[PATCH] powerpc: OE=1 Form Instructions Not Decoded Correctly

[Benjamin Herrenschmidt]

On Mon, 2013-09-09 at 08:35 +1000, Paul Mackerras wrote:
> On Fri, Sep 06, 2013 at 10:13:00AM -0500, Tom Musta wrote:
> > To: linuxppc-dev at lists.ozlabs.org
> > Subject: [PATCH] powerpc: OE=1 Form Instructions Not Decoded Correctly
> > From: Tom Musta <tommusta at gmail.com>
> > 
> > PowerISA uses instruction bit 21 to indicate that the overflow (OV) bit
> > of the XER is to be set, as well as its corresponding sticky bit (SO).
> > This patch addresses two defects in the implementation of the PowerISA
> > single step code for this category of instructions:  (a) the OE=1 case
> > is not correctly accounted for in the case statement for the extended
> > opcode handling.  (b) the implementation is not setting XER[OV] and
> > XER[SO].
> 
> Are you seeing any actual problems arising from the OE=1 instructions
> not being emulated?  This code was designed primarily for emulating
> instructions in the kernel, which is written in C, and the C compiler
> doesn't emit OE=1 instructions -- or at least it didn't in the past.
> So, does the impetus for this change come because the C compiler is
> now emitting these instructions, or because this code is being used on
> non-kernel instructions, or just for completeness?  Your patch
> description needs to include answers to these kinds of questions.

Isn't that code occasionally used with uprobes too nowadays  ?

Cheers,
Ben.

> Also, you need to indent your code correctly according to
> Documentation/CodingStyle.
> 
> Paul.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev