
- pr_err("%s: device %s is not a SCOM controller\n",
- __func__, dev->full_name);
- return SCOM_MAP_INVALID;
- }
-
- if (of_address_to_resource(dev, 0, &r)) {
- pr_debug("Failed to find SCOM controller address\n");
- return 0;
- }
-
- /* Transform the SCOM address into an XSCOM offset */
- xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
-
- return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
-}
-
-static void wsp_scom_unmap(scom_map_t map)
-{
- iounmap((void *)map);
-}
-
-static int wsp_scom_read(scom_map_t map, u64 reg, u64 *value)
-{
- u64 __iomem *addr = (u64 __iomem *)map;
-
- *value = in_be64(addr + reg);
-
- return 0;
-}
-
-static int wsp_scom_write(scom_map_t map, u64 reg, u64 value)
-{
- u64 __iomem *addr = (u64 __iomem *)map;
-
- out_be64(addr + reg, value);
-
- return 0;
-}
-
-static const struct scom_controller wsp_scom_controller = {
- .map = wsp_scom_map,
- .unmap = wsp_scom_unmap,
- .read = wsp_scom_read,
- .write = wsp_scom_write
-};
-
-void scom_init_wsp(void)
-{
- scom_init(&wsp_scom_controller);
-}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
deleted file mode 100644
index 11ac2f0..0000000
--- a/arch/powerpc/platforms/wsp/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2010 Michael Ellerman, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include "wsp.h"
-
-/*
- * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
- * Won't work for nodes that are not a descendant of a wsp node.
- */
-int wsp_get_chip_id(struct device_node *dn)
-{
- const u32 *p;
- int rc;
-
- /* Start looking at the specified node, not its parent */
- dn = of_node_get(dn);
- while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
- dn = of_get_next_parent(dn);
-
- if (!dn)
- return -1;
-
- rc = *p;
- of_node_put(dn);
-
- return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
deleted file mode 100644
index 332a18b..0000000
--- a/arch/powerpc/platforms/wsp/smp.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * SMP Support for A2 platforms
- *
- * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/dbell.h>
-#include <asm/machdep.h>
-#include <asm/xics.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-static void smp_a2_setup_cpu(int cpu)
-{
- doorbell_setup_this_cpu();
-
- if (cpu != boot_cpuid)
- xics_setup_cpu();
-}
-
-int smp_a2_kick_cpu(int nr)
-{
- const char *enable_method;
- struct device_node *np;
- int thr_idx;
-
- if (nr < 0 || nr >= NR_CPUS)
- return -ENOENT;
-
- np = of_get_cpu_node(nr, &thr_idx);
- if (!np)
- return -ENODEV;
-
- enable_method = of_get_property(np, "enable-method", NULL);
- pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
-
- if (!enable_method) {
- printk(KERN_ERR "CPU%d has no enable-method\n", nr);
- return -ENOENT;
- } else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
- if (a2_scom_startup_cpu(nr, thr_idx, np))
- return -1;
- } else {
- printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
- nr, enable_method);
- return -EINVAL;
- }
-
- /*
- * The processor is currently spinning, waiting for the
- * cpu_start field to become non-zero After we set cpu_start,
- * the processor will continue on to secondary_start
- */
- paca[nr].cpu_start = 1;
-
- return 0;
-}
-
-static int __init smp_a2_probe(void)
-{
- return num_possible_cpus();
-}
-
-static struct smp_ops_t a2_smp_ops = {
- .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
- .cause_ipi = doorbell_cause_ipi,
- .probe = smp_a2_probe,
- .kick_cpu = smp_a2_kick_cpu,
- .setup_cpu = smp_a2_setup_cpu,
-};
-
-void __init a2_setup_smp(void)
-{
- smp_ops = &a2_smp_ops;
-}
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
deleted file mode 100644
index 58cd1f0..0000000
--- a/arch/powerpc/platforms/wsp/wsp.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/of_address.h>
-
-#include <asm/scom.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-#define WSP_SOC_COMPATIBLE "ibm,wsp-soc"
-#define PBIC_COMPATIBLE "ibm,wsp-pbic"
-#define COPRO_COMPATIBLE "ibm,wsp-coprocessor"
-
-static int __init wsp_probe_buses(void)
-{
- static __initdata struct of_device_id bus_ids[] = {
- /*
- * every node in between needs to be here or you won't
- * find it
- */
- { .compatible = WSP_SOC_COMPATIBLE, },
- { .compatible = PBIC_COMPATIBLE, },
- { .compatible = COPRO_COMPATIBLE, },
- {},
- };
- of_platform_bus_probe(NULL, bus_ids, NULL);
-
- return 0;
-}
-
-void __init wsp_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- scom_init_wsp();
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
- wsp_setup_pci();
-#endif
-}
-
-void __init wsp_setup_irq(void)
-{
- wsp_init_irq();
- opb_pic_init();
-}
-
-
-int __init wsp_probe_devices(void)
-{
- struct device_node *np;
-
- /* Our RTC is a ds1500. It seems to be programatically compatible
- * with the ds1511 for which we have a driver so let's use that
- */
- np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
- if (np != NULL) {
- struct resource res;
- if (of_address_to_resource(np, 0, &res) == 0)
- platform_device_register_simple("ds1511", 0, &res, 1);
- }
-
- wsp_probe_buses();
-
- return 0;
-}
-
-void wsp_halt(void)
-{
- u64 val;
- scom_map_t m;
- struct device_node *dn;
- struct device_node *mine;
- struct device_node *me;
- int rc;
-
- me = of_get_cpu_node(smp_processor_id(), NULL);
- mine = scom_find_parent(me);
-
- /* This will halt all the A2s but not power off the chip */
- for_each_node_with_property(dn, "scom-controller") {
- if (dn == mine)
- continue;
- m = scom_map(dn, 0, 1);
-
- /* read-modify-write it so the HW probe does not get
- * confused */
- rc = scom_read(m, 0, &val);
- if (rc == 0)
- scom_write(m, 0, val | 1);
- scom_unmap(m);
- }
- m = scom_map(mine, 0, 1);
- rc = scom_read(m, 0, &val);
- if (rc == 0)
- scom_write(m, 0, val | 1);
- /* should never return */
- scom_unmap(m);
-}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
deleted file mode 100644
index a563a8a..0000000
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __WSP_H
-#define __WSP_H
-
-#include <asm/wsp.h>
-
-/* Devtree compatible strings for major devices */
-#define PCIE_COMPATIBLE "ibm,wsp-pciex"
-
-extern void wsp_setup_arch(void);
-extern void wsp_setup_irq(void);
-extern int wsp_probe_devices(void);
-extern void wsp_halt(void);
-
-extern void wsp_setup_pci(void);
-extern void scom_init_wsp(void);
-
-extern void a2_setup_smp(void);
-extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
- struct device_node *np);
-extern int smp_a2_kick_cpu(int nr);
-
-extern void opb_pic_init(void);
-
-/* chroma specific managment */
-extern void wsp_h8_restart(char *cmd);
-extern void wsp_h8_power_off(void);
-extern void __init wsp_setup_h8(void);
-
-#endif /* __WSP_H */
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
deleted file mode 100644
index 9a15e5b..0000000
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*
- * Copyright 2010 Ben Herrenschmidt, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/debugfs.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/ppc-pci.h>
-#include <asm/iommu.h>
-#include <asm/io-workarounds.h>
-#include <asm/debug.h>
-
-#include "wsp.h"
-#include "wsp_pci.h"
-#include "msi.h"
-
-
-/* Max number of TVTs for one table. Only 32-bit tables can use
- * multiple TVTs and so the max currently supported is thus 8
- * since only 2G of DMA space is supported
- */
-#define MAX_TABLE_TVT_COUNT 8
-
-struct wsp_dma_table {
- struct list_head link;
- struct iommu_table table;
- struct wsp_phb *phb;
- struct page *tces[MAX_TABLE_TVT_COUNT];
-};
-
-/* We support DMA regions from 0...2G in 32bit space (no support for
- * 64-bit DMA just yet). Each device gets a separate TCE table (TVT
- * entry) with validation enabled (though not supported by SimiCS
- * just yet).
- *
- * To simplify things, we divide this 2G space into N regions based
- * on the constant below which could be turned into a tunable eventually
- *
- * We then assign dynamically those regions to devices as they show up.
- *
- * We use a bitmap as an allocator for these.
- *
- * Tables are allocated/created dynamically as devices are discovered,
- * multiple TVT entries are used if needed
- *
- * When 64-bit DMA support is added we should simply use a separate set
- * of larger regions (the HW supports 64 TVT entries). We can
- * additionally create a bypass region in 64-bit space for performances
- * though that would have a cost in term of security.
- *
- * If you set NUM_DMA32_REGIONS to 1, then a single table is shared
- * for all devices and bus/dev/fn validation is disabled
- *
- * Note that a DMA32 region cannot be smaller than 256M so the max
- * supported here for now is 8. We don't yet support sharing regions
- * between multiple devices so the max number of devices supported
- * is MAX_TABLE_TVT_COUNT.
- */
-#define NUM_DMA32_REGIONS 1
-
-struct wsp_phb {
- struct pci_controller *hose;
-
- /* Lock controlling access to the list of dma tables.
- * It does -not- protect against dma_* operations on
- * those tables, those should be stopped before an entry
- * is removed from the list.
- *
- * The lock is also used for error handling operations
- */
- spinlock_t lock;
- struct list_head dma_tables;
- unsigned long dma32_map;
- unsigned long dma32_base;
- unsigned int dma32_num_regions;
- unsigned long dma32_region_size;
-
- /* Debugfs stuff */
- struct dentry *ddir;
-
- struct list_head all;
-};
-static LIST_HEAD(wsp_phbs);
-
-//#define cfg_debug(fmt...) pr_debug(fmt)
-#define cfg_debug(fmt...)
-
-
-static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- int suboff;
- u64 addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset >= 0x1000)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = PCIE_REG_CA_ENABLE |
- ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
- ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
- ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
- suboff = offset & 3;
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
-
- switch (len) {
- case 1:
- addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
- >> (suboff << 3)) & 0xff;
- cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- case 2:
- addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
- >> (suboff << 3)) & 0xffff;
- cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- default:
- addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
- cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- int suboff;
- u64 addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset >= 0x1000)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = PCIE_REG_CA_ENABLE |
- ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
- ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
- ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
- suboff = offset & 3;
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- val <<= suboff << 3;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- case 2:
- addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- val <<= suboff << 3;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- default:
- addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops wsp_pcie_pci_ops =
-{
- .read = wsp_pcie_read_config,
- .write = wsp_pcie_write_config,
-};
-
-#define TCE_SHIFT 12
-#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
-#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
-#define TCE_PCI_READ 0x1 /* read from PCI allowed */
-#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */
-#define TCE_RPN_SHIFT 12
-
-//#define dma_debug(fmt...) pr_debug(fmt)
-#define dma_debug(fmt...)
-
-static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
- unsigned long uaddr, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct wsp_dma_table *ptbl = container_of(tbl,
- struct wsp_dma_table,
- table);
- u64 proto_tce;
- u64 *tcep;
- u64 rpn;
-
- proto_tce = TCE_PCI_READ;
-#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- proto_tce |= TCE_PCI_WRITE;
-#else
- if (direction != DMA_TO_DEVICE)
- proto_tce |= TCE_PCI_WRITE;
-#endif
-
- /* XXX Make this faster by factoring out the page address for
- * within a TCE table
- */
- while (npages--) {
- /* We don't use it->base as the table can be scattered */
- tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
- tcep += (index & 0xffff);
-
- /* can't move this out since we might cross LMB boundary */
- rpn = __pa(uaddr) >> TCE_SHIFT;
- *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
-
- dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
- tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT_4K);
-
- uaddr += TCE_PAGE_SIZE;
- index++;
- }
- return 0;
-}
-
-static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
-{
- struct wsp_dma_table *ptbl = container_of(tbl,
- struct wsp_dma_table,
- table);
-#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- struct pci_controller *hose = ptbl->phb->hose;
-#endif
- u64 *tcep;
-
- /* XXX Make this faster by factoring out the page address for
- * within a TCE table. Also use line-kill option to kill multiple
- * TCEs at once
- */
- while (npages--) {
- /* We don't use it->base as the table can be scattered */
- tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
- tcep += (index & 0xffff);
- dma_debug("[DMA] TCE %p cleared\n", tcep);
- *tcep = 0;
-#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- /* Don't write there since it would pollute other MMIO accesses */
- out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
- PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
- (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
-#endif
- index++;
- }
-}
-
-static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
- unsigned int region,
- struct pci_dev *validate)
-{
- struct pci_controller *hose = phb->hose;
- unsigned long size = phb->dma32_region_size;
- unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
- struct wsp_dma_table *tbl;
- int tvts_per_table, i, tvt, nid;
- unsigned long flags;
-
- nid = of_node_to_nid(phb->hose->dn);
-
- /* Calculate how many TVTs are needed */
- tvts_per_table = size / 0x10000000;
- if (tvts_per_table == 0)
- tvts_per_table = 1;
-
- /* Calculate the base TVT index. We know all tables have the same
- * size so we just do a simple multiply here
- */
- tvt = region * tvts_per_table;
-
- pr_debug(" Region : %d\n", region);
- pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
- pr_debug(" Number of TVTs : %d\n", tvts_per_table);
- pr_debug(" Base TVT : %d\n", tvt);
- pr_debug(" Node : %d\n", nid);
-
- tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
- if (!tbl)
- return ERR_PTR(-ENOMEM);
- tbl->phb = phb;
-
- /* Create as many TVTs as needed, each represents 256M at most */
- for (i = 0; i < tvts_per_table; i++) {
- u64 tvt_data1, tvt_data0;
-
- /* Allocate table. We use a 4K TCE size for now always so
- * one table is always 8 * (258M / 4K) == 512K
- */
- tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
- if (tbl->tces[i] == NULL)
- goto fail;
- memset(page_address(tbl->tces[i]), 0, 0x80000);
-
- pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
-
- /* Table size. We currently set it to be the whole 256M region */
- tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
- /* IO page size set to 4K */
- tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
- /* Shift in the address */
- tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
-
- /* Validation stuff. We only validate fully bus/dev/fn for now
- * one day maybe we can group devices but that isn't the case
- * at the moment
- */
- if (validate) {
- tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
- tvt_data0 |= validate->bus->number;
- tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
- tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
- << IODA_TVT1_DEVNUM_VALUE_SHIFT;
- tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
- tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
- << IODA_TVT1_FUNCNUM_VALUE_SHIFT;
- }
-
- /* XX PE number is always 0 for now */
-
- /* Program the values using the PHB lock */
- spin_lock_irqsave(&phb->lock, flags);
- out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
- (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
- spin_unlock_irqrestore(&phb->lock, flags);
- }
-
- /* Init bits and pieces */
- tbl->table.it_blocksize = 16;
- tbl->table.it_page_shift = IOMMU_PAGE_SHIFT_4K;
- tbl->table.it_offset = addr >> tbl->table.it_page_shift;
- tbl->table.it_size = size >> tbl->table.it_page_shift;
-
- /*
- * It's already blank but we clear it anyway.
- * Consider an aditiona interface that makes cleaing optional
- */
- iommu_init_table(&tbl->table, nid);
-
- list_add(&tbl->link, &phb->dma_tables);
- return tbl;
-
- fail:
- pr_debug(" Failed to allocate a 256M TCE table !\n");
- for (i = 0; i < tvts_per_table; i++)
- if (tbl->tces[i])
- __free_pages(tbl->tces[i], get_order(0x80000));
- kfree(tbl);
- return ERR_PTR(-ENOMEM);
-}
-
-static void wsp_pci_dma_dev_setup(struct pci_dev *pdev)
-{
- struct dev_archdata *archdata = &pdev->dev.archdata;
- struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- struct wsp_phb *phb = hose->private_data;
- struct wsp_dma_table *table = NULL;
- unsigned long flags;
- int i;
-
- /* Don't assign an iommu table to a bridge */
- if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- return;
-
- pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
-
- spin_lock_irqsave(&phb->lock, flags);
-
- /* If only one region, check if it already exist */
- if (phb->dma32_num_regions == 1) {
- spin_unlock_irqrestore(&phb->lock, flags);
- if (list_empty(&phb->dma_tables))
- table = wsp_pci_create_dma32_table(phb, 0, NULL);
- else
- table = list_first_entry(&phb->dma_tables,
- struct wsp_dma_table,
- link);
- } else {
- /* else find a free region */
- for (i = 0; i < phb->dma32_num_regions && !table; i++) {
- if (__test_and_set_bit(i, &phb->dma32_map))
- continue;
- spin_unlock_irqrestore(&phb->lock, flags);
- table = wsp_pci_create_dma32_table(phb, i, pdev);
- }
- }
-
- /* Check if we got an error */
- if (IS_ERR(table)) {
- pr_err("%s: Failed to create DMA table, err %ld !\n",
- pci_name(pdev), PTR_ERR(table));
- return;
- }
-
- /* Or a valid table */
- if (table) {
- pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
- pci_name(pdev),
- table->table.it_offset << IOMMU_PAGE_SHIFT_4K,
- (table->table.it_offset << IOMMU_PAGE_SHIFT_4K)
- + phb->dma32_region_size - 1);
- archdata->dma_data.iommu_table_base = &table->table;
- return;
- }
-
- /* Or no room */
- spin_unlock_irqrestore(&phb->lock, flags);
- pr_err("%s: Out of DMA space !\n", pci_name(pdev));
-}
-
-static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
-{
- u64 val;
- int i;
-
-#define DUMP_REG(x) \
- pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-
- /*
- * Some WSP variants has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge
- */
- val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
- pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
- out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
- (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
- pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-
-#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- /* XXX Disable TCE caching, it doesn't work on DD1 */
- out_be64(hose->cfg_data + 0xe50,
- in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
- printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
-#endif
-
- /* Configure M32A and IO. IO is hard wired to be 1M for now */
- out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
- out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
- (~(hose->io_resource.end - hose->io_resource.start)) &
- 0x3fffffff000ul);
- out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
-
- out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
- hose->mem_resources[0].start);
- printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
- (~(hose->mem_resources[0].end -
- hose->mem_resources[0].start)) & 0x3ffffff0000ul);
- out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
- (~(hose->mem_resources[0].end -
- hose->mem_resources[0].start)) & 0x3ffffff0000ul);
- out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
- (hose->mem_resources[0].start - hose->mem_offset[0]) | 1);
-
- /* Clear all TVT entries
- *
- * XX Might get TVT count from device-tree
- */
- for (i = 0; i < IODA_TVT_COUNT; i++) {
- out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
- PCIE_REG_IODA_AD_TBL_TVT | i);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
- }
-
- /* Kill the TCE cache */
- out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
- in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
- PCIE_REG_PHBC_64B_TCE_EN);
-
- /* Enable 32 & 64-bit MSIs, IO space and M32A */
- val = PCIE_REG_PHBC_32BIT_MSI_EN |
- PCIE_REG_PHBC_IO_EN |
- PCIE_REG_PHBC_64BIT_MSI_EN |
- PCIE_REG_PHBC_M32A_EN;
- if (iommu_is_off)
- val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
- pr_debug("Will write config: 0x%llx\n", val);
- out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
-
- /* Enable error reporting */
- out_be64(hose->cfg_data + 0xe00,
- in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
-
- /* Mask an error that's generated when doing config space probe
- *
- * XXX Maybe we should only mask it around config space cycles... that or
- * ignore it when we know we had a config space cycle recently ?
- */
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
-
- /* Enable UTL errors, for now, all of them got to UTL irq 1
- *
- * We similarily mask one UTL error caused apparently during normal
- * probing. We also mask the link up error
- */
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
- out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
- out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
-
- DUMP_REG(PCIE_REG_IO_BASE_ADDR);
- DUMP_REG(PCIE_REG_IO_BASE_MASK);
- DUMP_REG(PCIE_REG_IO_START_ADDR);
- DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
- DUMP_REG(PCIE_REG_M32A_BASE_MASK);
- DUMP_REG(PCIE_REG_M32A_START_ADDR);
- DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
- DUMP_REG(PCIE_REG_M32B_BASE_MASK);
- DUMP_REG(PCIE_REG_M32B_START_ADDR);
- DUMP_REG(PCIE_REG_M64_BASE_ADDR);
- DUMP_REG(PCIE_REG_M64_BASE_MASK);
- DUMP_REG(PCIE_REG_M64_START_ADDR);
- DUMP_REG(PCIE_REG_PHB_CONFIG);
-}
-
-static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
-{
- u64 val;
- int i;
-
- for (i = 0; i < 10000; i++) {
- val = in_be64(phb->hose->cfg_data + 0xe08);
- if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
- return;
- udelay(1);
- }
- pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
- phb->hose->global_number, port);
-}
-
-#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \
-static ret wsp_pci_##name at \
-{ \
- struct iowa_bus *bus; \
- struct wsp_phb *phb; \
- unsigned long flags; \
- ret rval; \
- bus = iowa_pio_find_bus(aa); \
- WARN_ON(!bus); \
- phb = bus->private; \
- spin_lock_irqsave(&phb->lock, flags); \
- wsp_pci_wait_io_idle(phb, aa); \
- rval = __do_##name al; \
- spin_unlock_irqrestore(&phb->lock, flags); \
- return rval; \
-}
-
-#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \
-static void wsp_pci_##name at \
-{ \
- struct iowa_bus *bus; \
- struct wsp_phb *phb; \
- unsigned long flags; \
- bus = iowa_pio_find_bus(aa); \
- WARN_ON(!bus); \
- phb = bus->private; \
- spin_lock_irqsave(&phb->lock, flags); \
- wsp_pci_wait_io_idle(phb, aa); \
- __do_##name al; \
- spin_unlock_irqrestore(&phb->lock, flags); \
-}
-
-#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
-#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
-
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
- DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
-
-#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
- DEF_PCI_AC_NORET_##space(name, at, al, aa) \
-
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-static struct ppc_pci_io wsp_pci_iops = {
- .inb = wsp_pci_inb,
- .inw = wsp_pci_inw,
- .inl = wsp_pci_inl,
- .outb = wsp_pci_outb,
- .outw = wsp_pci_outw,
- .outl = wsp_pci_outl,
- .insb = wsp_pci_insb,
- .insw = wsp_pci_insw,
- .insl = wsp_pci_insl,
- .outsb = wsp_pci_outsb,
- .outsw = wsp_pci_outsw,
- .outsl = wsp_pci_outsl,
-};
-
-static int __init wsp_setup_one_phb(struct device_node *np)
-{
- struct pci_controller *hose;
- struct wsp_phb *phb;
-
- pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
-
- phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
- if (!phb)
- return -ENOMEM;
- hose = pcibios_alloc_controller(np);
- if (!hose) {
- /* Can't really free the phb */
- return -ENOMEM;
- }
- hose->private_data = phb;
- phb->hose = hose;
-
- INIT_LIST_HEAD(&phb->dma_tables);
- spin_lock_init(&phb->lock);
-
- /* XXX Use bus-range property ? */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* We use cfg_data as the address for the whole bridge MMIO space
- */
- hose->cfg_data = of_iomap(hose->dn, 0);
-
- pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
-
- /* Get the ranges of the device-tree */
- pci_process_bridge_OF_ranges(hose, np, 0);
-
- /* XXX Force re-assigning of everything for now */
- pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
- PCI_ENABLE_PROC_DOMAINS);
-
- /* Calculate how the TCE space is divided */
- phb->dma32_base = 0;
- phb->dma32_num_regions = NUM_DMA32_REGIONS;
- if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
- pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
- MAX_TABLE_TVT_COUNT);
- phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
- }
- phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions;
-
- BUG_ON(!is_power_of_2(phb->dma32_region_size));
-
- /* Setup config ops */
- hose->ops = &wsp_pcie_pci_ops;
-
- /* Configure the HW */
- wsp_pcie_configure_hw(hose);
-
- /* Instanciate IO workarounds */
- iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
-#ifdef CONFIG_PCI_MSI
- wsp_setup_phb_msi(hose);
-#endif
-
- /* Add to global list */
- list_add(&phb->all, &wsp_phbs);
-
- return 0;
-}
-
-void __init wsp_setup_pci(void)
-{
- struct device_node *np;
- int rc;
-
- /* Find host bridges */
- for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
- rc = wsp_setup_one_phb(np);
- if (rc)
- pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
- np->full_name, rc);
- }
-
- /* Establish device-tree linkage */
- pci_devs_phb_init();
-
- /* Set DMA ops to use TCEs */
- if (iommu_is_off) {
- pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
- set_pci_dma_ops(&dma_direct_ops);
- } else {
- ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
- ppc_md.tce_build = tce_build_wsp;
- ppc_md.tce_free = tce_free_wsp;
- set_pci_dma_ops(&dma_iommu_ops);
- }
-}
-
-#define err_debug(fmt...) pr_debug(fmt)
-//#define err_debug(fmt...)
-
-static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
-{
- const u32 *prop;
- int hw_irq;
-
- /* Ok, no interrupts property, let's try to find our child P2P */
- np = of_get_next_child(np, NULL);
- if (np == NULL)
- return 0;
-
- /* Grab it's interrupt map */
- prop = of_get_property(np, "interrupt-map", NULL);
- if (prop == NULL)
- return 0;
-
- /* Grab one of the interrupts in there, keep the low 4 bits */
- hw_irq = prop[5] & 0xf;
-
- /* 0..4 for PHB 0 and 5..9 for PHB 1 */
- if (hw_irq < 5)
- hw_irq = 4;
- else
- hw_irq = 9;
- hw_irq |= prop[5] & ~0xf;
-
- err_debug("PCI: Using 0x%x as error IRQ for %s\n",
- hw_irq, np->parent->full_name);
- return irq_create_mapping(NULL, hw_irq);
-}
-
-static const struct {
- u32 offset;
- const char *name;
-} wsp_pci_regs[] = {
-#define DREG(x) { PCIE_REG_##x, #x }
-#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
- /* Architected registers except CONFIG_ and IODA
- * to avoid side effects
- */
- DREG(DMA_CHAN_STATUS),
- DREG(CPU_LOADSTORE_STATUS),
- DREG(LOCK0),
- DREG(LOCK1),
- DREG(PHB_CONFIG),
- DREG(IO_BASE_ADDR),
- DREG(IO_BASE_MASK),
- DREG(IO_START_ADDR),
- DREG(M32A_BASE_ADDR),
- DREG(M32A_BASE_MASK),
- DREG(M32A_START_ADDR),
- DREG(M32B_BASE_ADDR),
- DREG(M32B_BASE_MASK),
- DREG(M32B_START_ADDR),
- DREG(M64_BASE_ADDR),
- DREG(M64_BASE_MASK),
- DREG(M64_START_ADDR),
- DREG(TCE_KILL),
- DREG(LOCK2),
- DREG(PHB_GEN_CAP),
- DREG(PHB_TCE_CAP),
- DREG(PHB_IRQ_CAP),
- DREG(PHB_EEH_CAP),
- DREG(PAPR_ERR_INJ_CONTROL),
- DREG(PAPR_ERR_INJ_ADDR),
- DREG(PAPR_ERR_INJ_MASK),
-
- /* UTL core regs */
- DUTL(SYS_BUS_CONTROL),
- DUTL(STATUS),
- DUTL(SYS_BUS_AGENT_STATUS),
- DUTL(SYS_BUS_AGENT_ERR_SEV),
- DUTL(SYS_BUS_AGENT_IRQ_EN),
- DUTL(SYS_BUS_BURST_SZ_CONF),
- DUTL(REVISION_ID),
- DUTL(OUT_POST_HDR_BUF_ALLOC),
- DUTL(OUT_POST_DAT_BUF_ALLOC),
- DUTL(IN_POST_HDR_BUF_ALLOC),
- DUTL(IN_POST_DAT_BUF_ALLOC),
- DUTL(OUT_NP_BUF_ALLOC),
- DUTL(IN_NP_BUF_ALLOC),
- DUTL(PCIE_TAGS_ALLOC),
- DUTL(GBIF_READ_TAGS_ALLOC),
-
- DUTL(PCIE_PORT_CONTROL),
- DUTL(PCIE_PORT_STATUS),
- DUTL(PCIE_PORT_ERROR_SEV),
- DUTL(PCIE_PORT_IRQ_EN),
- DUTL(RC_STATUS),
- DUTL(RC_ERR_SEVERITY),
- DUTL(RC_IRQ_EN),
- DUTL(EP_STATUS),
- DUTL(EP_ERR_SEVERITY),
- DUTL(EP_ERR_IRQ_EN),
- DUTL(PCI_PM_CTRL1),
- DUTL(PCI_PM_CTRL2),
-
- /* PCIe stack regs */
- DREG(SYSTEM_CONFIG1),
- DREG(SYSTEM_CONFIG2),
- DREG(EP_SYSTEM_CONFIG),
- DREG(EP_FLR),
- DREG(EP_BAR_CONFIG),
- DREG(LINK_CONFIG),
- DREG(PM_CONFIG),
- DREG(DLP_CONTROL),
- DREG(DLP_STATUS),
- DREG(ERR_REPORT_CONTROL),
- DREG(SLOT_CONTROL1),
- DREG(SLOT_CONTROL2),
- DREG(UTL_CONFIG),
- DREG(BUFFERS_CONFIG),
- DREG(ERROR_INJECT),
- DREG(SRIOV_CONFIG),
- DREG(PF0_SRIOV_STATUS),
- DREG(PF1_SRIOV_STATUS),
- DREG(PORT_NUMBER),
- DREG(POR_SYSTEM_CONFIG),
-
- /* Internal logic regs */
- DREG(PHB_VERSION),
- DREG(RESET),
- DREG(PHB_CONTROL),
- DREG(PHB_TIMEOUT_CONTROL1),
- DREG(PHB_QUIESCE_DMA),
- DREG(PHB_DMA_READ_TAG_ACTV),
- DREG(PHB_TCE_READ_TAG_ACTV),
-
- /* FIR registers */
- DREG(LEM_FIR_ACCUM),
- DREG(LEM_FIR_AND_MASK),
- DREG(LEM_FIR_OR_MASK),
- DREG(LEM_ACTION0),
- DREG(LEM_ACTION1),
- DREG(LEM_ERROR_MASK),
- DREG(LEM_ERROR_AND_MASK),
- DREG(LEM_ERROR_OR_MASK),
-
- /* Error traps registers */
- DREG(PHB_ERR_STATUS),
- DREG(PHB_ERR_STATUS),
- DREG(PHB_ERR1_STATUS),
- DREG(PHB_ERR_INJECT),
- DREG(PHB_ERR_LEM_ENABLE),
- DREG(PHB_ERR_IRQ_ENABLE),
- DREG(PHB_ERR_FREEZE_ENABLE),
- DREG(PHB_ERR_SIDE_ENABLE),
- DREG(PHB_ERR_LOG_0),
- DREG(PHB_ERR_LOG_1),
- DREG(PHB_ERR_STATUS_MASK),
- DREG(PHB_ERR1_STATUS_MASK),
- DREG(MMIO_ERR_STATUS),
- DREG(MMIO_ERR1_STATUS),
- DREG(MMIO_ERR_INJECT),
- DREG(MMIO_ERR_LEM_ENABLE),
- DREG(MMIO_ERR_IRQ_ENABLE),
- DREG(MMIO_ERR_FREEZE_ENABLE),
- DREG(MMIO_ERR_SIDE_ENABLE),
- DREG(MMIO_ERR_LOG_0),
- DREG(MMIO_ERR_LOG_1),
- DREG(MMIO_ERR_STATUS_MASK),
- DREG(MMIO_ERR1_STATUS_MASK),
- DREG(DMA_ERR_STATUS),
- DREG(DMA_ERR1_STATUS),
- DREG(DMA_ERR_INJECT),
- DREG(DMA_ERR_LEM_ENABLE),
- DREG(DMA_ERR_IRQ_ENABLE),
- DREG(DMA_ERR_FREEZE_ENABLE),
- DREG(DMA_ERR_SIDE_ENABLE),
- DREG(DMA_ERR_LOG_0),
- DREG(DMA_ERR_LOG_1),
- DREG(DMA_ERR_STATUS_MASK),
- DREG(DMA_ERR1_STATUS_MASK),
-
- /* Debug and Trace registers */
- DREG(PHB_DEBUG_CONTROL0),
- DREG(PHB_DEBUG_STATUS0),
- DREG(PHB_DEBUG_CONTROL1),
- DREG(PHB_DEBUG_STATUS1),
- DREG(PHB_DEBUG_CONTROL2),
- DREG(PHB_DEBUG_STATUS2),
- DREG(PHB_DEBUG_CONTROL3),
- DREG(PHB_DEBUG_STATUS3),
- DREG(PHB_DEBUG_CONTROL4),
- DREG(PHB_DEBUG_STATUS4),
- DREG(PHB_DEBUG_CONTROL5),
- DREG(PHB_DEBUG_STATUS5),
-
- /* Don't seem to exist ...
- DREG(PHB_DEBUG_CONTROL6),
- DREG(PHB_DEBUG_STATUS6),
- */
-};
-
-static int wsp_pci_regs_show(struct seq_file *m, void *private)
-{
- struct wsp_phb *phb = m->private;
- struct pci_controller *hose = phb->hose;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
- /* Skip write-only regs */
- if (wsp_pci_regs[i].offset == 0xc08 ||
- wsp_pci_regs[i].offset == 0xc10 ||
- wsp_pci_regs[i].offset == 0xc38 ||
- wsp_pci_regs[i].offset == 0xc40)
- continue;
- seq_printf(m, "0x%03x: 0x%016llx %s\n",
- wsp_pci_regs[i].offset,
- in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
- wsp_pci_regs[i].name);
- }
- return 0;
-}
-
-static int wsp_pci_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, wsp_pci_regs_show, inode->i_private);
-}
-
-static const struct file_operations wsp_pci_regs_fops = {
- .open = wsp_pci_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int wsp_pci_reg_set(void *data, u64 val)
-{
- out_be64((void __iomem *)data, val);
- return 0;
-}
-
-static int wsp_pci_reg_get(void *data, u64 *val)
-{
- *val = in_be64((void __iomem *)data);
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
-
-static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
-{
- struct wsp_phb *phb = dev_id;
- struct pci_controller *hose = phb->hose;
- irqreturn_t handled = IRQ_NONE;
- struct wsp_pcie_err_log_data ed;
-
- pr_err("PCI: Error interrupt on %s (PHB %d)\n",
- hose->dn->full_name, hose->global_number);
- again:
- memset(&ed, 0, sizeof(ed));
-
- /* Read and clear UTL errors */
- ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
- if (ed.utl_sys_err)
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
- ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
- if (ed.utl_port_err)
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
- ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
- if (ed.utl_rc_err)
- out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
-
- /* Read and clear main trap errors */
- ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
- if (ed.phb_err) {
- ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
- ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
- ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
- }
- ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
- if (ed.mmio_err) {
- ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
- ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
- ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
- }
- ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
- if (ed.dma_err) {
- ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
- ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
- ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
- }
-
- /* Now print things out */
- if (ed.phb_err) {
- pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err);
- pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1);
- pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0);
- pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1);
- }
- if (ed.mmio_err) {
- pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err);
- pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
- pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0);
- pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1);
- }
- if (ed.dma_err) {
- pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err);
- pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1);
- pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0);
- pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1);
- }
- if (ed.utl_sys_err)
- pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err);
- if (ed.utl_port_err)
- pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
- if (ed.utl_rc_err)
- pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err);
-
- /* Interrupts are caused by the error traps. If we had any error there
- * we loop again in case the UTL buffered some new stuff between
- * going there and going to the traps
- */
- if (ed.dma_err || ed.mmio_err || ed.phb_err) {
- handled = IRQ_HANDLED;
- goto again;
- }
- return handled;
-}
-
-static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
-{
- struct pci_controller *hose = phb->hose;
- int err_irq, i, rc;
- char fname[16];
-
- /* Create a debugfs file for that PHB */
- sprintf(fname, "phb%d", phb->hose->global_number);
- phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
-
- /* Some useful debug output */
- if (phb->ddir) {
- struct dentry *d = debugfs_create_dir("regs", phb->ddir);
- char tmp[64];
-
- for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
- sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
- wsp_pci_regs[i].name);
- debugfs_create_file(tmp, 0600, d,
- hose->cfg_data + wsp_pci_regs[i].offset,
- &wsp_pci_reg_fops);
- }
- debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
- }
-
- /* Find the IRQ number for that PHB */
- err_irq = irq_of_parse_and_map(hose->dn, 0);
- if (err_irq == 0)
- /* XXX Error IRQ lacking from device-tree */
- err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
- if (err_irq == 0) {
- pr_err("PCI: Failed to fetch error interrupt for %s\n",
- hose->dn->full_name);
- return;
- }
- /* Request it */
- rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
- if (rc) {
- pr_err("PCI: Failed to request interrupt for %s\n",
- hose->dn->full_name);
- }
- /* Enable interrupts for all errors for now */
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
-}
-
-/*
- * This is called later to hookup with the error interrupt
- */
-static int __init wsp_setup_pci_late(void)
-{
- struct wsp_phb *phb;
-
- list_for_each_entry(phb, &wsp_phbs, all)
- wsp_setup_pci_err_reporting(phb);
-
- return 0;
-}
-arch_initcall(wsp_setup_pci_late);
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.h b/arch/powerpc/platforms/wsp/wsp_pci.h
deleted file mode 100644
index 52e9bd9..0000000
--- a/arch/powerpc/platforms/wsp/wsp_pci.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2010 Ben Herrenschmidt, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __WSP_PCI_H
-#define __WSP_PCI_H
-
-/* Architected registers */
-#define PCIE_REG_DMA_CHAN_STATUS 0x110
-#define PCIE_REG_CPU_LOADSTORE_STATUS 0x120
-
-#define PCIE_REG_CONFIG_DATA 0x130
-#define PCIE_REG_LOCK0 0x138
-#define PCIE_REG_CONFIG_ADDRESS 0x140
-#define PCIE_REG_CA_ENABLE 0x8000000000000000ull
-#define PCIE_REG_CA_BUS_MASK 0x0ff0000000000000ull
-#define PCIE_REG_CA_BUS_SHIFT (20+32)
-#define PCIE_REG_CA_DEV_MASK 0x000f800000000000ull
-#define PCIE_REG_CA_DEV_SHIFT (15+32)
-#define PCIE_REG_CA_FUNC_MASK 0x0000700000000000ull
-#define PCIE_REG_CA_FUNC_SHIFT (12+32)
-#define PCIE_REG_CA_REG_MASK 0x00000fff00000000ull
-#define PCIE_REG_CA_REG_SHIFT ( 0+32)
-#define PCIE_REG_CA_BE_MASK 0x00000000f0000000ull
-#define PCIE_REG_CA_BE_SHIFT ( 28)
-#define PCIE_REG_LOCK1 0x148
-
-#define PCIE_REG_PHB_CONFIG 0x160
-#define PCIE_REG_PHBC_64B_TCE_EN 0x2000000000000000ull
-#define PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN 0x1000000000000000ull
-#define PCIE_REG_PHBC_32BIT_MSI_EN 0x0080000000000000ull
-#define PCIE_REG_PHBC_M64_EN 0x0040000000000000ull
-#define PCIE_REG_PHBC_IO_EN 0x0008000000000000ull
-#define PCIE_REG_PHBC_64BIT_MSI_EN 0x0002000000000000ull
-#define PCIE_REG_PHBC_M32A_EN 0x0000800000000000ull
-#define PCIE_REG_PHBC_M32B_EN 0x0000400000000000ull
-#define PCIE_REG_PHBC_MSI_PE_VALIDATE 0x0000200000000000ull
-#define PCIE_REG_PHBC_DMA_XLATE_BYPASS 0x0000100000000000ull
-
-#define PCIE_REG_IO_BASE_ADDR 0x170
-#define PCIE_REG_IO_BASE_MASK 0x178
-#define PCIE_REG_IO_START_ADDR 0x180
-
-#define PCIE_REG_M32A_BASE_ADDR 0x190
-#define PCIE_REG_M32A_BASE_MASK 0x198
-#define PCIE_REG_M32A_START_ADDR 0x1a0
-
-#define PCIE_REG_M32B_BASE_ADDR 0x1b0
-#define PCIE_REG_M32B_BASE_MASK 0x1b8
-#define PCIE_REG_M32B_START_ADDR 0x1c0
-
-#define PCIE_REG_M64_BASE_ADDR 0x1e0
-#define PCIE_REG_M64_BASE_MASK 0x1e8
-#define PCIE_REG_M64_START_ADDR 0x1f0
-
-#define PCIE_REG_TCE_KILL 0x210
-#define PCIE_REG_TCEKILL_SINGLE 0x8000000000000000ull
-#define PCIE_REG_TCEKILL_ADDR_MASK 0x000003fffffffff8ull
-#define PCIE_REG_TCEKILL_PS_4K 0
-#define PCIE_REG_TCEKILL_PS_64K 1
-#define PCIE_REG_TCEKILL_PS_16M 2
-#define PCIE_REG_TCEKILL_PS_16G 3
-
-#define PCIE_REG_IODA_ADDR 0x220
-#define PCIE_REG_IODA_AD_AUTOINC 0x8000000000000000ull
-#define PCIE_REG_IODA_AD_TBL_MVT 0x0005000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PELT 0x0006000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PESTA 0x0007000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PESTB 0x0008000000000000ull
-#define PCIE_REG_IODA_AD_TBL_TVT 0x0009000000000000ull
-#define PCIE_REG_IODA_AD_TBL_TCE 0x000a000000000000ull
-#define PCIE_REG_IODA_DATA0 0x228
-#define PCIE_REG_IODA_DATA1 0x230
-
-#define PCIE_REG_LOCK2 0x240
-
-#define PCIE_REG_PHB_GEN_CAP 0x250
-#define PCIE_REG_PHB_TCE_CAP 0x258
-#define PCIE_REG_PHB_IRQ_CAP 0x260
-#define PCIE_REG_PHB_EEH_CAP 0x268
-
-#define PCIE_REG_PAPR_ERR_INJ_CONTROL 0x2b0
-#define PCIE_REG_PAPR_ERR_INJ_ADDR 0x2b8
-#define PCIE_REG_PAPR_ERR_INJ_MASK 0x2c0
-
-
-#define PCIE_REG_SYS_CFG1 0x600
-#define PCIE_REG_SYS_CFG1_CLASS_CODE 0x0000000000ffffffull
-
-#define IODA_TVT0_TTA_MASK 0x000fffffffff0000ull
-#define IODA_TVT0_TTA_SHIFT 4
-#define IODA_TVT0_BUSNUM_VALID_MASK 0x000000000000e000ull
-#define IODA_TVT0_TCE_TABLE_SIZE_MASK 0x0000000000001f00ull
-#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT 8
-#define IODA_TVT0_BUSNUM_VALUE_MASK 0x00000000000000ffull
-#define IODA_TVT0_BUSNUM_VALID_SHIFT 0
-#define IODA_TVT1_DEVNUM_VALID 0x2000000000000000ull
-#define IODA_TVT1_DEVNUM_VALUE_MASK 0x1f00000000000000ull
-#define IODA_TVT1_DEVNUM_VALUE_SHIFT 56
-#define IODA_TVT1_FUNCNUM_VALID 0x0008000000000000ull
-#define IODA_TVT1_FUNCNUM_VALUE_MASK 0x0007000000000000ull
-#define IODA_TVT1_FUNCNUM_VALUE_SHIFT 48
-#define IODA_TVT1_IO_PAGE_SIZE_MASK 0x00001f0000000000ull
-#define IODA_TVT1_IO_PAGE_SIZE_SHIFT 40
-#define IODA_TVT1_PE_NUMBER_MASK 0x000000000000003full
-#define IODA_TVT1_PE_NUMBER_SHIFT 0
-
-#define IODA_TVT_COUNT 64
-
-/* UTL Core registers */
-#define PCIE_UTL_SYS_BUS_CONTROL 0x400
-#define PCIE_UTL_STATUS 0x408
-#define PCIE_UTL_SYS_BUS_AGENT_STATUS 0x410
-#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV 0x418
-#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN 0x420
-#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF 0x440
-#define PCIE_UTL_REVISION_ID 0x448
-
-#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC 0x4c0
-#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC 0x4d0
-#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC 0x4e0
-#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC 0x4f0
-#define PCIE_UTL_OUT_NP_BUF_ALLOC 0x500
-#define PCIE_UTL_IN_NP_BUF_ALLOC 0x510
-#define PCIE_UTL_PCIE_TAGS_ALLOC 0x520
-#define PCIE_UTL_GBIF_READ_TAGS_ALLOC 0x530
-
-#define PCIE_UTL_PCIE_PORT_CONTROL 0x540
-#define PCIE_UTL_PCIE_PORT_STATUS 0x548
-#define PCIE_UTL_PCIE_PORT_ERROR_SEV 0x550
-#define PCIE_UTL_PCIE_PORT_IRQ_EN 0x558
-#define PCIE_UTL_RC_STATUS 0x560
-#define PCIE_UTL_RC_ERR_SEVERITY 0x568
-#define PCIE_UTL_RC_IRQ_EN 0x570
-#define PCIE_UTL_EP_STATUS 0x578
-#define PCIE_UTL_EP_ERR_SEVERITY 0x580
-#define PCIE_UTL_EP_ERR_IRQ_EN 0x588
-
-#define PCIE_UTL_PCI_PM_CTRL1 0x590
-#define PCIE_UTL_PCI_PM_CTRL2 0x598
-
-/* PCIe stack registers */
-#define PCIE_REG_SYSTEM_CONFIG1 0x600
-#define PCIE_REG_SYSTEM_CONFIG2 0x608
-#define PCIE_REG_EP_SYSTEM_CONFIG 0x618
-#define PCIE_REG_EP_FLR 0x620
-#define PCIE_REG_EP_BAR_CONFIG 0x628
-#define PCIE_REG_LINK_CONFIG 0x630
-#define PCIE_REG_PM_CONFIG 0x640
-#define PCIE_REG_DLP_CONTROL 0x650
-#define PCIE_REG_DLP_STATUS 0x658
-#define PCIE_REG_ERR_REPORT_CONTROL 0x660
-#define PCIE_REG_SLOT_CONTROL1 0x670
-#define PCIE_REG_SLOT_CONTROL2 0x678
-#define PCIE_REG_UTL_CONFIG 0x680
-#define PCIE_REG_BUFFERS_CONFIG 0x690
-#define PCIE_REG_ERROR_INJECT 0x698
-#define PCIE_REG_SRIOV_CONFIG 0x6a0
-#define PCIE_REG_PF0_SRIOV_STATUS 0x6a8
-#define PCIE_REG_PF1_SRIOV_STATUS 0x6b0
-#define PCIE_REG_PORT_NUMBER 0x700
-#define PCIE_REG_POR_SYSTEM_CONFIG 0x708
-
-/* PHB internal logic registers */
-#define PCIE_REG_PHB_VERSION 0x800
-#define PCIE_REG_RESET 0x808
-#define PCIE_REG_PHB_CONTROL 0x810
-#define PCIE_REG_PHB_TIMEOUT_CONTROL1 0x878
-#define PCIE_REG_PHB_QUIESCE_DMA 0x888
-#define PCIE_REG_PHB_DMA_READ_TAG_ACTV 0x900
-#define PCIE_REG_PHB_TCE_READ_TAG_ACTV 0x908
-
-/* FIR registers */
-#define PCIE_REG_LEM_FIR_ACCUM 0xc00
-#define PCIE_REG_LEM_FIR_AND_MASK 0xc08
-#define PCIE_REG_LEM_FIR_OR_MASK 0xc10
-#define PCIE_REG_LEM_ACTION0 0xc18
-#define PCIE_REG_LEM_ACTION1 0xc20
-#define PCIE_REG_LEM_ERROR_MASK 0xc30
-#define PCIE_REG_LEM_ERROR_AND_MASK 0xc38
-#define PCIE_REG_LEM_ERROR_OR_MASK 0xc40
-
-/* PHB Error registers */
-#define PCIE_REG_PHB_ERR_STATUS 0xc80
-#define PCIE_REG_PHB_ERR1_STATUS 0xc88
-#define PCIE_REG_PHB_ERR_INJECT 0xc90
-#define PCIE_REG_PHB_ERR_LEM_ENABLE 0xc98
-#define PCIE_REG_PHB_ERR_IRQ_ENABLE 0xca0
-#define PCIE_REG_PHB_ERR_FREEZE_ENABLE 0xca8
-#define PCIE_REG_PHB_ERR_SIDE_ENABLE 0xcb8
-#define PCIE_REG_PHB_ERR_LOG_0 0xcc0
-#define PCIE_REG_PHB_ERR_LOG_1 0xcc8
-#define PCIE_REG_PHB_ERR_STATUS_MASK 0xcd0
-#define PCIE_REG_PHB_ERR1_STATUS_MASK 0xcd8
-
-#define PCIE_REG_MMIO_ERR_STATUS 0xd00
-#define PCIE_REG_MMIO_ERR1_STATUS 0xd08
-#define PCIE_REG_MMIO_ERR_INJECT 0xd10
-#define PCIE_REG_MMIO_ERR_LEM_ENABLE 0xd18
-#define PCIE_REG_MMIO_ERR_IRQ_ENABLE 0xd20
-#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE 0xd28
-#define PCIE_REG_MMIO_ERR_SIDE_ENABLE 0xd38
-#define PCIE_REG_MMIO_ERR_LOG_0 0xd40
-#define PCIE_REG_MMIO_ERR_LOG_1 0xd48
-#define PCIE_REG_MMIO_ERR_STATUS_MASK 0xd50
-#define PCIE_REG_MMIO_ERR1_STATUS_MASK 0xd58
-
-#define PCIE_REG_DMA_ERR_STATUS 0xd80
-#define PCIE_REG_DMA_ERR1_STATUS 0xd88
-#define PCIE_REG_DMA_ERR_INJECT 0xd90
-#define PCIE_REG_DMA_ERR_LEM_ENABLE 0xd98
-#define PCIE_REG_DMA_ERR_IRQ_ENABLE 0xda0
-#define PCIE_REG_DMA_ERR_FREEZE_ENABLE 0xda8
-#define PCIE_REG_DMA_ERR_SIDE_ENABLE 0xdb8
-#define PCIE_REG_DMA_ERR_LOG_0 0xdc0
-#define PCIE_REG_DMA_ERR_LOG_1 0xdc8
-#define PCIE_REG_DMA_ERR_STATUS_MASK 0xdd0
-#define PCIE_REG_DMA_ERR1_STATUS_MASK 0xdd8
-
-/* Shortcuts for access to the above using the PHB definitions
- * with an offset
- */
-#define PCIE_REG_ERR_PHB_OFFSET 0x0
-#define PCIE_REG_ERR_MMIO_OFFSET 0x80
-#define PCIE_REG_ERR_DMA_OFFSET 0x100
-
-/* Debug and Trace registers */
-#define PCIE_REG_PHB_DEBUG_CONTROL0 0xe00
-#define PCIE_REG_PHB_DEBUG_STATUS0 0xe08
-#define PCIE_REG_PHB_DEBUG_CONTROL1 0xe10
-#define PCIE_REG_PHB_DEBUG_STATUS1 0xe18
-#define PCIE_REG_PHB_DEBUG_CONTROL2 0xe20
-#define PCIE_REG_PHB_DEBUG_STATUS2 0xe28
-#define PCIE_REG_PHB_DEBUG_CONTROL3 0xe30
-#define PCIE_REG_PHB_DEBUG_STATUS3 0xe38
-#define PCIE_REG_PHB_DEBUG_CONTROL4 0xe40
-#define PCIE_REG_PHB_DEBUG_STATUS4 0xe48
-#define PCIE_REG_PHB_DEBUG_CONTROL5 0xe50
-#define PCIE_REG_PHB_DEBUG_STATUS5 0xe58
-#define PCIE_REG_PHB_DEBUG_CONTROL6 0xe60
-#define PCIE_REG_PHB_DEBUG_STATUS6 0xe68
-
-/* Definition for PCIe errors */
-struct wsp_pcie_err_log_data {
- __u64 phb_err;
- __u64 phb_err1;
- __u64 phb_log0;
- __u64 phb_log1;
- __u64 mmio_err;
- __u64 mmio_err1;
- __u64 mmio_log0;
- __u64 mmio_log1;
- __u64 dma_err;
- __u64 dma_err1;
- __u64 dma_log0;
- __u64 dma_log1;
- __u64 utl_sys_err;
- __u64 utl_port_err;
- __u64 utl_rc_err;
- __u64 unused;
-};
-
-#endif /* __WSP_PCI_H */
--
1.9.1
More information about the Linuxppc-dev
mailing list