[PATCH] powerpc: kvm: optimize "sc 0" as fast return

[Benjamin Herrenschmidt]

On Fri, 2013-11-08 at 15:05 +1100, Benjamin Herrenschmidt wrote:
> On Fri, 2013-11-08 at 04:10 +0100, Alexander Graf wrote:
> > On 08.11.2013, at 03:44, Liu Ping Fan <kernelfans at gmail.com> wrote:
> > 
> > > syscall is a very common behavior inside guest, and this patch
> > > optimizes the path for the emulation of BOOK3S_INTERRUPT_SYSCALL,
> > > so hypervisor can return to guest without heavy exit, i.e, no need
> > > to swap TLB, HTAB,.. etc
> > 
> > The syscall exit you touch here only happens when you do an sc > 0
> > with MSR_PR set inside the guest. The only case you realistically see
> > this is when you run PR KVM inside of an HV KVM guest.
> > 
> > I don't think we should optimize for that case. Instead, we should
> > rather try to not bounce to the 1st hypervisor in the first place in
> > that scenario :).
> 
> Well, so unfortunately openstack CI uses PR inside HV pretty
> heavily .... it *might* be worthwhile optimizing that path if the patch
> is simple enough... I'd make that Paul's call.

Note that this is a statement of value for the idea ... not the
implementation ;-) From a quick look with Paulus, the patch is quite
broken. I'll let Paul comment in details.

Cheers,
Ben.

> Cheers,
> Ben.
> 
> > 
> > Alex
> > 
> > > 
> > > Signed-off-by: Liu Ping Fan <pingfank at linux.vnet.ibm.com>
> > > ---
> > > Compiled, but lack of bare metal, I have not tested it yet.
> > > ---
> > > arch/powerpc/kvm/book3s_hv.c            |  6 ------
> > > arch/powerpc/kvm/book3s_hv_rmhandlers.S | 13 ++++++++++++-
> > > 2 files changed, 12 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/arch/powerpc/kvm/book3s_hv.c
> > b/arch/powerpc/kvm/book3s_hv.c
> > > index 62a2b5a..73dc852 100644
> > > --- a/arch/powerpc/kvm/book3s_hv.c
> > > +++ b/arch/powerpc/kvm/book3s_hv.c
> > > @@ -628,12 +628,6 @@ static int kvmppc_handle_exit(struct kvm_run
> > *run, struct kvm_vcpu *vcpu,
> > > 		/* hcall - punt to userspace */
> > > 		int i;
> > > 
> > > -		if (vcpu->arch.shregs.msr & MSR_PR) {
> > > -			/* sc 1 from userspace - reflect to guest syscall */
> > > -			kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_SYSCALL);
> > > -			r = RESUME_GUEST;
> > > -			break;
> > > -		}
> > > 		run->papr_hcall.nr = kvmppc_get_gpr(vcpu, 3);
> > > 		for (i = 0; i < 9; ++i)
> > > 			run->papr_hcall.args[i] = kvmppc_get_gpr(vcpu, 4 + i);
> > > diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> > b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> > > index c71103b..9f626c3 100644
> > > --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> > > +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> > > @@ -1388,7 +1388,8 @@ kvmppc_hisi:
> > > hcall_try_real_mode:
> > > 	ld	r3,VCPU_GPR(R3)(r9)
> > > 	andi.	r0,r11,MSR_PR
> > > -	bne	guest_exit_cont
> > > +	/* sc 1 from userspace - reflect to guest syscall */
> > > +	bne	sc_0_fast_return
> > > 	clrrdi	r3,r3,2
> > > 	cmpldi	r3,hcall_real_table_end - hcall_real_table
> > > 	bge	guest_exit_cont
> > > @@ -1409,6 +1410,16 @@ hcall_try_real_mode:
> > > 	ld	r11,VCPU_MSR(r4)
> > > 	b	fast_guest_return
> > > 
> > > +sc_0_fast_return:
> > > +	ld	r10,VCPU_PC(r9)
> > > +	ld	r11,VCPU_MSR(r9)
> > > +	mtspr	SPRN_SRR0,r10
> > > +	mtspr	SPRN_SRR1,r11
> > > +	li	r10, BOOK3S_INTERRUPT_SYSCALL
> > > +	LOAD_REG_IMMEDIATE(r3,0xffffffff87a0ffff)	/* zero 33:36,42:47 */
> > > +	and	r11,r11,r3
> > > +	b	fast_guest_return
> > > +
> > > 	/* We've attempted a real mode hcall, but it's punted it back
> > > 	 * to userspace.  We need to restore some clobbered volatiles
> > > 	 * before resuming the pass-it-to-qemu path */
> > > -- 
> > > 1.8.1.4
> > > 
>