[PATCH v4] powerpc/mpc85xx: Update the clock device tree nodes

[Scott Wood]

On Wed, 2013-09-11 at 14:57 +0800, Yuantian.Tang at freescale.com wrote:
> From: Tang Yuantian <yuantian.tang at freescale.com>
> 
> The following SoCs will be affected: p2041, p3041, p4080,
> p5020, p5040, b4420, b4860, t4240
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>
> ---
> v4:
> 	- add binding document
> 	- update compatible string
> 	- update the reg property
> v3:
> 	- fix typo
> v2:
> 	- add t4240, b4420, b4860 support
> 	- remove pll/4 clock from p2041, p3041 and p5020 board
> 
>  .../devicetree/bindings/clock/corenet-clock.txt    |  80 +++++++++++++++
>  arch/powerpc/boot/dts/fsl/b4420si-post.dtsi        |  34 ++++++-
>  arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi         |   2 +
>  arch/powerpc/boot/dts/fsl/b4860si-post.dtsi        |  34 ++++++-
>  arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi         |   4 +
>  arch/powerpc/boot/dts/fsl/p2041si-post.dtsi        |  59 ++++++++++-
>  arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi         |   4 +
>  arch/powerpc/boot/dts/fsl/p3041si-post.dtsi        |  59 ++++++++++-
>  arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi         |   4 +
>  arch/powerpc/boot/dts/fsl/p4080si-post.dtsi        | 111 ++++++++++++++++++++-
>  arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi         |   8 ++
>  arch/powerpc/boot/dts/fsl/p5020si-post.dtsi        |  41 +++++++-
>  arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi         |   2 +
>  arch/powerpc/boot/dts/fsl/p5040si-post.dtsi        |  59 ++++++++++-
>  arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi         |   4 +
>  arch/powerpc/boot/dts/fsl/t4240si-post.dtsi        |  84 +++++++++++++++-
>  arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi         |  12 +++
>  17 files changed, 593 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/corenet-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt
> new file mode 100644
> index 0000000..51eab75
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt
> @@ -0,0 +1,80 @@
> +Device Tree Clock bindings for Freescale PowerPC corenet platform
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be one or more of the following:

Shall include...

> +	- "fsl,<chip>-clockgen": for chip specific clock block
> +	- "fsl,qoriq-clockgen-[1,2].0": for chassis 1.0 and 2.0 clock
> +		block respectively.
> +	- "fsl,qoriq-chassis[1,2]-core-pll" - for a core PLL clock
> +	- "fsl,qoriq-chassis[1,2]-core-mux" - for a core multiplexer clock.
> +		Divided from the core PLL clock

Hmm, there's a bit of a mismatch here between "chassis2" and the "2.0"
on the clockgen node... perhaps it should be "fsl,qoriq-core-pll-2.0",
etc.

> +	- "fixed-clock" - from common clock binding; should be output clock
> +		of oscillator
> +- reg : shall be the control register offset from clock block base address.

This description of "reg" is overly specific (assumes how the parent
node's ranges are set up), incomplete (there's a size as well as the
offset), and does not apply to the clockgen node itself (you probably
shouldn't lump them together like this).

> +- clocks : shall be the input parent clock phandle for the clock.

Not required on the clockgen node

-Scott