[RFC PATCH 11/20] MIPS/Octeon/MSI: Use msi_chip instead of arch func to configure MSI/MSI-X
Yijing Wang
wangyijing at huawei.com
Tue Aug 12 17:26:04 EST 2014
Introduce a new struct msi_chip octeon_msi_chip instead of weak arch
functions to configure MSI/MSI-X.
Signed-off-by: Yijing Wang <wangyijing at huawei.com>
---
arch/mips/pci/msi-octeon.c | 45 ++++++++++++++++++-------------------------
1 files changed, 19 insertions(+), 26 deletions(-)
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index ab0c5d1..8098066 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
*
* Returns 0 on success.
*/
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int octeon_setup_msi_irq(struct device *dev, struct msi_desc *desc)
{
struct msi_msg msg;
u16 control;
@@ -73,7 +73,7 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
* wants. Most devices only want 1, which will give
* configured_private_bits and request_private_bits equal 0.
*/
- pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+ pci_read_config_word(to_pci_dev(dev), desc->msi_attrib.pos + PCI_MSI_FLAGS,
&control);
/*
@@ -176,7 +176,7 @@ msi_irq_allocated:
/* Update the number of IRQs the device has available to it */
control &= ~PCI_MSI_FLAGS_QSIZE;
control |= request_private_bits << 4;
- pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+ pci_write_config_word(to_pci_dev(dev), desc->msi_attrib.pos + PCI_MSI_FLAGS,
control);
irq_set_msi_desc(irq, desc);
@@ -184,32 +184,14 @@ msi_irq_allocated:
return 0;
}
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int octeon_check_msi_device(struct device *dev, int nvec, int type)
{
- struct msi_desc *entry;
- int ret;
-
/*
* MSI-X is not supported.
*/
if (type == PCI_CAP_ID_MSIX)
return -EINVAL;
- /*
- * If an architecture wants to support multiple MSI, it needs to
- * override arch_setup_msi_irqs()
- */
- if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- ret = arch_setup_msi_irq(dev, entry);
- if (ret < 0)
- return ret;
- if (ret > 0)
- return -ENOSPC;
- }
-
return 0;
}
@@ -219,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
*
* @irq: The devices first irq number. There may be multple in sequence.
*/
-void arch_teardown_msi_irq(unsigned int irq)
+void octeon_teardown_msi_irq(unsigned int irq)
{
int number_irqs;
u64 bitmask;
@@ -229,7 +211,7 @@ void arch_teardown_msi_irq(unsigned int irq)
if ((irq < OCTEON_IRQ_MSI_BIT0)
|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
panic("arch_teardown_msi_irq: Attempted to teardown illegal "
- "MSI interrupt (%d)", irq);
+ "MSI interrupt (%d)", irq);
irq -= OCTEON_IRQ_MSI_BIT0;
index = irq / 64;
@@ -242,7 +224,7 @@ void arch_teardown_msi_irq(unsigned int irq)
*/
number_irqs = 0;
while ((irq0 + number_irqs < 64) &&
- (msi_multiple_irq_bitmask[index]
+ (msi_multiple_irq_bitmask[index]
& (1ull << (irq0 + number_irqs))))
number_irqs++;
number_irqs++;
@@ -252,7 +234,7 @@ void arch_teardown_msi_irq(unsigned int irq)
bitmask <<= irq0;
if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
panic("arch_teardown_msi_irq: Attempted to teardown MSI "
- "interrupt (%d) not in use", irq);
+ "interrupt (%d) not in use", irq);
/* Checks are done, update the in use bitmask */
spin_lock(&msi_free_irq_bitmask_lock);
@@ -261,6 +243,17 @@ void arch_teardown_msi_irq(unsigned int irq)
spin_unlock(&msi_free_irq_bitmask_lock);
}
+struct msi_chip octeon_msi_chip = {
+ .setup_irq = octeon_setup_msi_irq,
+ .teardown_irq = octeon_teardown_msi_irq,
+ .check_device = octeon_check_msi_device,
+};
+
+struct msi_chip *arch_get_match_msi_chip(struct device *dev)
+{
+ return &octeon_msi_chip;
+}
+
static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
static u64 msi_rcv_reg[4];
--
1.7.1
More information about the Linuxppc-dev
mailing list