[PATCH 1/2] tty/hvc_console: Add DTR/RTS callback to handle HUPCL control

[Benjamin Herrenschmidt]

On Tue, 2013-10-15 at 17:36 +0200, Hendrik Brueckner wrote:
> Hi Benjamin,
> 
> On Sat, Oct 12, 2013 at 07:43:24AM +1100, Benjamin Herrenschmidt wrote:
> > On Fri, 2013-10-11 at 14:47 +0200, Hendrik Brueckner wrote:
> > > The tiocmget/tiocmset callbacks are used to set and get modem status and
> > > triggered through an tty ioctl.
> > > 
> > > The dtr_rts() callback is different and it is used for DTS/RTS handshaking
> > > between the hvc_console (or any other tty_port) and the tty layer.  The tty
> > > port layer uses this callback to signal the hvc_console whether to raise or
> > > lower the DTR/RTS lines.  This is different than the ioctl interface to
> > > controls the modem status.
> > 
> > Well, DTR at least is the same via both callbacks... Also normal handshaking
> > is normally RTS/CTS, only some HW setups "hijacks" DTR for RTS (old Macs come
> > to mind).
> 
> Yep. DTR is changed in both callbacks but from different layers.  The
> tiocmget/tiocmset are triggered through the ioctl.  The dtr_rts() callback is
> called in hvc_close() to properly handle HUPCL to lower modem control lines
> after last process closes the device (hang up).
> 
> This is also done in the hvsilib_close() in hvsi_lib.c:
> 
> 	/* Clear our own DTR */
> 	if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL))
> 		hvsilib_write_mctrl(pv, 0); 
> 
> This is actually what the dtr_rts() callback should trigger and I wonder
> whether it would be worth to introduce the dtr_rts() callback to encapsulate
> the "hvsilib_write_mctrl(pv, 0);" call from above.
> 
> On the other hand, the dtr_rts() callback is a good encapsulation to not
> directly access the hp->tty to potentially prevent a layering violation. At
> least for the hvc_iucv() I do not want to deal with the "underlying" tty layer
> and introduce additional reference accounting.
> 
> I hope this helps you to understand my rational for introducing the dtr_rts()
> callback.

I'm not sure :) We still end up basically with 2 callbacks to do the
same thing ... change the DTR line. It's odd at best, I still don't
quite see why hvc_console couldn't just use mctrl...

Cheers,
Ben.