IBM OpenPower 720 ipr driver woes
Robert Knight
knight at princeton.edu
Tue Jun 4 11:40:52 EST 2013
On 6/3/2013 8:01 PM, Tony Breeds wrote:
> On Mon, Jun 03, 2013 at 05:20:12PM -0400, Robert Knight wrote:
>
>>> Device tree struct 0x0000000004820000 -> 0x0000000004840000
>>> Calling quiesce...
>>> returning from prom_init
>>> [ 1.376359] ehci-pci 0000:c8:01.2: can't setup
> Can you try adding "debug" to the kernel commandline. We're missing a
> great chunk of detail. If you're starting from scratch either try F18 or
> the F19 Beta (if you're brave :))
>
> Yours Tony
So, two points. Since I have no live disks, I can't copy the dmesg
output in dracut onto a disk and just sent it to you -- the only way
that I know to get it is cut and paste from a HMC console window into a
vi buffer.
I removed rhgb and quiet in addition to adding debug to the kernel
command line in the hope of providing you with information.
My second point is that this failure to connect to the disks happens in
F18 in pretty much the same way -- it always ends with "pata_pdc2027x
... give up!".
Here we go again.
Thank you for being willing to try to help remotely.
-------------- next part --------------
[ 0.000000] Allocated 917504 bytes for 1024 pacas at c0000000076d0000
[ 0.000000] Using pSeries machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap
= 24
[ 0.000000] Found initrd at 0xc000000003800000:0xc0000000047f9800
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Partition configured for 4 cpus.
[ 0.000000] CPU maps initialized for 2 threads per core
[ 0.000000] (thread shift is 1)
[ 0.000000] Freed 851968 bytes for unused pacas
[ 0.000000] Starting Linux PPC64 #1 SMP Wed May 1 13:51:54 MST 2013
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x1a
[ 0.000000] physicalMemorySize = 0xee000000
[ 0.000000] htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.11-100.fc17.ppc64 (mockbuild at ppc-builder7.qa.fe
doraproject.org) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP We
d May 1 13:51:54 MST 2013
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Node 0 Memory: 0x0-0xee000000
[ 0.000000] PCI host bridge /pci at 800000020000002 ranges:
[ 0.000000] IO 0x000003fe00200000..0x000003fe002fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000040080000000..0x00000400bfffffff -> 0x00000000c0000000
[ 0.000000] PCI host bridge /pci at 800000020000003 ranges:
[ 0.000000] IO 0x000003fe00700000..0x000003fe007fffff -> 0x0000000000000000
[ 0.000000] MEM 0x00000401c0000000..0x00000401ffffffff -> 0x00000000c0000000
[ 0.000000] PPC64 nvram contains 7168 bytes
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0xedffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0xedffffff]
[ 0.000000] On node 0 totalpages: 60928
[ 0.000000] DMA zone: 53 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 60875 pages, LIFO batch:1
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] PERCPU: Embedded 2 pages/cpu @c000000001800000 s87168 r0 d43904 u
262144
[ 0.000000] pcpu-alloc: s87168 r0 d43904 u262144 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag
es: 60875
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.11-100.fc17.ppc64 ro
ot=/dev/mapper/vg_narvi-lv_root ro rd.md=0 rd.dm=0 KEYTABLE=us rd.lvm.lv=vg_narv
i/lv_swap rd.luks=0 rd.lvm.lv=vg_narvi/lv_root SYSFONT=True LANG=en_US.UTF-8 deb
ug
[ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[ 0.000000] freeing bootmem node 0
[ 0.000000] Memory: 3766784k/3899392k available (18560k kernel code, 132608k
reserved, 1984k data, 2785k bss, 6912k init)
[ 0.000000] SLUB: Genslabs=19, HWalign=128, Order=0-3, MinObjects=0, CPUs=4,
Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] pic: no ISA interrupt controller
[ 0.000000] time_init: decrementer frequency = 188.043000 MHz
[ 0.000000] time_init: processor frequency = 1504.344000 MHz
[ 0.000000] clocksource: timebase mult[5516408] shift[24] registered
[ 0.000000] clockevent: decrementer mult[30239607] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] allocated 974848 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor
y cgroups
[ 0.010396] pid_max: default: 32768 minimum: 301
[ 0.010532] Security Framework initialized
[ 0.010555] SELinux: Initializing.
[ 0.010575] SELinux: Starting in permissive mode
[ 0.011123] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
[ 0.014271] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
[ 0.015829] Mount-cache hash table entries: 4096
[ 0.025291] Initializing cgroup subsys cpuacct
[ 0.025301] Initializing cgroup subsys memory
[ 0.025488] Initializing cgroup subsys devices
[ 0.025496] Initializing cgroup subsys freezer
[ 0.025504] Initializing cgroup subsys net_cls
[ 0.025513] Initializing cgroup subsys blkio
[ 0.025520] Initializing cgroup subsys perf_event
[ 0.025561] ftrace: allocating 22464 entries in 9 pages
[ 0.042773] EEH: pSeries platform initialized
[ 0.042787] POWER5 performance monitor hardware support registered
[ 0.046436] Brought up 4 CPUs
[ 0.046450] Node 0 CPUs: 0-3 [ 0.048151] devtmpfs: initialized
[ 0.084223] EEH: devices created
[ 0.086942] atomic64 test passed
[ 0.087097] NET: Registered protocol family 16
[ 0.087144] pseries_eeh_init: RTAS service <ibm,get-config-addr-info2> and <i
bm,get-config-addr-info> invalid
[ 0.087155] eeh_init: Failed to call platform init function (-22)
[ 0.087364] IBM eBus Device Driver
[ 0.091962] PCI: Probing PCI hardware
[ 0.092055] PCI host bridge to bus 0000:00
[ 0.092068] pci_bus 0000:00: root bus resource [io 0x10000-0x10ffff] (bus ad
dress [0x0000-0xfffff])
[ 0.092083] pci_bus 0000:00: root bus resource [mem 0x40080000000-0x400bfffff
ff] (bus address [0xc0000000-0xffffffff])
[ 0.092097] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.101004] IOMMU table initialized, virtual merging enabled
[ 0.105916] pci 0000:c8:01.0: supports D1 D2
[ 0.105929] pci 0000:c8:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.108376] pci 0000:c8:01.1: supports D1 D2
[ 0.108386] pci 0000:c8:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.110812] pci 0000:c8:01.2: supports D1 D2
[ 0.110822] pci 0000:c8:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.114267] pci 0000:cc:01.0: supports D1 [ 0.118840] pci 0000:c0:01.0: PME# supported from D0 D3hot D3cold
[ 0.123005] pci 0000:c0:01.1: PME# supported from D0 D3hot D3cold
[ 0.128128] pci 0000:d0:01.0: PME# supported from D0 D3hot D3cold
[ 0.132394] pci 0000:d0:01.1: PME# supported from D0 D3hot D3cold
[ 0.135218] PCI host bridge to bus 0001:00
[ 0.135230] pci_bus 0001:00: root bus resource [io 0x120000-0x21ffff] (bus a
ddress [0x0000-0xfffff])
[ 0.135245] pci_bus 0001:00: root bus resource [mem 0x401c0000000-0x401ffffff
ff] (bus address [0xc0000000-0xffffffff])
[ 0.135259] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.149012] pci 0001:c8:01.0: PME# supported from D0 D3hot D3cold
[ 0.153406] pci 0001:c8:01.1: PME# supported from D0 D3hot D3cold
[ 0.165162] PCI: Probing PCI hardware done
[ 0.165193] opal: Node not found
[ 0.167689] bio: create slab <bio-0> at 0
[ 0.167992] vgaarb: loaded
[ 0.168146] SCSI subsystem initialized
[ 0.168224] libata version 3.00 loaded.
[ 0.168317] usbcore: registered new interface driver usbfs
[ 0.168345] usbcore: registered new interface driver hub
[ 0.168407] usbcore: registered new device driver usb
[ 0.168766] NetLabel: Initializing
[ 0.168774] NetLabel: domain hash size = 128 [ 0.168780] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.168811] NetLabel: unlabeled traffic allowed by default
[ 0.169041] Switching to clocksource timebase
[ 0.192701] NET: Registered protocol family 2
[ 0.193026] TCP established hash table entries: 32768 (order: 3, 524288 bytes
)
[ 0.193445] TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
[ 0.193804] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.193846] TCP: reno registered
[ 0.193859] UDP hash table entries: 2048 (order: 0, 65536 bytes)
[ 0.193923] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
[ 0.194112] NET: Registered protocol family 1
[ 0.309531] pci 0000:c8:01.2: enabling device (0140 -> 0142)
[ 0.310778] PCI: CLS 128 bytes, default 128
[ 0.310876] Unpacking initramfs...
[ 1.101738] Freeing initrd memory: 16384k freed
[ 1.102578] RTAS daemon started
[ 1.103547] RTAS: event: 14, Type: Platform Error, Severity: 2
[ 1.103949] pseries_idle_driver registered
[ 1.104295] audit: initializing netlink socket (disabled)
[ 1.104326] type=2000 audit(1370322269.090:1): initialized
[ 1.364540] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 1.368592] VFS: Disk quotas dquot_6.5.2
[ 1.368747] Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[ 1.369961] msgmni has been set to 7516
[ 1.370178] SELinux: Registering netfilter hooks
[ 1.371311] alg: No test for stdrng (krng)
[ 1.371335] NET: Registered protocol family 38
[ 1.371440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
52)
[ 1.371502] io scheduler noop registered
[ 1.371510] io scheduler deadline registered
[ 1.371536] io scheduler cfq registered (default)
[ 1.371729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.372753] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.373487] Linux agpgart interface v0.103
[ 1.375442] loop: module loaded
[ 1.375525] Uniform Multi-Platform E-IDE driver
[ 1.375593] ide-gd driver 1.18
[ 1.375904] libphy: Fixed MDIO Bus: probed
[ 1.376023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.376046] ehci-pci: EHCI PCI platform driver
[ 1.376238] ehci-pci 0000:c8:01.2: enabling device (0140 -> 0142)
[ 1.376650] ehci-pci 0000:c8:01.2: EHCI Host Controller
[ 1.376755] ehci-pci 0000:c8:01.2: new USB bus registered, assigned bus numbe
r 1 [ 1.377184] ehci-pci 0000:c8:01.2: can't setup
[ 1.377197] ehci-pci 0000:c8:01.2: USB bus 1 deregistered
[ 1.377567] ehci-pci 0000:c8:01.2: init 0000:c8:01.2 fail, -19
[ 1.377598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.389160] ohci_hcd 0000:c8:01.0: Refused to change power state, currently i
n D3
[ 1.389322] ohci_hcd 0000:c8:01.0: OHCI Host Controller
[ 1.389429] ohci_hcd 0000:c8:01.0: new USB bus registered, assigned bus numbe
r 1
[ 11.389147] ohci_hcd 0000:c8:01.0: USB HC takeover failed! (BIOS/SMM bug)
[ 11.389161] ohci_hcd 0000:c8:01.0: can't setup
[ 11.389172] ohci_hcd 0000:c8:01.0: USB bus 1 deregistered
[ 11.389572] ohci_hcd 0000:c8:01.0: init 0000:c8:01.0 fail, -16
[ 11.389586] ohci_hcd: probe of 0000:c8:01.0 failed with error -16
[ 11.409162] ohci_hcd 0000:c8:01.1: Refused to change power state, currently i
n D3
[ 11.409334] ohci_hcd 0000:c8:01.1: OHCI Host Controller
[ 11.409562] ohci_hcd 0000:c8:01.1: new USB bus registered, assigned bus numbe
r 1
[ 21.409088] ohci_hcd 0000:c8:01.1: USB HC takeover failed! (BIOS/SMM bug)
[ 21.409102] ohci_hcd 0000:c8:01.1: can't setup
[ 21.409113] ohci_hcd 0000:c8:01.1: USB bus 1 deregistered
[ 21.409495] ohci_hcd 0000:c8:01.1: init 0000:c8:01.1 fail, -16 [ 21.409508] ohci_hcd: probe of 0000:c8:01.1 failed with error -16
[ 21.409604] uhci_hcd: USB Universal Host Controller Interface driver
[ 21.410032] usbcore: registered new interface driver usbserial
[ 21.410069] usbcore: registered new interface driver usbserial_generic
[ 21.410091] usbserial: USB Serial support registered for generic
[ 21.410402] mousedev: PS/2 mouse device common for all mice
[ 21.410711] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 21.410969] device-mapper: uevent: version 1.0.3
[ 21.411142] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-d
evel at redhat.com
[ 21.411279] cpuidle: using governor ladder
[ 21.411423] cpuidle: using governor menu
[ 21.411733] usbcore: registered new interface driver usbhid
[ 21.411741] usbhid: USB HID core driver
[ 21.411820] drop_monitor: Initializing network drop monitor service
[ 21.411990] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.412026] TCP: cubic registered
[ 21.412034] Initializing XFRM netlink socket
[ 21.412297] NET: Registered protocol family 10
[ 21.412687] mip6: Mobile IPv6
[ 21.412697] NET: Registered protocol family 17
[ 21.412859] Running MSI bitmap self-tests ...
[ 21.416401] PM: Hibernation image not present or could not be loaded. [ 21.416428] registered taskstats version 1
[ 21.424596] rtc-generic rtc-generic: setting system clock to 2013-06-04 05:04
:50 UTC (1370322290)
[ 21.428021] Freeing unused kernel memory: 6912k freed
[ 21.567622] dracut: dracut-018-105.git20120927.fc17
[ 21.680580] udevd[112]: starting version 182
[ 21.791462] dracut: Starting plymouth daemon
[ 21.926482] pata_pdc2027x 0000:cc:01.0: version 1.0
[ 21.926719] pata_pdc2027x 0000:cc:01.0: enabling device (0000 -> 0003)
[ 21.938847] ipr: IBM Power RAID SCSI Device Driver version: 2.5.4 (July 11, 2
012)
[ 21.939061] ipr 0001:d0:01.0: Found IOA with IRQ: 151
[ 21.942276] ipr 0001:d0:01.0: Write of cache line size failed
[ 21.942584] ipr: probe of 0001:d0:01.0 failed with error -5
[ 22.027478] pata_pdc2027x 0000:cc:01.0: PLL input clock 0 kHz
[ 22.027493] pata_pdc2027x: Invalid PLL input clock 0kHz, give up!
[ 22.029939] scsi1 : pata_pdc2027x
[ 22.030669] scsi2 : pata_pdc2027x
[ 22.030809] ata1: PATA max UDMA/133 mmio m16384 at 0x400b0000000 cmd 0x400b00017
c0 irq 118
[ 22.030824] ata2: PATA max UDMA/133 mmio m16384 at 0x400b0000000 cmd 0x400b00015
c0 irq 118
[ 22.189135] pata_pdc2027x: 40-conductor cable detected on port 0 [ 22.349130] pata_pdc2027x: 40-conductor cable detected on port 1
[ 43.699176] dracut Warning: Unable to process initqueue
[ 43.704038] dracut Warning: /dev/mapper/vg_narvi-lv_root does not exist
[ 43.704543] dracut Warning: /dev/vg_narvi/lv_root does not exist
[ 43.705036] dracut Warning: /dev/vg_narvi/lv_swap does not exist
More information about the Linuxppc-dev
mailing list