SATA FSL and upstreaming

[Zang Roy-R61911]

> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-bounces+tie-
> fei.zang=freescale.com at lists.ozlabs.org] On Behalf Of Benjamin
> Herrenschmidt
> Sent: Thursday, May 16, 2013 2:59 PM
> To: Zang Roy-R61911
> Cc: Xie Shaohui-B21989; Liu Qiang-B32616; tiejun.chen; Fleming Andy-
> AFLEMING; Bhushan Bharat-R65777; linuxppc-dev at lists.ozlabs.org
> Subject: Re: SATA FSL and upstreaming
> 
> Ok, so I found this one on the SDK ISO: rcw_15g_2000mhz.bin
> 
> I flashed that, did pix altbank, I'm now booted from Bank 4 ... and PCIe
> is still showing nothing. I have cards in slots 4 and 7 (assuming that's
> the right numbering, ie, 7 is the top one).
Right.
> 
> Are we sure we don't have a problem with some DIP ? I saw some of them
> control some SERDES stuff (SW5 iirc)
Your serdes1 clock is 100MHz,which is correct.
Slot7 (PCIe1) does not need extra DIP to make it work.
Maybe you also need to update the U-boot.
Roy