[PATCH] powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY

[Liu Shengzhou-B36685]

> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Friday, September 27, 2013 5:12 AM
> To: Liu Shengzhou-B36685
> Cc: Wood Scott-B07421; linuxppc-dev at lists.ozlabs.org; galak at kernel.crashing.org
> Subject: Re: [PATCH] powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY
> 
> On Wed, 2013-09-25 at 22:02 -0500, Liu Shengzhou-B36685 wrote:
> > > -----Original Message-----
> > > From: Wood Scott-B07421
> > > Sent: Thursday, September 26, 2013 9:24 AM
> > > To: Liu Shengzhou-B36685
> > > Cc: linuxppc-dev at lists.ozlabs.org; galak at kernel.crashing.org
> > > Subject: Re: [PATCH] powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY
> > >
> > > On Tue, 2013-09-03 at 16:28 +0800, Shengzhou Liu wrote:
> > > > Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.
> > > >
> > > > Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> > > > ---
> > > >  arch/powerpc/configs/corenet32_smp_defconfig |    1 +
> > > >  arch/powerpc/configs/mpc85xx_defconfig       |    1 +
> > > >  arch/powerpc/configs/mpc85xx_smp_defconfig   |    1 +
> > > >  3 files changed, 3 insertions(+), 0 deletions(-)
> > >
> > > Why not corenet64_smp_defconfig?  Which boards have this PHY?
> > >
> > > -Scott
> > >
> > Currently AT803X exists on P1010RDB, P1025TWR, etc.
> > It seems we don't use AT803X for those boards of corenet64.
> 
> Neither of those boards are corenet32 either.
> 
Generally, we use AT803X as low-cost solution, it's possible to use it on P1/P2/P3 serial, corenet64 is for high-end case, that's why I didn't enable it for corenet64.
-Shengzhou