[PATCH 06/27] powerpc/eeh: Make eeh_init() public

[Gavin Shan]

For EEH on PowerNV platform, we will do EEH probe based on the
real PCI devices. The PCI devices are available after PCI probe.
So we have to call eeh_init() explicitly on PowerNV platform
after PCI probe. The patch also does EEH probe for PowerNV platform
in eeh_init().

Signed-off-by: Gavin Shan <shangw at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/eeh.h       |    8 +++++++-
 arch/powerpc/platforms/pseries/eeh.c |   22 ++++++++++++++++++++--
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 8ba1c39..72611fa 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -132,7 +132,7 @@ struct eeh_ops {
 	char *name;
 	int (*init)(void);
 	void* (*of_probe)(struct device_node *dn, void *flag);
-	void* (*dev_probe)(struct pci_dev *dev, void *flag);
+	int (*dev_probe)(struct pci_dev *dev, void *flag);
 	int (*set_option)(struct eeh_pe *pe, int option);
 	int (*get_pe_addr)(struct eeh_pe *pe);
 	int (*get_state)(struct eeh_pe *pe, int *state);
@@ -196,6 +196,7 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
 
 void *eeh_dev_init(struct device_node *dn, void *data);
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
+int __init eeh_init(void);
 int __init eeh_ops_register(struct eeh_ops *ops);
 int __exit eeh_ops_unregister(const char *name);
 unsigned long eeh_check_failure(const volatile void __iomem *token,
@@ -224,6 +225,11 @@ void eeh_remove_bus_device(struct pci_dev *, int);
 
 #else /* !CONFIG_EEH */
 
+static inline int eeh_init(void)
+{
+	return 0;
+}
+
 static inline void *eeh_dev_init(struct device_node *dn, void *data)
 {
 	return NULL;
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6b73d6c..dbc9d83 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -674,11 +674,21 @@ int __exit eeh_ops_unregister(const char *name)
  * Even if force-off is set, the EEH hardware is still enabled, so that
  * newer systems can boot.
  */
-static int __init eeh_init(void)
+int __init eeh_init(void)
 {
 	struct pci_controller *hose, *tmp;
 	struct device_node *phb;
-	int ret;
+	static int cnt = 0;
+	int ret = 0;
+
+	/*
+	 * We have to delay the initialization on PowerNV after
+	 * the PCI hierarchy tree has been built because the PEs
+	 * are figured out based on PCI devices instead of device
+	 * tree nodes
+	 */
+	if (machine_is(powernv) && cnt++ <= 0)
+		return ret;
 
 	/* call platform initialization function */
 	if (!eeh_ops) {
@@ -700,6 +710,14 @@ static int __init eeh_init(void)
 			phb = hose->dn;
 			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
 		}
+	} else if (eeh_probe_mode_dev()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node)
+			pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
+	} else {
+		pr_warning("%s: Invalid probe mode %d\n",
+			__func__, eeh_probe_mode);
+		return -EINVAL;
 	}
 
 	if (eeh_subsystem_enabled)
-- 
1.7.5.4