[PATCH] powerpc/powernv: Fix IOMMU group lost
Gavin Shan
gwshan at linux.vnet.ibm.com
Wed Aug 6 12:48:37 EST 2014
On Wed, Aug 06, 2014 at 12:06:04PM +1000, Gavin Shan wrote:
>On Wed, Aug 06, 2014 at 12:03:23AM +0800, Wei Yang wrote:
>>I just give a shot with patch on PHB3 with hotplug case. From the functional
>>point of view, it works. The iommu group is created and attached with device.
>>While it still has the problem we had which commit 3f28c5a tried to solve.
>>
>>In the test case, the pci bus is not removed. This means in
>>pcibios_add_device(), it will try to add iommu group since the
>>pci_bus->is_added is true. And at this moment the pci_dev->kobj->sd is not
>>initialized properly. This makes the iommu_add_device() fail.
>>
>
>Yes, it's expected behaviour. I'll remove the PCI bus notifier
>where we try to add IOMMU group, but fail eventually since
>pdev->dev->kobj->sd isn't populated. This mechanism isn't taking
>effect in full/partial hotplug cases. It would be separate fix,
>I guess.
>
Rechecked the code for a bit, the notifier can't be removed as
some partial hotplug cases still rely on it to create IOMMU group
if parent bus won't be scanned. However, we can add one more
condition in iommu_add_device() to avoid the problem:
if (!device_is_registered(dev))
return -ENOENT;
I'll add the condition and send out v2 out.
Thanks,
Gavin
>>Your patch delete the warning at this place, so from the log it looks good. But
>>actually, it is not that clear to address the problem. We still have two
>>problems:
>> 1. iommu group will fail to be created
>> 2. iommu group will be created multiple times
>>
>
>IOMMU group won't fail to be created since we have the condition:
>If the IOMMU group (for one specific PCI device) has been created,
>we simply bail without warning messages.
>
>The problem (2) could be resolved by remove the PCI bus notifier.
>And it should fail if we try add IOMMU group for PCI device who
>had attached IOMMU group.
>
>>My opinion is to make a clear understanding of the order/sequence of the iommu
>>group creation in both pci bus removed/not removed cases, than create and
>>attach it properly.
>>
>
>Please take a look on the function calls listed in the commit log.
>For full hotplug case, IOMMU group is attached at (C). For partial
>hotplug case (your test case), IOMMU group is bound at (A).
>
>Thanks,
>Gavin
>
>>On Tue, Aug 05, 2014 at 06:27:38PM +1000, Gavin Shan wrote:
>>>When we take full hotplug to recover from EEH errors, PCI buses
>>>could be involved. For the case, the child devices of involved
>>>PCI buses can't be attached to IOMMU group properly, which is
>>>caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of
>>>iommu_add_device()").
>>>
>>>When adding the PCI devices of the newly created PCI buses to
>>>the system, the IOMMU group is expected to be added in (C).
>>>(A) fails to bind the IOMMU group because bus->is_added is
>>>false. (B) fails because the device doesn't have binding IOMMU
>>>table yet. bus->is_added is set to true at end of (C) and
>>>pdev->is_added is set to true at (D).
>>>
>>> pcibios_add_pci_devices()
>>> pci_scan_bridge()
>>> pci_scan_child_bus()
>>> pci_scan_slot()
>>> pci_scan_single_device()
>>> pci_scan_device()
>>> pci_device_add()
>>> pcibios_add_device() A: Ignore
>>> device_add() B: Ignore
>>> pcibios_fixup_bus()
>>> pcibios_setup_bus_devices()
>>> pcibios_setup_device() C: Hit
>>> pcibios_finish_adding_to_bus()
>>> pci_bus_add_devices()
>>> pci_bus_add_device() D: Add device
>>>
>>>If the parent PCI bus isn't involved in hotplug, the IOMMU
>>>group is expected to be bound in (A).
>>>
>>>The patch fixes the issue by reverting commit 3f28c5a and remove
>>>WARN_ON() in iommu_add_device() to allow calling the function
>>>even the specified device already has associated IOMMU group.
>>>
>>>Cc: <stable at vger.kernel.org> # 3.16+
>>>Reported-by: Thadeu Lima de Souza Cascardo <cascardo at linux.vnet.ibm.com>
>>>Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
>>>Tested-by: Wei Yang <weiyang at linux.vnet.ibm.com>
>>>---
>>> arch/powerpc/kernel/iommu.c | 30 +++++++++++++-----------------
>>> arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
>>> 2 files changed, 14 insertions(+), 18 deletions(-)
>>>
>>>diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
>>>index 88e3ec6..4663c10 100644
>>>--- a/arch/powerpc/kernel/iommu.c
>>>+++ b/arch/powerpc/kernel/iommu.c
>>>@@ -1120,37 +1120,33 @@ EXPORT_SYMBOL_GPL(iommu_release_ownership);
>>> int iommu_add_device(struct device *dev)
>>> {
>>> struct iommu_table *tbl;
>>>- int ret = 0;
>>>
>>>- if (WARN_ON(dev->iommu_group)) {
>>>- pr_warn("iommu_tce: device %s is already in iommu group %d, skipping\n",
>>>- dev_name(dev),
>>>- iommu_group_id(dev->iommu_group));
>>>+ if (dev->iommu_group) {
>>>+ pr_debug("%s: Skipping device %s with iommu group %d\n",
>>>+ __func__, dev_name(dev),
>>>+ iommu_group_id(dev->iommu_group));
>>> return -EBUSY;
>>> }
>>>
>>> tbl = get_iommu_table_base(dev);
>>> if (!tbl || !tbl->it_group) {
>>>- pr_debug("iommu_tce: skipping device %s with no tbl\n",
>>>- dev_name(dev));
>>>+ pr_debug("%s: Skipping device %s with no tbl\n",
>>>+ __func__, dev_name(dev));
>>> return 0;
>>> }
>>>
>>>- pr_debug("iommu_tce: adding %s to iommu group %d\n",
>>>- dev_name(dev), iommu_group_id(tbl->it_group));
>>>+ pr_debug("%s: Adding %s to iommu group %d\n",
>>>+ __func__, dev_name(dev),
>>>+ iommu_group_id(tbl->it_group));
>>>
>>> if (PAGE_SIZE < IOMMU_PAGE_SIZE(tbl)) {
>>>- pr_err("iommu_tce: unsupported iommu page size.");
>>>- pr_err("%s has not been added\n", dev_name(dev));
>>>+ pr_err("%s: Invalid IOMMU page size %lx (%lx) on %s\n",
>>>+ __func__, IOMMU_PAGE_SIZE(tbl),
>>>+ PAGE_SIZE, dev_name(dev));
>>> return -EINVAL;
>>> }
>>>
>>>- ret = iommu_group_add_device(tbl->it_group, dev);
>>>- if (ret < 0)
>>>- pr_err("iommu_tce: %s has not been added, ret=%d\n",
>>>- dev_name(dev), ret);
>>>-
>>>- return ret;
>>>+ return iommu_group_add_device(tbl->it_group, dev);
>>> }
>>> EXPORT_SYMBOL_GPL(iommu_add_device);
>>>
>>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>>>index de19ede..86290eb 100644
>>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>>@@ -462,7 +462,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
>>>
>>> pe = &phb->ioda.pe_array[pdn->pe_number];
>>> WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
>>>- set_iommu_table_base(&pdev->dev, &pe->tce32_table);
>>>+ set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
>>> }
>>>
>>> static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
>>>--
>>>1.8.3.2
>>
>>--
>>Richard Yang
>>Help you, Help me
More information about the Linuxppc-dev
mailing list