[PATCH v2 0/2] Support of the kmcoge4 board

[Valentin Longchamp]

This series adds support for Keymile's COGE4 board, called kmcoge4. This
board is the reference design for further designs at Keymile around the
P2040/P2041 SoCs from Freescale. This reference design is internally
called kmp204x.

Changes in v2:
- add a patch so that the Zarlink vendor prefix is defined
- add some nodes on the localbus CS when possible
- only use the corenet_generic machine and add kmcoge4 to the supported
  boards instead of defining a new kmp204x machine
- set better and more precise device nodes for the spi devices
- remove the partion layout for the spi_flash at 0

Valentin Longchamp (2):
  devicetree: bindings: add Zarlink to the vendor prefixes
  powerpc/mpc85xx: add support for Keymile's kmcoge4 board

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/powerpc/boot/dts/kmcoge4.dts                  | 161 +++++++++++++++
 arch/powerpc/configs/85xx/kmp204x_defconfig        | 227 +++++++++++++++++++++
 arch/powerpc/platforms/85xx/Kconfig                |   2 +-
 arch/powerpc/platforms/85xx/corenet_generic.c      |   3 +-
 5 files changed, 392 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/kmcoge4.dts
 create mode 100644 arch/powerpc/configs/85xx/kmp204x_defconfig

-- 
1.8.0.1