[PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.
Nicolin Chen
b42378 at freescale.com
Fri Nov 1 19:59:05 EST 2013
Hi Xiubo,
On Fri, Nov 01, 2013 at 03:04:48PM +0800, Xiubo Li wrote:
> This adds Freescale SAI ASoC Audio support.
> This implementation is only compatible with device tree definition.
> Features:
> o Supports playback/capture
> o Supports 16/20/24 bit PCM
> o Supports 8k - 96k sample rates
> o Supports slave mode only.
>
Just for curiosity, I found there're quite a bit code actually support
I2S master mode such as set_sysclk() and register configuration to FMT
SND_SOC_DAIFMT_CBS_CFS.
Is that really "supports slave mode only"? Or just you haven't make
it properly work?
> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
> index b7ab71f..9a8851e 100644
> --- a/sound/soc/fsl/Kconfig
> +++ b/sound/soc/fsl/Kconfig
> @@ -213,3 +213,19 @@ config SND_SOC_IMX_MC13783
> select SND_SOC_IMX_PCM_DMA
>
> endif # SND_IMX_SOC
> +
> +menuconfig SND_FSL_SOC
> + tristate "SoC Audio for Freescale FSL CPUs"
> + help
> + Say Y or M if you want to add support for codecs attached to
> + the FSL CPUs.
> +
> + This will enable Freeacale SAI, SGT15000 codec.
> +
> +if SND_FSL_SOC
Why check this here? SAI should be a regular IP module which can be used by
other SoC as well. We would never know if next i.MX SoC won't contain SAI.
> +
> +config SND_SOC_FSL_SAI
> + tristate
> + select SND_SOC_GENERIC_DMAENGINE_PCM
I think you should keep SAI beside SSI/SPDIF directly.
> +
> +endif # SND_FSL_SOC
> diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
> index 8db705b..e5acc03 100644
> --- a/sound/soc/fsl/Makefile
> +++ b/sound/soc/fsl/Makefile
> @@ -56,3 +56,8 @@ obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
> obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
> obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
> obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
> +
> +# FSL ARM SAI/SGT15000 Platform Support
Should be SGTL5000, not SGT1. And SAI should not be used with SGTL5000 only,
it's a bit confusing to mention SGTL5000 here.
> +snd-soc-fsl-sai-objs := fsl-sai.o
And I think it should be better to put it along with fsl-ssi.o and fsl-spdif.o
> +
> +obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o
Ditto
> diff --git a/sound/soc/fsl/fsl-sai.c b/sound/soc/fsl/fsl-sai.c
> new file mode 100644
> index 0000000..bb57e67
> --- /dev/null
> +++ b/sound/soc/fsl/fsl-sai.c
> @@ -0,0 +1,472 @@
> +/*
> + * Freescale SAI ALSA SoC Digital Audio Interface driver.
> + *
> + * Copyright 2012-2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
There're too many double space inside. Could you pls revise it?
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <sound/core.h>
> +#include <sound/pcm_params.h>
> +#include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <sound/dmaengine_pcm.h>
I think it's better to keep <sound/xxx.h> together. And basically
we can keep header files ordered by alphabet.
> +
> +#include "fsl-sai.h"
> +
> +static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai,
> + int clk_id, unsigned int freq, int fsl_dir)
> +{
> + u32 val_cr2, reg_cr2;
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> +
> + if (fsl_dir == FSL_FMT_TRANSMITTER)
> + reg_cr2 = FSL_SAI_TCR2;
> + else
> + reg_cr2 = FSL_SAI_RCR2;
> +
> + val_cr2 = readl(sai->base + reg_cr2);
> + switch (clk_id) {
> + case FSL_SAI_CLK_BUS:
> + val_cr2 &= ~FSL_SAI_CR2_MSEL_MASK;
> + val_cr2 |= FSL_SAI_CR2_MSEL_BUS;
> + break;
> + case FSL_SAI_CLK_MAST1:
> + val_cr2 &= ~FSL_SAI_CR2_MSEL_MASK;
> + val_cr2 |= FSL_SAI_CR2_MSEL_MCLK1;
> + break;
> + case FSL_SAI_CLK_MAST2:
> + val_cr2 &= ~FSL_SAI_CR2_MSEL_MASK;
> + val_cr2 |= FSL_SAI_CR2_MSEL_MCLK2;
> + break;
> + case FSL_SAI_CLK_MAST3:
> + val_cr2 &= ~FSL_SAI_CR2_MSEL_MASK;
> + val_cr2 |= FSL_SAI_CR2_MSEL_MCLK3;
> + break;
> + default:
> + return -EINVAL;
> + }
> + writel(val_cr2, sai->base + reg_cr2);
> +
> + return 0;
> +}
> +
> +static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> + int clk_id, unsigned int freq, int dir)
> +{
> + int ret;
> +
> + if (dir == SND_SOC_CLOCK_IN)
> + return 0;
> +
> + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
> + FSL_FMT_TRANSMITTER);
> + if (ret) {
> + dev_err(cpu_dai->dev,
> + "Cannot set sai's transmitter sysclk: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
> + FSL_FMT_RECEIVER);
> + if (ret) {
> + dev_err(cpu_dai->dev,
> + "Cannot set sai's receiver sysclk: %d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int fsl_sai_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
> + int div_id, int div)
> +{
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> + u32 tcr2, rcr2;
> +
> + if (div_id == FSL_SAI_TX_DIV) {
> + tcr2 = readl(sai->base + FSL_SAI_TCR2);
> + tcr2 &= ~FSL_SAI_CR2_DIV_MASK;
> + tcr2 |= FSL_SAI_CR2_DIV(div);
> + writel(tcr2, sai->base + FSL_SAI_TCR2);
> +
> + } else if (div_id == FSL_SAI_RX_DIV) {
> + rcr2 = readl(sai->base + FSL_SAI_RCR2);
> + rcr2 &= ~FSL_SAI_CR2_DIV_MASK;
> + rcr2 |= FSL_SAI_CR2_DIV(div);
> + writel(rcr2, sai->base + FSL_SAI_RCR2);
> +
> + } else
> + return -EINVAL;
It would look better if using switch-case. And the last 'else'
could be 'default:'.
> +
> + return 0;
> +}
> +
> +static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
> + unsigned int fmt, int fsl_dir)
> +{
> + u32 val_cr2, val_cr3, val_cr4, reg_cr2, reg_cr3, reg_cr4;
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> +
> + if (fsl_dir == FSL_FMT_TRANSMITTER) {
> + reg_cr2 = FSL_SAI_TCR2;
> + reg_cr3 = FSL_SAI_TCR3;
> + reg_cr4 = FSL_SAI_TCR4;
> + } else {
> + reg_cr2 = FSL_SAI_RCR2;
> + reg_cr3 = FSL_SAI_RCR3;
> + reg_cr4 = FSL_SAI_RCR4;
> + }
> +
> + val_cr2 = readl(sai->base + reg_cr2);
> + val_cr3 = readl(sai->base + reg_cr3);
> + val_cr4 = readl(sai->base + reg_cr4);
> +
> + if (sai->fbt == FSL_SAI_FBT_MSB)
> + val_cr4 |= FSL_SAI_CR4_MF;
> + else if (sai->fbt == FSL_SAI_FBT_LSB)
> + val_cr4 &= ~FSL_SAI_CR4_MF;
> +
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + val_cr4 |= FSL_SAI_CR4_FSE;
> + val_cr4 |= FSL_SAI_CR4_FSP;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> + case SND_SOC_DAIFMT_IB_IF:
> + val_cr4 |= FSL_SAI_CR4_FSP;
> + val_cr2 &= ~FSL_SAI_CR2_BCP;
> + break;
> + case SND_SOC_DAIFMT_IB_NF:
> + val_cr4 &= ~FSL_SAI_CR4_FSP;
> + val_cr2 &= ~FSL_SAI_CR2_BCP;
> + break;
> + case SND_SOC_DAIFMT_NB_IF:
> + val_cr4 |= FSL_SAI_CR4_FSP;
> + val_cr2 |= FSL_SAI_CR2_BCP;
> + break;
> + case SND_SOC_DAIFMT_NB_NF:
> + val_cr4 &= ~FSL_SAI_CR4_FSP;
> + val_cr2 |= FSL_SAI_CR2_BCP;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> + case SND_SOC_DAIFMT_CBS_CFS:
> + val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
> + val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
> + break;
> + case SND_SOC_DAIFMT_CBM_CFM:
> + val_cr2 &= ~FSL_SAI_CR2_BCD_MSTR;
> + val_cr4 &= ~FSL_SAI_CR4_FSD_MSTR;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + val_cr3 |= FSL_SAI_CR3_TRCE;
> +
> + if (fsl_dir == FSL_FMT_RECEIVER)
> + val_cr2 |= FSL_SAI_CR2_SYNC;
> +
> + writel(val_cr2, sai->base + reg_cr2);
> + writel(val_cr3, sai->base + reg_cr3);
> + writel(val_cr4, sai->base + reg_cr4);
> +
> + return 0;
> +
Pls drop this extra line.
> +}
> +
> +static int fsl_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
> +{
> + int ret;
> +
> + ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_TRANSMITTER);
> + if (ret) {
> + dev_err(cpu_dai->dev,
> + "Cannot set sai's transmitter format: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_RECEIVER);
> + if (ret) {
> + dev_err(cpu_dai->dev,
> + "Cannot set sai's receiver format: %d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
> + unsigned int tx_mask, unsigned int rx_mask,
> + int slots, int slot_width)
> +{
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> + u32 tcr4, rcr4;
> +
> + tcr4 = readl(sai->base + FSL_SAI_TCR4);
> + tcr4 &= ~FSL_SAI_CR4_FRSZ_MASK;
> + tcr4 |= FSL_SAI_CR4_FRSZ(2);
> + writel(tcr4, sai->base + FSL_SAI_TCR4);
> + writel(tx_mask, sai->base + FSL_SAI_TMR);
> +
> + rcr4 = readl(sai->base + FSL_SAI_RCR4);
> + rcr4 &= ~FSL_SAI_CR4_FRSZ_MASK;
> + rcr4 |= FSL_SAI_CR4_FRSZ(2);
> + writel(rcr4, sai->base + FSL_SAI_RCR4);
> + writel(rx_mask, sai->base + FSL_SAI_RMR);
> +
> + return 0;
> +}
> +
> +static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *cpu_dai)
> +{
> + u32 val_cr4, val_cr5, reg_cr4, reg_cr5, word_width;
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + reg_cr4 = FSL_SAI_TCR4;
> + reg_cr5 = FSL_SAI_TCR5;
> + } else {
> + reg_cr4 = FSL_SAI_RCR4;
> + reg_cr5 = FSL_SAI_RCR5;
> + }
> +
> + val_cr4 = readl(sai->base + reg_cr4);
> + val_cr4 &= ~FSL_SAI_CR4_SYWD_MASK;
> +
> + val_cr5 = readl(sai->base + reg_cr5);
> + val_cr5 &= ~FSL_SAI_CR5_WNW_MASK;
> + val_cr5 &= ~FSL_SAI_CR5_W0W_MASK;
> + val_cr5 &= ~FSL_SAI_CR5_FBT_MASK;
> +
> + switch (params_format(params)) {
> + case SNDRV_PCM_FORMAT_S16_LE:
> + word_width = 16;
> + break;
> + case SNDRV_PCM_FORMAT_S20_3LE:
> + word_width = 20;
> + break;
> + case SNDRV_PCM_FORMAT_S24_LE:
> + word_width = 24;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + val_cr4 |= FSL_SAI_CR4_SYWD(word_width);
> + val_cr5 |= FSL_SAI_CR5_WNW(word_width);
> + val_cr5 |= FSL_SAI_CR5_W0W(word_width);
> +
> + if (sai->fbt == FSL_SAI_FBT_MSB)
> + val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
> + else if (sai->fbt == FSL_SAI_FBT_LSB)
> + val_cr5 |= FSL_SAI_CR5_FBT(0);
> +
> + writel(val_cr4, sai->base + reg_cr4);
> + writel(val_cr5, sai->base + reg_cr5);
> +
> + return 0;
> +}
> +
> +static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
> + struct snd_soc_dai *dai)
> +{
> + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
> + unsigned int tcsr, rcsr;
> +
> + tcsr = readl(sai->base + FSL_SAI_TCSR);
> + rcsr = readl(sai->base + FSL_SAI_RCSR);
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + tcsr |= FSL_SAI_CSR_FRDE;
> + rcsr &= ~FSL_SAI_CSR_FRDE;
> + } else {
> + rcsr |= FSL_SAI_CSR_FRDE;
> + tcsr &= ~FSL_SAI_CSR_FRDE;
> + }
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + case SNDRV_PCM_TRIGGER_RESUME:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + tcsr |= FSL_SAI_CSR_TERE;
> + rcsr |= FSL_SAI_CSR_TERE;
> + writel(rcsr, sai->base + FSL_SAI_RCSR);
> + udelay(10);
Does SAI really needs this udelay() here? Required by IP's operation flow?
If so, I think it's better to add comments here to explain it.
> + writel(tcsr, sai->base + FSL_SAI_TCSR);
> + break;
> +
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + if (!(dai->playback_active || dai->capture_active)) {
> + tcsr &= ~FSL_SAI_CSR_TERE;
> + rcsr &= ~FSL_SAI_CSR_TERE;
> + }
> + writel(rcsr, sai->base + FSL_SAI_RCSR);
> + udelay(10);
> + writel(tcsr, sai->base + FSL_SAI_TCSR);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
> + .set_sysclk = fsl_sai_set_dai_sysclk,
> + .set_clkdiv = fsl_sai_set_dai_clkdiv,
> + .set_fmt = fsl_sai_set_dai_fmt,
> + .set_tdm_slot = fsl_sai_set_dai_tdm_slot,
> + .hw_params = fsl_sai_hw_params,
> + .trigger = fsl_sai_trigger,
> +};
> +
> +static int fsl_sai_dai_probe(struct snd_soc_dai *dai)
> +{
> + int ret;
> + struct fsl_sai *sai = dev_get_drvdata(dai->dev);
> +
> + ret = clk_prepare_enable(sai->clk);
> + if (ret)
> + return ret;
> +
> + writel(0x0, sai->base + FSL_SAI_RCSR);
> + writel(0x0, sai->base + FSL_SAI_TCSR);
> + writel(sai->dma_params_tx.maxburst, sai->base + FSL_SAI_TCR1);
> + writel(sai->dma_params_rx.maxburst, sai->base + FSL_SAI_RCR1);
> +
> + dai->playback_dma_data = &sai->dma_params_tx;
> + dai->capture_dma_data = &sai->dma_params_rx;
> +
> + snd_soc_dai_set_drvdata(dai, sai);
> +
> + return 0;
> +}
> +
> +int fsl_sai_dai_remove(struct snd_soc_dai *dai)
static
> +{
> + struct fsl_sai *sai = dev_get_drvdata(dai->dev);
> +
> + clk_disable_unprepare(sai->clk);
> +
> + return 0;
> +}
> +
> +static struct snd_soc_dai_driver fsl_sai_dai = {
> + .probe = fsl_sai_dai_probe,
> + .remove = fsl_sai_dai_remove,
> + .playback = {
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> + .formats = FSL_SAI_FORMATS,
> + },
> + .capture = {
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> + .formats = FSL_SAI_FORMATS,
> + },
> + .ops = &fsl_sai_pcm_dai_ops,
> +};
> +
> +static const struct snd_soc_component_driver fsl_component = {
> + .name = "fsl-sai",
> +};
> +
> +static int fsl_sai_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct fsl_sai *sai;
> + int ret = 0;
> +
> + sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
> + if (!sai)
> + return -ENOMEM;
> +
> + sai->fbt = FSL_SAI_FBT_MSB;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + sai->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(sai->base))
> + return PTR_ERR(sai->base);
> +
> + sai->clk = devm_clk_get(&pdev->dev, "sai");
> + if (IS_ERR(sai->clk)) {
> + dev_err(&pdev->dev, "Cannot get sai's clock: %d\n", ret);
> + return PTR_ERR(sai->clk);
> + }
> +
> + sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
> + sai->dma_params_rx.maxburst = 6;
> +
> + sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
> + sai->dma_params_tx.maxburst = 6;
> +
> + platform_set_drvdata(pdev, sai);
> +
> + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
> + &fsl_sai_dai, 1);
> + if (ret)
> + return ret;
> +
> + ret = snd_dmaengine_pcm_register(&pdev->dev, NULL,
> + SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int fsl_sai_remove(struct platform_device *pdev)
> +{
> + snd_dmaengine_pcm_unregister(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id fsl_sai_ids[] = {
> + { .compatible = "fsl,vf610-sai", },
> + { /*sentinel*/ }
I think this could be left in blank without comments inside.
And if you really want to add it, pls add like: /* sentinel */
^ ^
> +};
> +
> +static struct platform_driver fsl_sai_driver = {
> + .probe = fsl_sai_probe,
> + .remove = fsl_sai_remove,
> +
> + .driver = {
> + .name = "fsl-sai",
> + .owner = THIS_MODULE,
> + .of_match_table = fsl_sai_ids,
> + },
> +};
> +module_platform_driver(fsl_sai_driver);
> +
> +MODULE_AUTHOR("Xiubo Li, <Li.Xiubo at freescale.com>");
> +MODULE_AUTHOR("Alison Wang, <b18965 at freescale.com>");
> +MODULE_DESCRIPTION("Freescale Soc SAI Interface");
> +MODULE_LICENSE("GPL");
Should be better if added:
MODULE_ALIAS("platform:fsl-sai");
This would support module auto-load feature in some Linux-OS.
Best regards,
Nicolin Chen
> diff --git a/sound/soc/fsl/fsl-sai.h b/sound/soc/fsl/fsl-sai.h
> new file mode 100644
> index 0000000..1637679
> --- /dev/null
> +++ b/sound/soc/fsl/fsl-sai.h
> @@ -0,0 +1,120 @@
> +/*
> + * Copyright 2012-2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __FSL_SAI_H
> +#define __FSL_SAI_H
> +
> +#include <sound/dmaengine_pcm.h>
> +
> +#define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
> + SNDRV_PCM_FMTBIT_S20_3LE |\
> + SNDRV_PCM_FMTBIT_S24_LE)
> +
> +/* SAI Transmit/Recieve Control Register */
> +#define FSL_SAI_TCSR 0x00
> +#define FSL_SAI_RCSR 0x80
> +#define FSL_SAI_CSR_TERE BIT(31)
> +#define FSL_SAI_CSR_FWF BIT(17)
> +#define FSL_SAI_CSR_FRIE BIT(8)
> +#define FSL_SAI_CSR_FRDE BIT(0)
> +
> +/* SAI Transmit Data/FIFO/MASK Register */
> +#define FSL_SAI_TDR 0x20
> +#define FSL_SAI_TFR 0x40
> +#define FSL_SAI_TMR 0x60
> +
> +/* SAI Recieve Data/FIFO/MASK Register */
> +#define FSL_SAI_RDR 0xa0
> +#define FSL_SAI_RFR 0xc0
> +#define FSL_SAI_RMR 0xe0
> +
> +/* SAI Transmit and Recieve Configuration 1 Register */
> +#define FSL_SAI_TCR1 0x04
> +#define FSL_SAI_RCR1 0x84
> +
> +/* SAI Transmit and Recieve Configuration 2 Register */
> +#define FSL_SAI_TCR2 0x08
> +#define FSL_SAI_RCR2 0x88
> +#define FSL_SAI_CR2_SYNC BIT(30)
> +#define FSL_SAI_CR2_MSEL_MASK (0xff << 26)
> +#define FSL_SAI_CR2_MSEL_BUS 0
> +#define FSL_SAI_CR2_MSEL_MCLK1 BIT(26)
> +#define FSL_SAI_CR2_MSEL_MCLK2 BIT(27)
> +#define FSL_SAI_CR2_MSEL_MCLK3 (BIT(26) | BIT(27))
> +#define FSL_SAI_CR2_BCP BIT(25)
> +#define FSL_SAI_CR2_BCD_MSTR BIT(24)
> +#define FSL_SAI_CR2_DIV(x) (x)
> +#define FSL_SAI_CR2_DIV_MASK 0xff
> +
> +/* SAI Transmit and Recieve Configuration 3 Register */
> +#define FSL_SAI_TCR3 0x0c
> +#define FSL_SAI_RCR3 0x8c
> +#define FSL_SAI_CR3_TRCE BIT(16)
> +#define FSL_SAI_CR3_WDFL(x) (x)
> +#define FSL_SAI_CR3_WDFL_MASK 0x1f
> +
> +/* SAI Transmit and Recieve Configuration 4 Register */
> +#define FSL_SAI_TCR4 0x10
> +#define FSL_SAI_RCR4 0x90
> +#define FSL_SAI_CR4_FRSZ(x) (((x) - 1) << 16)
> +#define FSL_SAI_CR4_FRSZ_MASK (0x1f << 16)
> +#define FSL_SAI_CR4_SYWD(x) (((x) - 1) << 8)
> +#define FSL_SAI_CR4_SYWD_MASK (0x1f << 8)
> +#define FSL_SAI_CR4_MF BIT(4)
> +#define FSL_SAI_CR4_FSE BIT(3)
> +#define FSL_SAI_CR4_FSP BIT(1)
> +#define FSL_SAI_CR4_FSD_MSTR BIT(0)
> +
> +/* SAI Transmit and Recieve Configuration 5 Register */
> +#define FSL_SAI_TCR5 0x14
> +#define FSL_SAI_RCR5 0x94
> +#define FSL_SAI_CR5_WNW(x) (((x) - 1) << 24)
> +#define FSL_SAI_CR5_WNW_MASK (0x1f << 24)
> +#define FSL_SAI_CR5_W0W(x) (((x) - 1) << 16)
> +#define FSL_SAI_CR5_W0W_MASK (0x1f << 16)
> +#define FSL_SAI_CR5_FBT(x) ((x) << 8)
> +#define FSL_SAI_CR5_FBT_MASK (0x1f << 8)
> +
> +/* SAI audio dividers */
> +#define FSL_SAI_TX_DIV 0
> +#define FSL_SAI_RX_DIV 1
> +
> +/* SAI type */
> +#define FSL_SAI_DMA BIT(0)
> +#define FSL_SAI_USE_AC97 BIT(1)
> +#define FSL_SAI_NET BIT(2)
> +#define FSL_SAI_TRA_SYN BIT(3)
> +#define FSL_SAI_REC_SYN BIT(4)
> +#define FSL_SAI_USE_I2S_SLAVE BIT(5)
> +
> +#define FSL_FMT_TRANSMITTER 0
> +#define FSL_FMT_RECEIVER 1
> +
> +/* SAI clock sources */
> +#define FSL_SAI_CLK_BUS 0
> +#define FSL_SAI_CLK_MAST1 1
> +#define FSL_SAI_CLK_MAST2 2
> +#define FSL_SAI_CLK_MAST3 3
> +
> +enum fsl_sai_fbt {
> + FSL_SAI_FBT_MSB,
> + FSL_SAI_FBT_LSB,
> +};
> +
> +struct fsl_sai {
> + struct clk *clk;
> +
> + void __iomem *base;
> +
> + enum fsl_sai_fbt fbt;
> +
> + struct snd_dmaengine_dai_dma_data dma_params_rx;
> + struct snd_dmaengine_dai_dma_data dma_params_tx;
> +};
> +
> +#endif /* __FSL_SAI_H */
> --
> 1.8.4
>
More information about the Linuxppc-dev
mailing list