[PATCH] powerpc: restore dbcr0 on user space exit
Bharat Bhushan
r65777 at freescale.com
Thu May 16 15:29:51 EST 2013
On BookE (Branch taken + Single Step) is as same as Branch Taken
on BookS and in Linux we simulate BookS behavior for BookE as well.
When doing so, in Branch taken handling we want to set DBCR0_IC but
we update the current->thread->dbcr0 and not DBCR0.
Now on 64bit the current->thread.dbcr0 (and other debug registers)
is synchronized ONLY on context switch flow. But after handling
Branch taken in debug exception if we return back to user space
without context switch then single stepping change (DBCR0_ICMP)
does not get written in h/w DBCR0 and Instruction Complete exception
does not happen.
This fixes using ptrace reliably on BookE-PowerPC
Signed-off-by: Bharat Bhushan <bharat.bhushan at freescale.com>
---
arch/powerpc/kernel/asm-offsets.c | 1 +
arch/powerpc/kernel/entry_64.S | 24 ++++++++++++++++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b51a97c..1e2f450 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -103,6 +103,7 @@ int main(void)
#endif /* CONFIG_VSX */
#ifdef CONFIG_PPC64
DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
+ DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
#else /* CONFIG_PPC64 */
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 794889b..561630d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -614,7 +614,9 @@ _GLOBAL(ret_from_except_lite)
* from the interrupt.
*/
#ifdef CONFIG_PPC_BOOK3E
+ ld r3,PACACURRENT(r13)
wrteei 0
+ lwz r10,(THREAD+THREAD_DBCR0)(r3)
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
@@ -628,15 +630,29 @@ _GLOBAL(ret_from_except_lite)
/* Check current_thread_info()->flags */
andi. r0,r4,_TIF_USER_WORK_MASK
+ bne 1f
+#ifdef CONFIG_PPC_BOOK3E
+ /*
+ * Check to see if the dbcr0 register is set up to debug.
+ * Use the internal debug mode bit to do this.
+ */
+ andis. r0,r10,DBCR0_IDM at h
beq restore
-
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
+ mfmsr r0
+ rlwinm r0,r0,0,~MSR_DE /* Clear MSR.DE */
+ mtmsr r0
+ mtspr SPRN_DBCR0,r10
+ li r10, -1
+ mtspr SPRN_DBSR,r10
+ b restore
+#endif
+1: andi. r0,r4,_TIF_NEED_RESCHED
+ beq 2f
bl .restore_interrupts
SCHEDULE_USER
b .ret_from_except_lite
-1: bl .save_nvgprs
+2: bl .save_nvgprs
bl .restore_interrupts
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_notify_resume
--
1.5.6.5
More information about the Linuxppc-dev
mailing list