[PATCH 0/4] powerpc: enable relocatable support for 6xx
Kevin Hao
haokexin at gmail.com
Wed Jun 19 19:20:00 EST 2013
This patch series enables the relocatable support for 6xx boards.
With these patches:
* the kernel can boot from any address between 0x10000 ~ 0x2000000
* kdump is workable
* a single kernel image can be used as boot or kdump kernel
Boot test on a mpc8260 board. Also passed the build test for the
following configurations:
ppc40x_defconfig
ppc64e_defconfig
ppc64_defconfig
corenet32_smp_defconfig
corenet64_smp_defconfig
ppc44x_defconfig
pmac32_defconfig
pq2fads_defconfig
mpc5200_defconfig
pseries_defconfig
---
Kevin Hao (4):
powerpc: enable relocatable support for 6xx
powerpc: move the exception trampoline helper functions to a separate
file
powerpc: s/kdump/exception/ for the exception trampoline functions
powerpc: make the kernel bootable from non 0 address for 6xx
arch/powerpc/Kconfig | 4 +-
arch/powerpc/include/asm/exception_trampoline.h | 35 ++++++++
arch/powerpc/include/asm/kdump.h | 32 --------
arch/powerpc/include/asm/page.h | 2 +-
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/crash_dump.c | 41 ----------
arch/powerpc/kernel/exception_trampoline.c | 82 +++++++++++++++++++
arch/powerpc/kernel/head_32.S | 103 ++++++++++++++++++++++++
arch/powerpc/kernel/prom.c | 4 +-
arch/powerpc/kernel/prom_init_check.sh | 2 +-
arch/powerpc/kernel/setup_32.c | 3 +-
arch/powerpc/kernel/setup_64.c | 4 +-
arch/powerpc/mm/ppc_mmu_32.c | 7 +-
13 files changed, 232 insertions(+), 88 deletions(-)
create mode 100644 arch/powerpc/include/asm/exception_trampoline.h
create mode 100644 arch/powerpc/kernel/exception_trampoline.c
--
1.8.1.4
Thanks,
Kevin
More information about the Linuxppc-dev
mailing list