[PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree

[Kumar Gala]

On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote:

> Signed-off-by: Shaveta Leekha <shaveta at freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
> Signed-off-by: Andy Fleming <afleming at freescale.com>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> arch/powerpc/boot/dts/b4860qds.dts |  178 ++++++++++++++++++++++++++++++++++++
> 1 files changed, 178 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/b4860qds.dts
> 
> diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts
> new file mode 100644
> index 0000000..ae6ac05
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/b4860qds.dts
> @@ -0,0 +1,178 @@
> +/*
> + * B4860DS Device Tree Source
> + *
> + * Copyright 2012 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in the
> + *       documentation and/or other materials provided with the distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote products
> + *       derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/b4860si-pre.dtsi"
> +
> +/ {
> +	model = "fsl,B4860QDS";
> +	compatible = "fsl,B4860QDS";
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&mpic>;
> +
> +	ifc: localbus at ffe124000 {
> +		reg = <0xf 0xfe124000 0 0x2000>;
> +		ranges = <0 0 0xf 0xe8000000 0x08000000
> +			  2 0 0xf 0xff800000 0x00010000
> +			  3 0 0xf 0xffdf0000 0x00008000>;
> +
> +		nor at 0,0 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "cfi-flash";
> +			reg = <0x0 0x0 0x8000000>;
> +			bank-width = <2>;
> +			device-width = <1>;
> +		};
> +
> +		nand at 2,0 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "fsl,ifc-nand";
> +			reg = <0x2 0x0 0x10000>;
> +
> +			partition at 0 {
> +				/* This location must not be altered  */
> +				/* 1MB for u-boot Bootloader Image */
> +				reg = <0x0 0x00100000>;
> +				label = "NAND U-Boot Image";
> +				read-only;
> +			};
> +
> +			partition at 100000 {
> +				/* 1MB for DTB Image */
> +				reg = <0x00100000 0x00100000>;
> +				label = "NAND DTB Image";
> +			};
> +
> +			partition at 200000 {
> +				/* 10MB for Linux Kernel Image */
> +				reg = <0x00200000 0x00A00000>;
> +				label = "NAND Linux Kernel Image";
> +			};
> +
> +			partition at c00000 {
> +				/* 500MB for Root file System Image */
> +				reg = <0x00c00000 0x1F400000>;
> +				label = "NAND RFS Image";
> +			};
> +		};
> +
> +		board-control at 3,0 {
> +			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
> +			reg = <3 0 0x300>;
> +		};
> +	};
> +

dscr nodes are missing and should be included


> +	memory {
> +		device_type = "memory";
> +	};
> +
> +	soc: soc at ffe000000 {
> +		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
> +		reg = <0xf 0xfe000000 0 0x00001000>;
> +		spi at 110000 {
> +			flash at 0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				compatible = "sst,sst25wf040";
> +				reg = <0>;
> +				spi-max-frequency = <40000000>; /* input clock */
> +			};
> +		};
> +
> +		sdhc at 114000 {
> +			status = "disabled";
> +		};
> +
> +		i2c at 118000 {
> +			eeprom at 50 {
> +				compatible = "at24,24c64";
> +				reg = <0x50>;
> +			};
> +			eeprom at 51 {
> +				compatible = "at24,24c256";
> +				reg = <0x51>;
> +			};
> +			eeprom at 53 {
> +				compatible = "at24,24c256";
> +				reg = <0x53>;
> +			};
> +			eeprom at 57 {
> +				compatible = "at24,24c256";
> +				reg = <0x57>;
> +			};
> +			rtc at 68 {
> +				compatible = "dallas,ds3232";
> +				reg = <0x68>;
> +				interrupts = <0x1 0x1 0 0>;

there is no IRQ for RTC on the board.

> +			};
> +		};
> +
> +		usb at 210000 {
> +			dr_mode = "host";
> +			phy_type = "ulpi";
> +		};
> +
> +	};
> +
> +	pci0: pcie at ffe200000 {
> +		reg = <0xf 0xfe200000 0 0x10000>;
> +		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
> +			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
> +		pcie at 0 {
> +			ranges = <0x02000000 0 0xe0000000
> +				  0x02000000 0 0xe0000000
> +				  0 0x20000000
> +
> +				  0x01000000 0 0x00000000
> +				  0x01000000 0 0x00000000
> +				  0 0x00010000>;
> +		};
> +	};
> +
> +	rio: rapidio at ffe0c0000 {
> +		reg = <0xf 0xfe0c0000 0 0x11000>;
> +
> +		port1 {
> +			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
> +		};
> +		port2 {
> +			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
> +		};
> +	};
> +
> +};
> +
> +/include/ "fsl/b4860si-post.dtsi"
> -- 
> 1.7.6.GIT
>