[PATCH 1/1] powerpc: mpc512x_dma: add support for data transfers between memory and i/o memory

[Anatolij Gustschin]

Hello Alexander,

On Fri, 3 May 2013 14:43:23 +0400
Alexander Popov <a13xp0p0v88 at gmail.com> wrote:

> Hello Anatolij,
> 
> > Note that there is a patch for .device_prep_slave_sg() operation
> > for this driver as part of this series:
> > https://patchwork.kernel.org/patch/2368581/
> > https://patchwork.kernel.org/patch/2368591/
> Thanks, I haven't seen that patch.
> It's certainly what my SCLPC device driver needs
> (http://patchwork.ozlabs.org/patch/241010/).
> I will send the second version of it which uses .device_prep_slave_sg().
> 
> > maybe you can reuse and improve it.
> > Anatolij
> Should I propose my additions at https://patchwork.kernel.org/patch/2368591/ ?

Yes, I think so. I only used drivers new .device_prep_slave_sg()
for SDHC DMA channel transfers up to now. Adding support for other
peripherals would be good. With generic DMA DT bindings patch for
this driver you can use

    dmas = <&dma0 26>;
    dma-names = "rx-tx";

in your sclpc at 10100 DT node and then
dma_request_slave_channel(&pdev->dev, "rx-tx") in the lpbfifo
driver.

Thanks,

Anatolij