[PATCH 1/6 v8] iommu/fsl: Store iommu domain information pointer in archdata.

[Sethi Varun-B16395]

Thanks for the clarification Alexey.

Kumar,
We are using this new field (for PAMU) to store the iommu domain (for iommu API) information for a device.

Regards
Varun

> -----Original Message-----
> From: Alexey Kardashevskiy [mailto:aik at ozlabs.ru]
> Sent: Friday, March 01, 2013 6:55 AM
> To: Kumar Gala
> Cc: Sethi Varun-B16395; Benjamin Herrenschmidt; iommu at lists.linux-
> foundation.org; linuxppc-dev at lists.ozlabs.org list; linux-
> kernel at vger.kernel.org list; Wood Scott-B07421; Yoder Stuart-B08248;
> Joerg Roedel; Paul Mackerras; David Gibson; Alex Williamson
> Subject: Re: [PATCH 1/6 v8] iommu/fsl: Store iommu domain information
> pointer in archdata.
> 
> Hi!
> 
> On POWERNV we use only the part of IOMMU API which handles devices and
> groups. We do not use IOMMU domains as VFIO containers do everything we
> need for VFIO and we do not implement iommu_ops as it is not very
> relevant to our architecture (does not give dma window properties, etc).
> 
> So your work does not overlap with my work :)
> 
> 
> On 01/03/13 02:51, Kumar Gala wrote:
> >
> > On Feb 27, 2013, at 6:04 AM, Sethi Varun-B16395 wrote:
> >
> >> Hi Kumar,Ben,
> >> I am implementing the Freescale PAMU (IOMMU) driver using the Linux
> IOMMU API. In this particular patch, I have added a new field to
> dev_archdata structure to store the dma domain information.
> >> This field is updated whenever we attach a device to an iommu domain.
> >>
> >> Regards
> >> Varun
> >
> > Would be good to see if this overlaps with Alexey's work for IOMMU
> driver for powernv.
> >
> > - k
> >
> >>
> >>> -----Original Message-----
> >>> From: Joerg Roedel [mailto:joro at 8bytes.org]
> >>> Sent: Wednesday, February 27, 2013 5:01 PM
> >>> To: Sethi Varun-B16395
> >>> Cc: iommu at lists.linux-foundation.org; linuxppc-dev at lists.ozlabs.org;
> >>> linux-kernel at vger.kernel.org; Wood Scott-B07421; Yoder Stuart-B08248
> >>> Subject: Re: [PATCH 1/6 v8] iommu/fsl: Store iommu domain
> >>> information pointer in archdata.
> >>>
> >>> On Mon, Feb 18, 2013 at 06:22:14PM +0530, Varun Sethi wrote:
> >>>> Add a new field in the device (powerpc) archdata structure for
> >>>> storing iommu domain information pointer. This pointer is stored
> >>>> when the device is attached to a particular domain.
> >>>>
> >>>>
> >>>> Signed-off-by: Varun Sethi <Varun.Sethi at freescale.com>
> >>>> ---
> >>>> - no change.
> >>>> arch/powerpc/include/asm/device.h |    4 ++++
> >>>> 1 files changed, 4 insertions(+), 0 deletions(-)
> >>>>
> >>>> diff --git a/arch/powerpc/include/asm/device.h
> >>>> b/arch/powerpc/include/asm/device.h
> >>>> index 77e97dd..6dc79fe 100644
> >>>> --- a/arch/powerpc/include/asm/device.h
> >>>> +++ b/arch/powerpc/include/asm/device.h
> >>>> @@ -28,6 +28,10 @@ struct dev_archdata {
> >>>> 		void		*iommu_table_base;
> >>>> 	} dma_data;
> >>>>
> >>>> +	/* IOMMU domain information pointer. This would be set
> >>>> +	 * when this device is attached to an iommu_domain.
> >>>> +	 */
> >>>> +	void			*iommu_domain;
> >>>
> >>> Please Cc the PowerPC Maintainers on this, so that they can have a
> >>> look at it. This also must be put this into an #ifdef
> CONFIG_IOMMU_API.
> 
> 
> --
> Alexey