[PATCH] powerpc/sysfs: disable hotplug for the boot cpu

[Zhao Chenhui]

On Wed, Jun 12, 2013 at 01:25:22PM +1000, Benjamin Herrenschmidt wrote:
> On Mon, 2013-06-03 at 18:43 +0800, Zhao Chenhui wrote:
> > On Sat, Jun 01, 2013 at 07:49:44AM +1000, Benjamin Herrenschmidt wrote:
> > > On Tue, 2013-05-28 at 15:59 +0800, Zhao Chenhui wrote:
> > > > Some features depend on the boot cpu, for instance, hibernate/suspend.
> > > > So disable hotplug for the boot cpu.
> > > 
> > > Don't we have code to "move" the boot CPU around when that happens ?
> > > 
> > > Ben.
> > > 
> > 
> > Currently, the code in generic_cpu_disable() likes this:
> > 
> >         if (cpu == boot_cpuid)                                                 
> > 	                return -EBUSY;
> 
> But the code in pseries/hotplug-cpu.c doesn't, we just "move" the boot
> CPU around when that happens. Any reason we can't do that generically ?
> 
> Cheers,
> Ben.
> 

Some multicore SoCs firstly boot up the cpu0 after warm reset.
In some suspend/resume cases, SoC will do a warm reset when resuming.
In order to ensure that the suspending and resuming is running
on a same cpu, cpu0 should be the last cpu to suspend. Here, cpu0 is
the boot_cpuid.

-Chenhui

> > If the dying cpu is the boot cpu, it will return -EBUSY. In the subsequent error handling,
> > cpu_notify_nofail(CPU_DOWN_FAILED) in _cpu_down() will be called. Unfortunately, some
> > cpu notifier callbacks handled CPU_DOWN_PREPARE, but not CPU_DOWN_FAILED, such as sched_cpu_inactive().
> > So it will cause issues.
> > 
> > If we set the hotpluggable for the boot cpu, we can prevent user applications from disabling the boot cpu.
> > 
> > -Chenhui
> >