[PATCH 02/10] powerpc/eeh: Export functions for hotplug

[Gavin Shan]

Make some functions public in order to support hotplug on either specific
PCI bus or PCI device in future.

Signed-off-by: Gavin Shan <shangw at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/eeh.h |    9 +++++++++
 arch/powerpc/kernel/eeh.c      |    6 +++---
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 09a8743..d9d35c2 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -209,9 +209,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_build(void);
+void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
+void eeh_remove_device(struct pci_dev *, int);
 void eeh_remove_bus_device(struct pci_dev *, int);
 
 /**
@@ -252,12 +255,18 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
 
 static inline void eeh_addr_cache_build(void) { }
 
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
+static inline void eeh_remove_device(struct pci_dev *dev, int purge_pe) { }
+
 static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index b5c425e..582ad1e 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -836,7 +836,7 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 
@@ -884,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -972,7 +972,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 {
 	struct eeh_dev *edev;
 
-- 
1.7.5.4