[1/1] MPC831x: fix PCI express probing

Scott Wood scottwood at freescale.com
Fri Jun 28 09:16:47 EST 2013


On Tue, Mar 19, 2013 at 10:58:25AM +0100, Sergey Gerasimov wrote:
> For MPC831x the bus probing function also needs the fixup to assign
> addresses to the PCI devices as it was for MPC85xx and MPC86xx.
> The fixup of the bridge vendor and device ID should be done early in
> PCI probing. Else the bridge is not detected as FIXUP_HEADER is called
> too late.
> 
> Signed-off-by: Sergey Gerasimov <Sergey.Gerasimov at astrosoft-development.com>
> 
> ---
> arch/powerpc/sysdev/fsl_pci.c | 67 +++++++++++++++++++------------------------
>  1 file changed, 30 insertions(+), 37 deletions(-)
> 
> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
> index 682084d..b4f0873 100644
> --- a/arch/powerpc/sysdev/fsl_pci.c
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> @@ -64,6 +64,34 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
>  	return 0;
>  }
>  
> +void fsl_pcibios_fixup_bus(struct pci_bus *bus)
> +{
> +	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
> +	int i;
> +
> +
> +	if ((bus->parent == hose->bus)
> +		&& ((fsl_pcie_bus_fixup
> +			&& pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP))
> +				|| (hose->indirect_type
> +					& PPC_INDIRECT_TYPE_NO_PCIE_LINK))) {
> +		for (i = 0; i < 4; ++i) {
[snip]
> -void fsl_pcibios_fixup_bus(struct pci_bus *bus)
> -{
> -	struct pci_controller *hose = pci_bus_to_host(bus);
> -	int i, is_pcie = 0, no_link;
> -
> -	/* The root complex bridge comes up with bogus resources,
> -	 * we copy the PHB ones in.
> -	 *
> -	 * With the current generic PCI code, the PHB bus no longer
> -	 * has bus->resource[0..4] set, so things are a bit more
> -	 * tricky.
> -	 */
> -
> -	if (fsl_pcie_bus_fixup)
> -		is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
> -	no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
> -
> -	if (bus->parent == hose->bus && (is_pcie || no_link)) {
> -		for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {

It looks like you're reverting commit
13635dfdc6aa8d2890e02dc441decfcb4ae63e14 ("powerpc/fsl/pci: Fix PCIe
fixup regression"), presumably due to a bad merge conflict resolution.

> @@ -515,7 +507,8 @@ no_bridge:
>  }
>  #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
>  
> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
> +	quirk_fsl_pcie_header);
>  
>  #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
>  struct mpc83xx_pcie_priv {

Ben/Kumar, any comments on this, or on needing to call
fsl_pcibios_fixup_bus on 83xx?

-Scott



More information about the Linuxppc-dev mailing list