[PATCH] [v2] power/fsl: add MDIO dt binding for FMan

Scott Wood scottwood at freescale.com
Tue Dec 23 19:08:05 AEDT 2014


On Tue, 2014-12-23 at 01:35 -0600, Xie Shaohui-B21989 wrote:
> +- bus-frequency
> +		Usage: optional
> +		Value type: <u32>
> +		Definition: Specifies external MDIO bus clock speed which is
> +		different from MDIO standard 2.5MHz. Should be defined for SoCs
> +		on which the standard one cannot work.
> 
> What should I rephrase it? Replace the last sentence with "Should be defined
> For SoCs on which a lower frequency than the standard is required."?

Neither of these work with Emil's scenario of a system that allows a
faster-than-standard speed.

How about: "Definition: Specifies the external MDIO bus clock speed to
be used, if different from the standard 2.5 MHz.  This may be due to the
standard speed being unsupported (e.g. due to a hardware problem), or to
advertise that all relevant components in the system support a faster
speed."

> How about the value used in example?
> Should 2.5MHz be used or a lower one?

If you don't have a realistic example to use, don't put it in the
example at all.  2.5MHz is the worst example to use because that's the
default and there'd be no reason to use the property at all.

-Scott




More information about the Linuxppc-dev mailing list