[PATCH 2/9] pseries: Add H_SET_MODE to change exception endianness
Michael Ellerman
mpe at ellerman.id.au
Thu Nov 21 22:51:04 EST 2013
On Wed, Nov 20, 2013 at 10:14:59PM +1100, Anton Blanchard wrote:
> On little endian builds call H_SET_MODE so exceptions have the
> correct endianness. We need to reset the endian during kexec
> so do that in the MMU hashtable clear callback.
>
> Signed-off-by: Anton Blanchard <anton at samba.org>
> ---
> arch/powerpc/include/asm/hvcall.h | 2 ++
> arch/powerpc/include/asm/plpar_wrappers.h | 26 +++++++++++++++++++
> arch/powerpc/platforms/pseries/lpar.c | 17 +++++++++++++
> arch/powerpc/platforms/pseries/setup.c | 42 +++++++++++++++++++++++++++++++
> 4 files changed, 87 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
> index 0c7f2bf..d8b600b 100644
> --- a/arch/powerpc/include/asm/hvcall.h
> +++ b/arch/powerpc/include/asm/hvcall.h
> @@ -403,6 +403,8 @@ static inline unsigned long cmo_get_page_size(void)
> extern long pSeries_enable_reloc_on_exc(void);
> extern long pSeries_disable_reloc_on_exc(void);
>
> +extern long pseries_big_endian_exceptions(void);
> +
> #else
>
> #define pSeries_enable_reloc_on_exc() do {} while (0)
> diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
> index a63b045..12c32c5 100644
> --- a/arch/powerpc/include/asm/plpar_wrappers.h
> +++ b/arch/powerpc/include/asm/plpar_wrappers.h
> @@ -287,6 +287,32 @@ static inline long disable_reloc_on_exceptions(void) {
> return plpar_set_mode(0, 3, 0, 0);
> }
>
> +/*
> + * Take exceptions in big endian mode on this partition
> + *
> + * Note: this call has a partition wide scope and can take a while to complete.
> + * If it returns H_LONG_BUSY_* it should be retried periodically until it
> + * returns H_SUCCESS.
> + */
> +static inline long enable_big_endian_exceptions(void)
> +{
> + /* mflags = 0: big endian exceptions */
> + return plpar_set_mode(0, 4, 0, 0);
> +}
> +
> +/*
> + * Take exceptions in little endian mode on this partition
> + *
> + * Note: this call has a partition wide scope and can take a while to complete.
> + * If it returns H_LONG_BUSY_* it should be retried periodically until it
> + * returns H_SUCCESS.
> + */
> +static inline long enable_little_endian_exceptions(void)
> +{
> + /* mflags = 1: little endian exceptions */
> + return plpar_set_mode(1, 4, 0, 0);
> +}
> +
...
> diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
> index 1f97e2b..c1f1908 100644
> --- a/arch/powerpc/platforms/pseries/setup.c
> +++ b/arch/powerpc/platforms/pseries/setup.c
> @@ -442,6 +442,32 @@ static void pSeries_machine_kexec(struct kimage *image)
> }
> #endif
Nit picking, but I'm not sure the enable_big/little_endian_exceptions()
wrappers buy us much. And they mean you end up with essentially the same
routine twice below:
> +#ifdef __LITTLE_ENDIAN__
> +long pseries_big_endian_exceptions(void)
> +{
> + long rc;
> +
> + while (1) {
> + rc = enable_big_endian_exceptions();
> + if (!H_IS_LONG_BUSY(rc))
> + return rc;
> + mdelay(get_longbusy_msecs(rc));
> + }
> +}
> +
> +static long pseries_little_endian_exceptions(void)
> +{
> + long rc;
> +
> + while (1) {
> + rc = enable_little_endian_exceptions();
> + if (!H_IS_LONG_BUSY(rc))
> + return rc;
> + mdelay(get_longbusy_msecs(rc));
> + }
> +}
> +#endif
Whereas you could do:
static long pseries_big_endian_exceptions(bool big_endian)
{
int mflags;
long rc;
mflags = big_endian ? 0 : 1;
while (1) {
rc = plpar_set_mode(mflags, 4, 0, 0);
if (!H_IS_LONG_BUSY(rc))
return rc;
mdelay(get_longbusy_msecs(rc));
}
}
Perhaps pseries_big_endian_exceptions(false) looks a bit odd though ..
cheers
More information about the Linuxppc-dev
mailing list