eth0: hw csum failure

Andreas Schwab schwab at linux-m68k.org
Sat Nov 23 11:44:00 EST 2013


I get a lot of "eth0: hw csum failure" with 3.13-rc1 on my G5.

eth0: hw csum failure
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1 #1
Call Trace:
[c00000000ffef1d0] [c00000000000f97c] .show_stack+0x60/0x14c (unreliable)
[c00000000ffef2a0] [c00000000069fad8] .dump_stack+0x80/0xa0
[c00000000ffef320] [c000000000552bc0] .netdev_rx_csum_fault+0x4c/0x58
[c00000000ffef3a0] [c000000000546f88] .__skb_checksum_complete_head+0x54/0x78
[c00000000ffef420] [c0000000005f1118] .nf_ip_checksum+0xf4/0x100
[c00000000ffef4b0] [c00000000058e520] .udp_error+0x198/0x210
[c00000000ffef560] [c000000000587694] .nf_conntrack_in+0x14c/0xa20
[c00000000ffef690] [c0000000005f195c] .ipv4_conntrack_in+0x24/0x38
[c00000000ffef700] [c00000000058343c] .nf_iterate+0x64/0xb4
[c00000000ffef7c0] [c00000000058353c] .nf_hook_slow+0xb0/0x188
[c00000000ffef890] [c00000000059ea9c] .ip_rcv+0x390/0x3f0
[c00000000ffef930] [c000000000551578] .__netif_receive_skb_core+0x8c4/0x964
[c00000000ffefa30] [c000000000551c38] .netif_receive_skb+0xb0/0x130
[c00000000ffefae0] [c000000000552740] .napi_gro_receive+0x50/0xc0
[c00000000ffefb60] [c000000000447754] .gem_poll+0x10f0/0x1328
[c00000000ffefcc0] [c000000000552418] .net_rx_action+0xd8/0x240
[c00000000ffefd90] [c00000000004dfc4] .__do_softirq+0x158/0x2c0
[c00000000ffefea0] [c00000000004e448] .irq_exit+0x6c/0xc4
[c00000000ffeff10] [c00000000000ce14] .__do_irq+0xec/0xf8
[c00000000ffeff90] [c000000000019474] .call_do_irq+0x14/0x24
[c0000001f615ba30] [c00000000000cea0] .do_IRQ+0x80/0xc0
[c0000001f615bac0] [c0000000000024b8] hardware_interrupt_common+0x138/0x180
--- Exception: 501 at .arch_cpu_idle+0x78/0x124
    LR = .arch_cpu_idle+0x78/0x124
[c0000001f615bdb0] [c0000000000a3af4] .rcu_idle_enter+0x98/0xb8 (unreliable)
[c0000001f615be30] [c00000000009a978] .cpu_startup_entry+0x110/0x1a0
[c0000001f615bee0] [c00000000001f14c] .start_secondary+0x288/0x290
[c0000001f615bf90] [c0000000000087fc] .start_secondary_prolog+0x10/0x14

Andreas.

-- 
Andreas Schwab, schwab at linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."


More information about the Linuxppc-dev mailing list