[PATCH 1/2][v7] powerpc/mpc85xx:Add initial device tree support of T104x

[Scott Wood]

On Tue, 2013-10-01 at 08:56 +0530, Prabhakar Kushwaha wrote:
> On 10/01/2013 01:17 AM, Scott Wood wrote:
> > On Mon, 2013-09-30 at 12:24 +0530, Prabhakar Kushwaha wrote:
> >>      - Removed l2switch. It will be added later
> > Why?
> 
> I am not aware of bindings required for l2switch as we are not working 
> on the driver.
> Earlier I thought of putting a place holder. but as you suggested to put 
> bindings in documentation.
> It will be good if it is put by actual driver owner.

Is there a reason to believe the binding will be complicated?

Does any such "driver owner" exist yet?


> >> +sata at 220000 {
> >> +			fsl,iommu-parent = <&pamu0>;
> >> +			fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
> >> +};
> >> +/include/ "qoriq-sata2-1.dtsi"
> >> +sata at 221000 {
> >> +			fsl,iommu-parent = <&pamu0>;
> >> +			fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
> >> +};
> > Whitespace
> 
> do we have any scripts which check for whitespace as checkpatch never 
> give any warning/error.
> it is a very silly mistake which I am doing continuously :(

checkpatch doesn't check dts files.

> >> +/include/ "t1040si-post.dtsi"
> > Should at least have a comment indicating that eventually this should
> > hold the l2 switch node.
> 
> yes. Ideally it should be.
> but if I put a comment then I believe this patch will not be completed. 
> it will think as a RFC.
> as I believe putting of TODO is generally for RFC patches.

As is, one would wonder why the separate file exists at all.

The TODO is there whether you have a comment acknowledging it or
not. :-)

-Scott