[PATCH v6 3/3] DMA: Freescale: update driver to support 8-channel DMA engine

hongbo.zhang at freescale.com hongbo.zhang at freescale.com
Fri Jul 26 20:27:16 EST 2013


From: Hongbo Zhang <hongbo.zhang at freescale.com>

This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.

Signed-off-by: Hongbo Zhang <hongbo.zhang at freescale.com>
---
 drivers/dma/Kconfig  |    9 +++++----
 drivers/dma/fsldma.c |    9 ++++++---
 drivers/dma/fsldma.h |    2 +-
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6825957..3979c65 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -89,14 +89,15 @@ config AT_HDMAC
 	  Support the Atmel AHB DMA controller.
 
 config FSL_DMA
-	tristate "Freescale Elo and Elo Plus DMA support"
+	tristate "Freescale Elo series DMA support"
 	depends on FSL_SOC
 	select DMA_ENGINE
 	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	---help---
-	  Enable support for the Freescale Elo and Elo Plus DMA controllers.
-	  The Elo is the DMA controller on some 82xx and 83xx parts, and the
-	  Elo Plus is the DMA controller on 85xx and 86xx parts.
+	  Enable support for the Freescale Elo series DMA controllers.
+	  The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
+	  EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
+	  some Txxx and Bxxx parts.
 
 config MPC512X_DMA
 	tristate "Freescale MPC512x built-in DMA engine support"
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 49e8fbd..16a9a48 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1261,7 +1261,9 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
 	WARN_ON(fdev->feature != chan->feature);
 
 	chan->dev = fdev->dev;
-	chan->id = ((res.start - 0x100) & 0xfff) >> 7;
+	chan->id = (res.start & 0xfff) < 0x300 ?
+		   ((res.start - 0x100) & 0xfff) >> 7 :
+		   ((res.start - 0x200) & 0xfff) >> 7;
 	if (chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
 		dev_err(fdev->dev, "too many channels for device\n");
 		err = -EINVAL;
@@ -1434,6 +1436,7 @@ static int fsldma_of_remove(struct platform_device *op)
 }
 
 static const struct of_device_id fsldma_of_ids[] = {
+	{ .compatible = "fsl,elo3-dma", },
 	{ .compatible = "fsl,eloplus-dma", },
 	{ .compatible = "fsl,elo-dma", },
 	{}
@@ -1455,7 +1458,7 @@ static struct platform_driver fsldma_of_driver = {
 
 static __init int fsldma_init(void)
 {
-	pr_info("Freescale Elo / Elo Plus DMA driver\n");
+	pr_info("Freescale Elo series DMA driver\n");
 	return platform_driver_register(&fsldma_of_driver);
 }
 
@@ -1467,5 +1470,5 @@ static void __exit fsldma_exit(void)
 subsys_initcall(fsldma_init);
 module_exit(fsldma_exit);
 
-MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver");
+MODULE_DESCRIPTION("Freescale Elo series DMA driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index f5c3879..1ffc244 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -112,7 +112,7 @@ struct fsldma_chan_regs {
 };
 
 struct fsldma_chan;
-#define FSL_DMA_MAX_CHANS_PER_DEVICE 4
+#define FSL_DMA_MAX_CHANS_PER_DEVICE 8
 
 struct fsldma_device {
 	void __iomem *regs;	/* DGSR register base */
-- 
1.7.9.5





More information about the Linuxppc-dev mailing list