[PATCH 1/3] gianfar: Enable eTSEC-A002 erratum w/a for all parts

[David Miller]

From: Claudiu Manoil <claudiu.manoil at freescale.com>
Date: Wed, 9 Oct 2013 20:20:40 +0300

> A002 is still in "no plans to fix" state, and applies to all
> the current P1/P2 parts as well, so it's resonable to enable
> its workaround by default, for all the soc's with etsec.
> The impact of not enabling this workaround for affected parts
> is that under certain conditons (runt frames or even frames
> with RX error detected at PHY level) during controller reset,
> the controller might fail to indicate Rx reset (GRS) completion.
> 
> Signed-off-by: Claudiu Manoil <claudiu.manoil at freescale.com>

Applied.