[PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h

Felipe Balbi balbi at ti.com
Mon Jan 14 18:48:58 EST 2013


On Mon, Jan 14, 2013 at 03:18:17PM +0800, Peter Chen wrote:
> It changes the driver to use platform_device_id rather than cpu_is_xxx
> to determine the SoC type, and updates the platform code accordingly.
> Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
> Tested at mx51 bbg board, it works ok after enable phy clock
> (Need another patch to fix this problem)
> Signed-off-by: Peter Chen <peter.chen at freescale.com>

not good for -rc. You have to break this down as you're solving at least
three different problems with this patch.

Besides there are parts which are not related to the build break.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20130114/abb4c364/attachment.sig>

More information about the Linuxppc-dev mailing list