[PATCH 1/2] Powerpc: Add voltage ranges support for T4

[Haijun Zhang]

Special voltages that can be support by eSDHC of T4 in esdhc node.

Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
Signed-off-by: Anton Vorontsov <cbouatmailru at gmail.com>
---
 Documentation/devicetree/bindings/mmc/fsl-esdhc.txt | 3 +++
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi         | 1 +
 2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index bd9be0b..4aeae6e 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -19,6 +19,8 @@ Optional properties:
     "bus-width = <1>" property.
   - sdhci,auto-cmd12: specifies that a controller can only handle auto
     CMD12.
+  - 3300 3300: specifies that eSDHC controller can support voltages ranges
+    from 3300 to 3300. This is an optional.
 
 Example:
 
@@ -29,4 +31,5 @@ sdhci at 2e000 {
 	interrupt-parent = <&ipic>;
 	/* Filled in by U-Boot */
 	clock-frequency = <0>;
+	voltage-ranges = <3300 3300>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index bd611a9..1ef2d2d 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -399,6 +399,7 @@
 	sdhc at 114000 {
 		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
 		sdhci,auto-cmd12;
+		voltage-ranges = <1800 1800 3300 3300>;
 	};
 /include/ "qoriq-i2c-0.dtsi"
 /include/ "qoriq-i2c-1.dtsi"
-- 
1.8.0