SATA FSL and upstreaming

Zang Roy-R61911 r61911 at freescale.com
Thu May 16 15:59:05 EST 2013


For PCIe issue, I might be related to your RCW (Reset Configuration Word).
Can you help to provide the u-boot log?
Roy

> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-bounces+tie-
> fei.zang=freescale.com at lists.ozlabs.org] On Behalf Of Benjamin
> Herrenschmidt
> Sent: Thursday, May 16, 2013 1:46 PM
> To: Liu Qiang-B32616
> Cc: linuxppc-dev at lists.ozlabs.org; Fleming Andy-AFLEMING; Xie Shaohui-
> B21989
> Subject: Re: SATA FSL and upstreaming
> 
> On Thu, 2013-05-16 at 14:47 +1000, Benjamin Herrenschmidt wrote:
> > Hi folks !
> >
> > So I was trying to use my 5020ds to test some stuff today. Since I
> > hadn't used it in a while, I decided to "upgrade" it to the latest NOR
> > etc...
> 
> On another note, I can't seem to get any PCIe card recognized in any
> slot...
> 
> Can you give me an example config of the DIP switches that is known to
> work with some slots ? Is there some EEPROM config needed ? If yes, any
> pointers ? (I can't quite make sense of either u-boot or the doc there).
> 
> Thanks,
> Ben.
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev




More information about the Linuxppc-dev mailing list