[PATCH v3] powerpc/p1010rdb-pb:make a new dts for p1010rdb-pb

[Liu Shengzhou-B36685]

> -----Original Message-----
> From: Zhao Qiang-B45475
> Sent: Wednesday, September 18, 2013 12:55 PM
> To: linuxppc-dev at lists.ozlabs.org
> Cc: Zhao Qiang-B45475; Liu Shengzhou-B36685
> Subject: [PATCH v3] powerpc/p1010rdb-pb:make a new dts for p1010rdb-pb
> 
> P1010RDB-PA and P1010RDB-PB boards use different external PHY interrupt signals.
> So make a new dts for P1010RDB-PB.
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> Signed-off-by: Zhao Qiang <B45475 at freescale.com>
> ---
> Changes for v2:
> 	-Remove phy interrupts for p1010rdb-pb
> Changes for v3:
> 	-Maintain the phy interrupts p1010rdb-pa and make a new device
> 	tree for p1010rdb-pb
> 
>  arch/powerpc/boot/dts/p1010rdb-pa.dtsi | 11 ++++++
> arch/powerpc/boot/dts/p1010rdb-pb.dts  | 67 ++++++++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/p1010rdb-pb.dtsi | 11 ++++++
>  arch/powerpc/boot/dts/p1010rdb.dts     |  1 +
>  arch/powerpc/boot/dts/p1010rdb.dtsi    |  3 --
>  arch/powerpc/platforms/85xx/p1010rdb.c | 29 +++++++++++++++
>  6 files changed, 119 insertions(+), 3 deletions(-)  create mode 100644
> arch/powerpc/boot/dts/p1010rdb-pa.dtsi
>  create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dts
>  create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dtsi
> 

Don't touch p1010rdb.c, create two p1010rdb-pa.dts and p1010rdb-pb.dts, which include the common p1010rdb.dtsi.
Combine original p1010rdb.dts and p1010rdb.dtsi into new p1010rdb.dtsi with removing compatible part.
Place phy node and following part in p1010rdb-pa.dts and p1010rdb-pb.dts.
/ {
        model = "fsl,P1010RDB-PA";
        compatible = "fsl,P1010RDB";
  }

/ {
        model = "fsl,P1010RDB-PB";
        compatible = "fsl,P1010RDB";
  }

-Shengzhou