spi, spi_fsl-spi.c not working?

[Scott Wood]

On Thu, 2014-07-17 at 11:11 +0200, Heiko Schocher wrote:
> Hello all,
> 
> I just tried a mpc83xx based board (similiar to the mpc8313erdb)
> with linux v3.16-rc4 using the drivers/spi/spi-fsl-spi.c driver.
> DT nodes for spi are the same as in arch/powerpc/boot/dts/mpc8313erdb.dts:
> 
>                  spi at 7000 {
>                          cell-index = <0>;
>                          compatible = "fsl,spi";
>                          reg = <0x7000 0x1000>;
>                          interrupts = <16 0x8>;
>                          interrupt-parent = <&ipic>;
>                          mode = "cpu";
>                  };
> 
> Bootlog shows:
> 
> [    1.341411] fsl_spi f0007000.spi: master is unqueued, this is deprecated
> [    1.554405] ------------[ cut here ]------------
> [    1.559080] WARNING: at c023a958 [verbose debug info unavailable]

If you haven't already resolved this, could you enable verbose debug
info (or use gdb) to get the line number?

I don't see the WARNING when booting mpc8379rdb with SPI enabled (though
I do see the "master is unqueued" message).  I don't have easy access to
an mpc8313erdb to test on.

-Scott