[PATCH v1 05/24] clk: wrap I/O access for improved portability
Gerhard Sittig
gsi at denx.de
Tue Jul 16 04:47:34 EST 2013
the common clock drivers were motivated/initiated by ARM development
and apparently assume little endian peripherals
wrap register/peripherals access in the common code (div, gate, mux)
in preparation of adding COMMON_CLK support for other platforms
Signed-off-by: Gerhard Sittig <gsi at denx.de>
---
drivers/clk/clk-divider.c | 6 +++---
drivers/clk/clk-gate.c | 6 +++---
drivers/clk/clk-mux.c | 6 +++---
include/linux/clk-provider.h | 17 +++++++++++++++++
4 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 6d55eb2..2c07061 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -104,7 +104,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
struct clk_divider *divider = to_clk_divider(hw);
unsigned int div, val;
- val = readl(divider->reg) >> divider->shift;
+ val = clk_readl(divider->reg) >> divider->shift;
val &= div_mask(divider);
div = _get_div(divider, val);
@@ -230,11 +230,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
val = div_mask(divider) << (divider->shift + 16);
} else {
- val = readl(divider->reg);
+ val = clk_readl(divider->reg);
val &= ~(div_mask(divider) << divider->shift);
}
val |= value << divider->shift;
- writel(val, divider->reg);
+ clk_writel(val, divider->reg);
if (divider->lock)
spin_unlock_irqrestore(divider->lock, flags);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 790306e..b7fbd96 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -58,7 +58,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
if (set)
reg |= BIT(gate->bit_idx);
} else {
- reg = readl(gate->reg);
+ reg = clk_readl(gate->reg);
if (set)
reg |= BIT(gate->bit_idx);
@@ -66,7 +66,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
reg &= ~BIT(gate->bit_idx);
}
- writel(reg, gate->reg);
+ clk_writel(reg, gate->reg);
if (gate->lock)
spin_unlock_irqrestore(gate->lock, flags);
@@ -89,7 +89,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
u32 reg;
struct clk_gate *gate = to_clk_gate(hw);
- reg = readl(gate->reg);
+ reg = clk_readl(gate->reg);
/* if a set bit disables this clk, flip it before masking */
if (gate->flags & CLK_GATE_SET_TO_DISABLE)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 614444c..02ef506 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -42,7 +42,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
* OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
* val = 0x4 really means "bit 2, index starts at bit 0"
*/
- val = readl(mux->reg) >> mux->shift;
+ val = clk_readl(mux->reg) >> mux->shift;
val &= mux->mask;
if (mux->table) {
@@ -89,11 +89,11 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
if (mux->flags & CLK_MUX_HIWORD_MASK) {
val = mux->mask << (mux->shift + 16);
} else {
- val = readl(mux->reg);
+ val = clk_readl(mux->reg);
val &= ~(mux->mask << mux->shift);
}
val |= index << mux->shift;
- writel(val, mux->reg);
+ clk_writel(val, mux->reg);
if (mux->lock)
spin_unlock_irqrestore(mux->lock, flags);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1ec14a7..c4f7799 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -12,6 +12,7 @@
#define __LINUX_CLK_PROVIDER_H
#include <linux/clk.h>
+#include <linux/io.h>
#ifdef CONFIG_COMMON_CLK
@@ -490,5 +491,21 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
#define of_clk_init(matches) \
{ while (0); }
#endif /* CONFIG_OF */
+
+/*
+ * wrap access to peripherals in accessor routines
+ * for improved portability across platforms
+ */
+
+static inline u32 clk_readl(u32 __iomem *reg)
+{
+ return readl(reg);
+}
+
+static inline void clk_writel(u32 val, u32 __iomem *reg)
+{
+ writel(val, reg);
+}
+
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PROVIDER_H */
--
1.7.10.4
More information about the Linuxppc-dev
mailing list