mpc85xx_edac.c: Should the mpc85xx_l2_isr be shared irqs?
Scott Wood
scottwood at freescale.com
Wed Jun 26 06:54:03 EST 2013
On Wed, Jul 18, 2012 at 05:00:29PM +0800, Xufeng Zhang wrote:
> Hi All,
>
> I detected below error when booting p1021mds after enabled EDAC feature:
> EDAC MC: Ver: 2.1.0 Jul 17 2012
> Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
> EDAC MC0: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_e
> rr
> IRQ 45/[EDAC] MC err: IRQF_DISABLED is not guaranteed on shared IRQs
> MPC85xx_edac acquired irq 45 for MC
> MPC85xx_edac MC err registered
> EDAC DEVICE0: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_l2_
> err': DEV 'mpc85xx_l2_err' (INTERRUPT)
> mpc85xx_l2_err_probe: Unable to requiest irq 45 for MPC85xx L2 err
>
> Then kernel hang.
>
> When request irq for l2-cache, since it share the same irq with memory
> controller,
> I think the code should be:
> printk(KERN_ERR
>
>
>
>
>
> Thanks,
> Xufeng Zhang
>
>
> --- a/drivers/edac/mpc85xx_edac.c
> +++ b/drivers/edac/mpc85xx_edac.c
> @@ -577,7 +577,7 @@ static int __devinit mpc85xx_l2_err_probe(struct
> of_device *op,
> if (edac_op_state == EDAC_OPSTATE_INT) {
> pdata->irq = irq_of_parse_and_map(op->node, 0);
> res = devm_request_irq(&op->dev, pdata->irq,
> - mpc85xx_l2_isr, IRQF_DISABLED,
> + mpc85xx_l2_isr, IRQF_DISABLED | IRQF_SHARED,
> "[EDAC] L2 err", edac_dev);
> if (res < 0) {
Sorry for the delayed response... That "IRQF_DISABLED is not guaranteed"
message was removed in v2.6.35 (along with the rest of IRQF_DISABLED
support) which was almost two years old even back when your e-mail was
sent. Even back then, as far as I can tell your patch would be
introducing, not fixing, that message.
It does look like this interrupt should be shared, though.
The deprecated IRQF_DISABLED should be removed.
-Scott
More information about the Linuxppc-dev
mailing list