[PATCH 06/23] powerpc/eeh: Make eeh_init() public

Gavin Shan shangw at linux.vnet.ibm.com
Thu May 30 18:23:48 EST 2013


For EEH on PowerNV platform, we will do EEH probe based on the
real PCI devices. The PCI devices are available after PCI probe.
So we have to call eeh_init() explicitly on PowerNV platform
after PCI probe. The patch also does EEH probe for PowerNV platform
in eeh_init().

Signed-off-by: Gavin Shan <shangw at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/eeh.h       |    6 ++++++
 arch/powerpc/platforms/pseries/eeh.c |   23 +++++++++++++++++++++--
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 557d82a..1ff2aa9 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -199,6 +199,7 @@ void eeh_pci_dev_traverse(struct pci_bus *bus,
 		eeh_pci_traverse_func fn, void *flag);
 void *eeh_dev_init(struct device_node *dn, void *data);
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
+int __init eeh_init(void);
 int __init eeh_ops_register(struct eeh_ops *ops);
 int __exit eeh_ops_unregister(const char *name);
 unsigned long eeh_check_failure(const volatile void __iomem *token,
@@ -227,6 +228,11 @@ void eeh_remove_bus_device(struct pci_dev *, int);
 
 #else /* !CONFIG_EEH */
 
+static inline int eeh_init(void)
+{
+	return 0;
+}
+
 static inline void *eeh_dev_init(struct device_node *dn, void *data)
 {
 	return NULL;
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6b73d6c..abe26f8 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -674,11 +674,21 @@ int __exit eeh_ops_unregister(const char *name)
  * Even if force-off is set, the EEH hardware is still enabled, so that
  * newer systems can boot.
  */
-static int __init eeh_init(void)
+int __init eeh_init(void)
 {
 	struct pci_controller *hose, *tmp;
 	struct device_node *phb;
-	int ret;
+	static int cnt = 0;
+	int ret = 0;
+
+	/*
+	 * We have to delay the initialization on PowerNV after
+	 * the PCI hierarchy tree has been built because the PEs
+	 * are figured out based on PCI devices instead of device
+	 * tree nodes
+	 */
+	if (machine_is(powernv) && cnt++ <= 0)
+		return ret;
 
 	/* call platform initialization function */
 	if (!eeh_ops) {
@@ -700,6 +710,15 @@ static int __init eeh_init(void)
 			phb = hose->dn;
 			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
 		}
+	} else if (eeh_probe_mode_dev()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node) {
+			eeh_pci_dev_traverse(hose->bus, eeh_ops->dev_probe, NULL);
+		}
+	} else {
+		pr_warning("%s: Invalid probe mode %d\n",
+			__func__, eeh_probe_mode);
+		return -EINVAL;
 	}
 
 	if (eeh_subsystem_enabled)
-- 
1.7.5.4



More information about the Linuxppc-dev mailing list