[PATCH V4] powerpc/85xx: Add machine check handler to fix PCIe erratum on mpc85xx

[Scott Wood]

On 03/29/2013 03:03:51 AM, Jia Hongtao-B38951 wrote:
> 
> 
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Saturday, March 16, 2013 12:35 AM
> > To: Jia Hongtao-B38951
> > Cc: Wood Scott-B07421; David Laight; linuxppc-dev at lists.ozlabs.org;
> > Stuart Yoder
> > Subject: Re: [PATCH V4] powerpc/85xx: Add machine check handler to  
> fix
> > PCIe erratum on mpc85xx
> >
> > On 03/14/2013 09:47:58 PM, Jia Hongtao-B38951 wrote:
> > >
> > > > -----Original Message-----
> > > > From: Wood Scott-B07421
> > > > Sent: Thursday, March 14, 2013 12:38 AM
> > > > To: David Laight
> > > > Cc: Jia Hongtao-B38951; Wood Scott-B07421;
> > > linuxppc-dev at lists.ozlabs.org;
> > > > Stuart Yoder
> > > > Subject: Re: [PATCH V4] powerpc/85xx: Add machine check handler  
> to
> > > fix
> > > > PCIe erratum on mpc85xx
> > > >
> > > > On 03/13/2013 04:40:40 AM, David Laight wrote:
> > > > > > Hmm, seems there's no probe_user_address() -- for userspace  
> we
> > > > > > basically want the same thing minus the KERNEL_DS.  See
> > > > > > arch/powerpc/perf/callchain.c for an example.
> > > > >
> > > > > Isn't that just copy_from_user() ?
> > > >
> > > > Plus pagefault_disable/enable().
> > > >
> > > > -Scott
> > >
> > > pagefault_disable() is identical to preempt_disable(). So I think  
> this
> > > could not avoid other cpu to swap out the instruction we want to  
> read
> > > back.
> > > probe_kernel_address() also have the same issue.
> >
> > That's not the point -- the point is to let the page fault handler  
> know
> > that it should go directly to bad_page_fault().  Do not pass
> > handle_mm_fault().  Do not collect a page from disk.
> >
> > Granted, we're already in atomic context which will have that effect
> > due to being in the machine check handler, but it's better to be
> > explicit about it and not depend on how pagefault_diasble() is
> > implemented.
> >
> > -Scott
> 
> 
> Based on the comments I updated the machine check handler.
> 
> Changes from last version:
> * Check MSR_GS state
> * Check if the instruction is LD
> * Handle the user space issue
> 
> The updated machine check handler is as following:
> 
> int fsl_pci_mcheck_exception(struct pt_regs *regs)
> {
>         unsigned int op, rd;
>         u32 inst;
>         int ret;
>         phys_addr_t addr = 0;
> 
>         /* Let KVM/QEMU deal with the exception */
>         if (regs->msr & MSR_GS)
>                 return 0;
> 
> #ifdef CONFIG_PHYS_64BIT
>         addr = mfspr(SPRN_MCARU);
>         addr <<= 32;
> #endif
>         addr += mfspr(SPRN_MCAR);
> 
>         if (is_in_pci_mem_space(addr)) {
>                 if (user_mode(regs)) {
>                         pagefault_disable();
>                         ret = copy_from_user(&(inst), (u32 __user  
> *)regs->nip, sizeof(inst));
>                         pagefault_enable();

You could use get_user() instead of copy_from_user().

>                 } else {
>                         ret = probe_kernel_address(regs->nip, inst);
>                 }
> 
>                 op = get_op(inst);
>                 /* Check if the instruction is LD */
>                 if (!ret && (op == 111010)) {
>                         rd = get_rt(inst);
>                         regs->gpr[rd] = 0xffffffff;
>                 }
> 
>                 regs->nip += 4;
>                 return 1;
>         }
> 
>         return 0;
> }
> 
> BTW, I'm still not sure how to deal with LD instruction with update.

You would need to do the update yourself.  Or just say that's a case  
you don't handle, and return 0.

Again, please check for the size of the load operation.

-Scott