[PATCH 4/5 v11] iommu/fsl: Add additional iommu attributes required by the PAMU driver.

Varun Sethi Varun.Sethi at freescale.com
Fri Mar 29 06:54:01 EST 2013


Added the following domain attributes for the FSL PAMU driver:
1. Added new iommu stash attribute, which allows setting of the
   LIODN specific stash id parameter through IOMMU API.
2. Added an attribute for enabling/disabling DMA to a particular
   memory window.
3. Added domain attribute to check for PAMUV1 specific constraints.

Signed-off-by: Varun Sethi <Varun.Sethi at freescale.com>
---
- no change in v11.
- no change in v10.
 include/linux/iommu.h |   35 +++++++++++++++++++++++++++++++++++
 1 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 2727810..af8f996 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -40,6 +40,25 @@ struct notifier_block;
 typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
 			struct device *, unsigned long, int, void *);
 
+/* cache stash targets */
+enum stash_target {
+	IOMMU_ATTR_CACHE_L1 = 1,
+	IOMMU_ATTR_CACHE_L2,
+	IOMMU_ATTR_CACHE_L3,
+};
+
+/* This attribute corresponds to IOMMUs capable of generating
+ * a stash transaction. A stash transaction is typically a
+ * hardware initiated prefetch of data from memory to cache.
+ * This attribute allows configuring stashig specific parameters
+ * in the IOMMU hardware.
+ */
+
+struct iommu_stash_attribute {
+	u32 	cpu;	/* cpu number */
+	u32 	cache;	/* cache to stash to: L1,L2,L3 */
+};
+
 struct iommu_domain_geometry {
 	dma_addr_t aperture_start; /* First address that can be mapped    */
 	dma_addr_t aperture_end;   /* Last address that can be mapped     */
@@ -57,10 +76,26 @@ struct iommu_domain {
 #define IOMMU_CAP_CACHE_COHERENCY	0x1
 #define IOMMU_CAP_INTR_REMAP		0x2	/* isolates device intrs */
 
+/*
+ * Following constraints are specifc to PAMUV1:
+ *  -aperture must be power of 2, and naturally aligned
+ *  -number of windows must be power of 2, and address space size
+ *   of each window is determined by aperture size / # of windows
+ *  -the actual size of the mapped region of a window must be power
+ *   of 2 starting with 4KB and physical address must be naturally
+ *   aligned.
+ * DOMAIN_ATTR_FSL_PAMUV1 corresponds to the above mentioned contraints.
+ * The caller can invoke iommu_domain_get_attr to check if the underlying
+ * iommu implementation supports these constraints.
+ */
+
 enum iommu_attr {
 	DOMAIN_ATTR_GEOMETRY,
 	DOMAIN_ATTR_PAGING,
 	DOMAIN_ATTR_WINDOWS,
+	DOMAIN_ATTR_PAMU_STASH,
+	DOMAIN_ATTR_PAMU_ENABLE,
+	DOMAIN_ATTR_FSL_PAMUV1,
 	DOMAIN_ATTR_MAX,
 };
 
-- 
1.7.4.1




More information about the Linuxppc-dev mailing list