[1/1] MPC831x: fix PCI express probing

Scott Wood scottwood at freescale.com
Tue Jul 30 10:19:13 EST 2013


On Mon, May 27, 2013 at 02:29:43PM +0200, Sergey Gerasimov wrote:
> For MPC831x the bus probing function also needs the fixup to assign
> addresses to the PCI devices as it was for MPC85xx and MPC86xx.
> The fixup of the bridge vendor and device ID should be done early in
> PCI probing. Else the bridge is not detected as FIXUP_HEADER is called
> too late.
> 
> Signed-off-by: Sergey Gerasimov <Sergey.Gerasimov at astrosoft-development.com>
> 
> ---
> arch/powerpc/sysdev/fsl_pci.c | 68 +++++++++++++++++++------------------------
>  1 file changed, 30 insertions(+), 38 deletions(-)
> 
> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
> index 028ac1f..94d1bd4 100644
> --- a/arch/powerpc/sysdev/fsl_pci.c
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> @@ -84,6 +84,34 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
>  	return 0;
>  }
>  
> +void fsl_pcibios_fixup_bus(struct pci_bus *bus)
> +{
> +	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
> +	int i;
> +
> +
> +	if ((bus->parent == hose->bus)
> +		&& ((fsl_pcie_bus_fixup
> +			&& pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP))
> +			|| (hose->indirect_type
> +				& PPC_INDIRECT_TYPE_NO_PCIE_LINK))) {
> +		for (i = 0; i < 4; ++i) {
> +			struct resource *res = bus->resource[i];
> +			struct resource *par = bus->parent->resource[i];
> +			if (res) {
> +				res->start = 0;
> +				res->end   = 0;
> +				res->flags = 0;
> +			}
> +			if (res && par) {
> +				res->start = par->start;
> +				res->end   = par->end;
> +				res->flags = par->flags;
> +			}
> +		}
> +	}
> +}

Why are you moving this function?  This makes it hardaer to see the
changes you make -- and is likely the cause of unintended changes being
made due to a bad conflict resolution.  In particular, you seem to be
reverting commit 13635dfdc6aa8d2890e02dc441decfcb4ae63e14
("powerpc/fsl/pci: Fix PCIe fixup regression").

Also please confirm that the problem still exists in after "Fix PCIe
fixup regression".

-Scott



More information about the Linuxppc-dev mailing list