[PATCH] powerpc/p1010rdb:update phy node in dts

[Kumar Gala]

On Sep 10, 2013, at 12:50 AM, Zhao Qiang wrote:

> Update phy node according to new P1010RDB-PB board.
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> Signed-off-by: Zhao Qiang <B45475 at freescale.com>
> ---
> arch/powerpc/boot/dts/p1010rdb.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)

What about the old boards?

- k

> 
> diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
> index 7fc3402..8c675bf 100644
> --- a/arch/powerpc/boot/dts/p1010rdb.dtsi
> +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
> @@ -199,7 +199,7 @@
> 
> 	mdio at 24000 {
> 		phy0: ethernet-phy at 0 {
> -			interrupts = <3 1 0 0>;
> +			interrupts = <0 1 0 0>;
> 			reg = <0x1>;
> 		};
> 
> @@ -209,7 +209,7 @@
> 		};
> 
> 		phy2: ethernet-phy at 2 {
> -			interrupts = <2 1 0 0>;
> +			interrupts = <1 1 0 0>;
> 			reg = <0x2>;
> 		};
> 
> -- 
> 1.8.0
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev