[PATCH] powerpc/p1010rdb:remove interrupts of ethernet-phy in device tree

[Zhao Qiang]

Since P1010RDB-PA and P1010RDB-PB boards use different external PHY
interrupt signals.
And actually the PHY interrupt is not used effectively with
corresponding interrupt handler.
So we can remove the interrupts node without side-effect to comply
with both P1010RDB-PA and P1010RDB-PB.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
Signed-off-by: Zhao Qiang <B45475 at freescale.com>
---
 arch/powerpc/boot/dts/p1010rdb.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 7fc3402..2433ae4 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -199,17 +199,14 @@
 
 	mdio at 24000 {
 		phy0: ethernet-phy at 0 {
-			interrupts = <3 1 0 0>;
 			reg = <0x1>;
 		};
 
 		phy1: ethernet-phy at 1 {
-			interrupts = <2 1 0 0>;
 			reg = <0x0>;
 		};
 
 		phy2: ethernet-phy at 2 {
-			interrupts = <2 1 0 0>;
 			reg = <0x2>;
 		};
 
-- 
1.8.0