[PATCH] Make PCIe hotplug work with Freescale PCIe controllers

[Rojhalat Ibrahim]

On Monday 11 March 2013 12:17:42 Kumar Gala wrote:
> 
> Rather than do it this way, we should do something like:
> 
> fsl_indirect_read_config() {
> 	link check
> 	if (link)
> 		indirect_read_config()
> }
> 
> and just add fsl_indirect_{r,w}_config into fsl_pci.c
> 
> - k
> 

Ok, how about this:


Signed-off-by: Rojhalat Ibrahim <imr at rtschenk.de>
---
 arch/powerpc/sysdev/fsl_pci.c |   49 
++++++++++++++++++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 682084d..693db9f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -36,6 +36,8 @@
 
 static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
+static struct pci_ops *indirect_pci_ops;
+
 static void quirk_fsl_pcie_header(struct pci_dev *dev)
 {
 	u8 hdr_type;
@@ -64,6 +66,45 @@ static int __init fsl_pcie_check_link(struct pci_controller 
*hose)
 	return 0;
 }
 
+static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	
+	// check the link status
+	if ((bus->number == hose->first_busno) && (devfn == 0)) {
+		u32 ltssm = 0;
+		indirect_pci_ops->read(bus, 0, PCIE_LTSSM, 4, &ltssm);
+		if (ltssm < PCIE_LTSSM_L0) {
+			hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+		} else {
+			hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+		}
+	}
+	return indirect_pci_ops->read(bus, devfn, offset, len, val);
+}
+
+static int fsl_indirect_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 val)
+{
+	return indirect_pci_ops->write(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops fsl_indirect_pci_ops =
+{
+	.read = fsl_indirect_read_config,
+	.write = fsl_indirect_write_config,
+};
+
+static void __init fsl_setup_indirect_pci(struct pci_controller* hose,
+					  resource_size_t cfg_addr,
+					  resource_size_t cfg_data, u32 flags)
+{
+	setup_indirect_pci(hose, cfg_addr, cfg_data, flags);
+	indirect_pci_ops = hose->ops;
+	hose->ops = &fsl_indirect_pci_ops;
+}
+
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 
 #define MAX_PHYS_ADDR_BITS	40
@@ -461,8 +502,8 @@ int __init fsl_add_bridge(struct platform_device *pdev, 
int is_primary)
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
-		PPC_INDIRECT_TYPE_BIG_ENDIAN);
+	fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
+			       PPC_INDIRECT_TYPE_BIG_ENDIAN);
 
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		/* For PCIE read HEADER_TYPE to identify controler mode */
@@ -766,8 +807,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 		if (ret)
 			goto err0;
 	} else {
-		setup_indirect_pci(hose, rsrc_cfg.start,
-				   rsrc_cfg.start + 4, 0);
+		fsl_setup_indirect_pci(hose, rsrc_cfg.start,
+				       rsrc_cfg.start + 4, 0);
 	}
 
 	printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "