[PATCH] powerpc/dts: Add qe support for 36bit

Zhicheng Fan B32736 at freescale.com
Thu Mar 21 20:26:01 EST 2013


fixed the following errors:
	Error: arch/powerpc/boot/dts/p1025rdb.dtsi:326.2-3 label or path, 'qe', not found
	Error: arch/powerpc/boot/dts/fsl/p1021si-post.dtsi:242.2-3 label or path, 'qe', not found
	FATAL ERROR: Syntax error parsing input tree

Signed-off-by: Zhicheng Fan <B32736 at freescale.com>
---
 arch/powerpc/boot/dts/p1025rdb_36b.dts |   48 ++++++++++++++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts
index 4ce4bfa..c74c39b 100644
--- a/arch/powerpc/boot/dts/p1025rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts
@@ -82,6 +82,54 @@
 				  0x0 0x100000>;
 		};
 	};
+
+	qe: qe at fffe80000 {
+		ranges = <0x0 0xf 0xffe80000 0x40000>;
+		reg = <0xf 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc at 2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio at 2120 {
+			qe_phy0: ethernet-phy at 0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy at 03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy at 11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc at 2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+
 };
 
 /include/ "p1025rdb.dtsi"
-- 
1.7.0.4




More information about the Linuxppc-dev mailing list