[PATCH v4 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script

[Nicolin Chen]

This patch adds a new DMA_TYPE for SSI dual FIFO script, included
in SDMA firmware version 2. This script would allow SSI use dual
fifo mode to transimit/receive data without occasional hardware
underrun/overrun.

Signed-off-by: Nicolin Chen <b42378 at freescale.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 drivers/dma/imx-sdma.c                                 | 4 ++++
 include/linux/platform_data/dma-imx.h                  | 1 +
 3 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 4fa814d..68b83ec 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -42,6 +42,7 @@ The full ID of peripheral types can be found below.
 	19	IPU Memory
 	20	ASRC
 	21	ESAI
+	22	SSI Dual FIFO	(needs firmware ver >= 2)
 
 The third cell specifies the transfer priority as below.
 
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index c7ece8d..efaa9a9 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -725,6 +725,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->mcu_2_app_addr;
 		break;
+	case IMX_DMATYPE_SSI_DUAL:
+		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
+		break;
 	case IMX_DMATYPE_SSI_SP:
 	case IMX_DMATYPE_MMC:
 	case IMX_DMATYPE_SDHC:
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index beac6b8..bcbc6c3 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -39,6 +39,7 @@ enum sdma_peripheral_type {
 	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
 	IMX_DMATYPE_ASRC,	/* ASRC */
 	IMX_DMATYPE_ESAI,	/* ESAI */
+	IMX_DMATYPE_SSI_DUAL,	/* SSI Dual FIFO */
 };
 
 enum imx_dma_prio {
-- 
1.8.4