SATA FSL and upstreaming

[Zang Roy-R61911]

> -----Original Message-----
> From: tiejun.chen [mailto:tiejun.chen at windriver.com]
> Sent: Thursday, May 16, 2013 2:36 PM
> To: Benjamin Herrenschmidt
> Cc: Zang Roy-R61911; Liu Qiang-B32616; Fleming Andy-AFLEMING; linuxppc-
> dev at lists.ozlabs.org; Xie Shaohui-B21989; Bhushan Bharat-R65777
> Subject: Re: SATA FSL and upstreaming
> 
> On 05/16/2013 02:21 PM, Benjamin Herrenschmidt wrote:
> > On Thu, 2013-05-16 at 14:17 +0800, tiejun.chen wrote:
> >> I think you can use Bharat's RCW, which seems RR_HXAPNSP_0x36, then
> >> please take a look at this:
> >
> > Ok, how do I update my RCW to bse Bharat's ?
> 
> 
> Firstly please check which flash bank is used since we have to know where
> should be updated RCW.
> 
> What is SW7[1:4]?
> 
> Or we have another simple way in u-boot prompt:
> 
> => md.b ffdf002c
> ffdf002c: 4f 00 fe 00 39 00 00 00 00 00 00 00 00 00 00 00
> O...9...........
> ...
> 
> This means we're on bank4.
Ben's log shows it is bank0.

Board: P5020DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 0

Roy