DEBUG_PAGEALLOC on PPC not working (kernels 2.6-25, 3.0-34)

saikia.partha saikia.partha at gmail.com
Wed Jun 19 22:58:27 EST 2013


Hi,

We have two Freescale PowerPC boards on which we're trying to enable
DEBUG_PAGEALLOC with the hope that we'll see an exception whenever some
code tries to modify a page that's been already freed. To test it, we wrote
this sample code -

===
#define BUF_SIZE    4096
void
pagealloc_test(void)
{
    char *buf = kmalloc(BUF_SIZE, GFP_KERNEL);

    if (!buf) {
        printk("%s[%d] - alloc failed!\n", __func__, __LINE__);
        return;
    }
    printk("%s[%d] - alloc'd\n", __func__, __LINE__);
    memset(&buf[0], 0, BUF_SIZE);
    printk("%s[%d] - memset'd\n", __func__, __LINE__);
    kfree(buf);
    printk("%s[%d] - free'd\n", __func__, __LINE__);
    memset(&buf[0], 1, BUF_SIZE);
    printk("%s[%d] - memset'd after free!\n", __func__, __LINE__);
}
===

Here, the last memset() should generate an exception if PAGEALLOC code
correctly unmapped the page during kfree(). However, kernel is happily
running after the memset post-free. Any clue?
Also, the 2nd board has Book-E which has a different MMU architecture.
Here, I saw that the function __change_page_attr() always returns as the
condition v_mapped_by_tlbcam() is true. How do we remove the pte entry from
the TLB in this case?  Has anyone tried DEBUG_PAGEALLOC on Book-E?

Please find the board details below -
Board 1: CPU - e300c4, kernel 2.6-25
====================================
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_IRQ_PER_CPU=y
CONFIG_PPC=y

Board 2: CPU - e500v2, kernel 3.0-34
====================================
# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_32BIT=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_NR_IRQS=512
CONFIG_PPC=y

Regards,
Partha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20130619/f63364cc/attachment.html>


More information about the Linuxppc-dev mailing list