[PATCH] powerpc/pci: fix PCI-e check link issue
Rojhalat Ibrahim
imr at rtschenk.de
Tue May 21 22:07:52 EST 2013
On Friday 17 May 2013 15:35:29 Yuanquan Chen wrote:
> For Freescale powerpc platform, the PCI-e bus number uses the reassign mode
> by default. It means the second PCI-e controller's hose->first_busno is the
> first controller's last bus number adding 1. For some hotpluged device(or
> controlled by FPGA), the device is linked to PCI-e slot at linux runtime.
> It needs rescan for the system to add it and driver it to work. It successes
> to rescan the device linked to the first PCI-e controller's slot, but fails
> to rescan the device linked to the second PCI-e controller's slot. The
> cause is that the bus->number is reset to 0, which isn't equal to the
> hose->first_busno for the second controller checking PCI-e link. So it
> doesn't really check the PCI-e link status, the link status is always
> no_link. The device won't be really rescaned. Reset the bus->number to
> hose->first_busno in the function fsl_pcie_check_link(), it will do the
> real checking PCI-e link status for the second controller, the device will
> be rescaned.
>
> Signed-off-by: Yuanquan Chen <Yuanquan.Chen at freescale.com>
Tested-by: Rojhalat Ibrahim <imr at rtschenk.de>
> ---
> arch/powerpc/sysdev/fsl_pci.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
> index 028ac1f..534597a 100644
> --- a/arch/powerpc/sysdev/fsl_pci.c
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> @@ -64,7 +64,7 @@ static int fsl_pcie_check_link(struct pci_controller
> *hose) if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
> if (hose->ops->read == fsl_indirect_read_config) {
> struct pci_bus bus;
> - bus.number = 0;
> + bus.number = hose->first_busno;
> bus.sysdata = hose;
> bus.ops = hose->ops;
> indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
More information about the Linuxppc-dev
mailing list